omap: pdata-quirks: remove openpandora quirks for mmc3 and wl1251

With a wl1251 child node of mmc3 in the device tree decoded
in omap_hsmmc.c to handle special wl1251 initialization, we do
no longer need to instantiate the mmc3 through pdata quirks.

We also can remove the wlan regulator and reset/interrupt definitions
and do them through device tree.

Fixes: 81eef6c ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: <stable@vger.kernel.org> # v4.7+
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

arch/arm/mach-omap2/pdata-quirks.c

@@ -310,108 +310,15 @@ static void __init omap3_logicpd_torpedo_init(void)
 }
 
 /* omap3pandora legacy devices */
-#define PANDORA_WIFI_IRQ_GPIO		21
-#define PANDORA_WIFI_NRESET_GPIO	23
 
 static struct platform_device pandora_backlight = {
 	.name	= "pandora-backlight",
 	.id	= -1,
 };
 
-static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
-};
-
-static struct regulator_init_data pandora_vmmc3 = {
-	.constraints = {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc3_supply),
-	.consumer_supplies	= pandora_vmmc3_supply,
-};
-
-static struct fixed_voltage_config pandora_vwlan = {
-	.supply_name		= "vwlan",
-	.microvolts		= 1800000, /* 1.8V */
-	.gpio			= PANDORA_WIFI_NRESET_GPIO,
-	.startup_delay		= 50000, /* 50ms */
-	.enable_high		= 1,
-	.init_data		= &pandora_vmmc3,
-};
-
-static struct platform_device pandora_vwlan_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data = &pandora_vwlan,
-	},
-};
-
-static void pandora_wl1251_init_card(struct mmc_card *card)
-{
-	/*
-	 * We have TI wl1251 attached to MMC3. Pass this information to
-	 * SDIO core because it can't be probed by normal methods.
-	 */
-	if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
-		card->quirks |= MMC_QUIRK_NONSTD_SDIO;
-		card->cccr.wide_bus = 1;
-		card->cis.vendor = 0x104c;
-		card->cis.device = 0x9066;
-		card->cis.blksize = 512;
-		card->cis.max_dtr = 24000000;
-		card->ocr = 0x80;
-	}
-}
-
-static struct omap2_hsmmc_info pandora_mmc3[] = {
-	{
-		.mmc		= 3,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.init_card	= pandora_wl1251_init_card,
-	},
-	{}	/* Terminator */
-};
-
-static void __init pandora_wl1251_init(void)
-{
-	struct wl1251_platform_data pandora_wl1251_pdata;
-	int ret;
-
-	memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
-
-	pandora_wl1251_pdata.power_gpio = -1;
-
-	ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq");
-	if (ret < 0)
-		goto fail;
-
-	pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
-	if (pandora_wl1251_pdata.irq < 0)
-		goto fail_irq;
-
-	pandora_wl1251_pdata.use_eeprom = true;
-	ret = wl1251_set_platform_data(&pandora_wl1251_pdata);
-	if (ret < 0)
-		goto fail_irq;
-
-	return;
-
-fail_irq:
-	gpio_free(PANDORA_WIFI_IRQ_GPIO);
-fail:
-	pr_err("wl1251 board initialisation failed\n");
-}
-
 static void __init omap3_pandora_legacy_init(void)
 {
 	platform_device_register(&pandora_backlight);
-	platform_device_register(&pandora_vwlan_device);
-	omap_hsmmc_init(pandora_mmc3);
-	omap_hsmmc_late_init(pandora_mmc3);
-	pandora_wl1251_init();
 }
 #endif /* CONFIG_ARCH_OMAP3 */