Merge tag 'asoc-v4.2-2' into asoc-next

ASoC: Further updates for v4.2

There's a bunch of additional updates and fixes that came in since my
orignal pull request here, including DT support for rt5645 and fairly
large serieses of cleanups and improvements to tas2552 and rcar.

# gpg: Signature made Mon 22 Jun 2015 10:24:48 BST using RSA key ID 5D5487D0
# gpg: Oops: keyid_from_fingerprint: no pubkey
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

Documentation/devicetree/bindings/sound/mt8173-max98090.txt

@@ -0,0 +1,13 @@
+MT8173 with MAX98090 CODEC
+
+Required properties:
+- compatible : "mediatek,mt8173-max98090"
+- mediatek,audio-codec: the phandle of the MAX98090 audio codec
+
+Example:
+
+	sound {
+		compatible = "mediatek,mt8173-max98090";
+		mediatek,audio-codec = <&max98090>;
+	};
+

Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt

@@ -0,0 +1,13 @@
+MT8173 with RT5650 RT5676 CODECS
+
+Required properties:
+- compatible : "mediatek,mt8173-rt5650-rt5676"
+- mediatek,audio-codec: the phandles of rt5650 and rt5676 codecs
+
+Example:
+
+	sound {
+		compatible = "mediatek,mt8173-rt5650-rt5676";
+		mediatek,audio-codec = <&rt5650 &rt5676>;
+	};
+

Documentation/devicetree/bindings/sound/mtk-afe-pcm.txt

@@ -0,0 +1,45 @@
+Mediatek AFE PCM controller
+
+Required properties:
+- compatible = "mediatek,mt8173-afe-pcm";
+- reg: register location and size
+- interrupts: Should contain AFE interrupt
+- clock-names: should have these clock names:
+		"infra_sys_audio_clk",
+		"top_pdn_audio",
+		"top_pdn_aud_intbus",
+		"bck0",
+		"bck1",
+		"i2s0_m",
+		"i2s1_m",
+		"i2s2_m",
+		"i2s3_m",
+		"i2s3_b";
+
+Example:
+
+	afe: mt8173-afe-pcm@11220000  {
+		compatible = "mediatek,mt8173-afe-pcm";
+		reg = <0 0x11220000 0 0x1000>;
+		interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_FALLING>;
+		clocks = <&infracfg INFRA_AUDIO>,
+			<&topckgen TOP_AUDIO_SEL>,
+			<&topckgen TOP_AUD_INTBUS_SEL>,
+			<&topckgen TOP_APLL1_DIV0>,
+			<&topckgen TOP_APLL2_DIV0>,
+			<&topckgen TOP_I2S0_M_CK_SEL>,
+			<&topckgen TOP_I2S1_M_CK_SEL>,
+			<&topckgen TOP_I2S2_M_CK_SEL>,
+			<&topckgen TOP_I2S3_M_CK_SEL>,
+			<&topckgen TOP_I2S3_B_CK_SEL>;
+		clock-names = "infra_sys_audio_clk",
+				"top_pdn_audio",
+				"top_pdn_aud_intbus",
+				"bck0",
+				"bck1",
+				"i2s0_m",
+				"i2s1_m",
+				"i2s2_m",
+				"i2s3_m",
+				"i2s3_b";
+	};

Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt

@@ -0,0 +1,60 @@
+* Qualcomm Technologies APQ8016 SBC ASoC machine driver
+
+This node models the Qualcomm Technologies APQ8016 SBC ASoC machine driver
+
+Required properties:
+
+- compatible		: "qcom,apq8016-sbc-sndcard"
+
+- pinctrl-N		: One property must exist for each entry in
+			  pinctrl-names.  See ../pinctrl/pinctrl-bindings.txt
+			  for details of the property values.
+- pinctrl-names		: Must contain a "default" entry.
+- reg			: Must contain an address for each entry in reg-names.
+- reg-names		: A list which must include the following entries:
+				* "mic-iomux"
+				* "spkr-iomux"
+- qcom,model		: Name of the sound card.
+
+Dai-link subnode properties and subnodes:
+
+Required dai-link subnodes:
+
+- cpu					: CPU   sub-node
+- codec					: CODEC sub-node
+
+Required CPU/CODEC subnodes properties:
+
+-link-name		: Name of the dai link.
+-sound-dai		: phandle and port of CPU/CODEC
+-capture-dai		: phandle and port of CPU/CODEC
+
+Example:
+
+sound: sound {
+	compatible = "qcom,apq8016-sbc-sndcard";
+	reg = <0x07702000 0x4>, <0x07702004 0x4>;
+	reg-names = "mic-iomux", "spkr-iomux";
+	qcom,model = "DB410c";
+
+	/* I2S - Internal codec */
+	internal-dai-link@0 {
+		cpu { /* PRIMARY */
+			sound-dai = <&lpass MI2S_PRIMARY>;
+		};
+		codec {
+			sound-dai = <&wcd_codec 0>;
+		};
+	};
+
+	/* External Primary or External Secondary -ADV7533 HDMI */
+	external-dai-link@0 {
+		link-name = "ADV7533";
+		cpu { /* QUAT */
+			sound-dai = <&lpass MI2S_QUATERNARY>;
+		};
+		codec {
+			sound-dai = <&adv_bridge 0>;
+		};
+	};
+};

Documentation/devicetree/bindings/sound/rt5645.txt

@@ -0,0 +1,72 @@
+RT5650/RT5645 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : One of "realtek,rt5645" or "realtek,rt5650".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+Optional properties:
+
+- hp-detect-gpios:
+  a GPIO spec for the external headphone detect pin. If jd-mode = 0,
+  we will get the JD status by getting the value of hp-detect-gpios.
+
+- realtek,in2-differential
+  Boolean. Indicate MIC2 input are differential, rather than single-ended.
+
+- realtek,dmic1-data-pin
+  0: dmic1 is not used
+  1: using IN2P pin as dmic1 data pin
+  2: using GPIO6 pin as dmic1 data pin
+  3: using GPIO10 pin as dmic1 data pin
+  4: using GPIO12 pin as dmic1 data pin
+
+- realtek,dmic2-data-pin
+  0: dmic2 is not used
+  1: using IN2N pin as dmic2 data pin
+  2: using GPIO5 pin as dmic2 data pin
+  3: using GPIO11 pin as dmic2 data pin
+
+-- realtek,jd-mode : The JD mode of rt5645/rt5650
+   0 : rt5645/rt5650 JD function is not used
+   1 : Mode-0 (VDD=3.3V), two port jack detection
+   2 : Mode-1 (VDD=3.3V), one port jack detection
+   3 : Mode-2 (VDD=1.8V), one port jack detection
+
+Pins on the device (for linking into audio routes) for RT5645/RT5650:
+
+  * DMIC L1
+  * DMIC R1
+  * DMIC L2
+  * DMIC R2
+  * IN1P
+  * IN1N
+  * IN2P
+  * IN2N
+  * Haptic Generator
+  * HPOL
+  * HPOR
+  * LOUTL
+  * LOUTR
+  * PDM1L
+  * PDM1R
+  * SPOL
+  * SPOR
+
+Example:
+
+codec: rt5650@1a {
+	compatible = "realtek,rt5650";
+	reg = <0x1a>;
+	hp-detect-gpios = <&gpio 19 0>;
+	interrupt-parent = <&gpio>;
+	interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+	realtek,dmic-en = "true";
+	realtek,en-jd-func = "true";
+	realtek,jd-mode = <3>;
+};

Documentation/devicetree/bindings/sound/simple-card.txt

@@ -16,7 +16,8 @@ Optional properties:
 					  connection's sink, the second being the connection's
 					  source.
 - simple-audio-card,mclk-fs             : Multiplication factor between stream rate and codec
-  					  mclk.
+					  mclk. When defined, mclk-fs property defined in
+					  dai-link sub nodes are ignored.
 - simple-audio-card,hp-det-gpio		: Reference to GPIO that signals when
 					  headphones are attached.
 - simple-audio-card,mic-det-gpio	: Reference to GPIO that signals when
@@ -55,6 +56,9 @@ Optional dai-link subnode properties:
 					  dai-link uses bit clock inversion.
 - frame-inversion			: bool property. Add this if the
 					  dai-link uses frame clock inversion.
+- mclk-fs             			: Multiplication factor between stream
+					  rate and codec mclk, applied only for
+					  the dai-link.
 
 For backward compatibility the frame-master and bitclock-master
 properties can be used as booleans in codec subnode to indicate if the

Documentation/devicetree/bindings/sound/tas2552.txt

@@ -14,6 +14,12 @@ Required properties:
 Optional properties:
 	- enable-gpio - gpio pin to enable/disable the device
 
+tas2552 can receive it's reference clock via MCLK, BCLK, IVCLKIN pin or use the
+internal 1.8MHz. This CLKIN is used by the PLL. In addition to PLL, the PDM
+reference clock is also selectable: PLL, IVCLKIN, BCLK or MCLK.
+For system integration the dt-bindings/sound/tas2552.h header file provides
+defined values to selct and configure the PLL and PDM reference clocks.
+
 Example:
 
 tas2552: tas2552@41 {

include/sound/rt5645.h

@@ -20,9 +20,6 @@ struct rt5645_platform_data {
 	unsigned int dmic2_data_pin;
 	/* 0 = IN2P; 1 = GPIO6; 2 = GPIO10; 3 = GPIO12 */
 
-	unsigned int hp_det_gpio;
-	bool gpio_hp_det_active_high;
-
 	unsigned int jd_mode;
 };
 

sound/soc/Kconfig

@@ -45,6 +45,7 @@ source "sound/soc/nuc900/Kconfig"
 source "sound/soc/omap/Kconfig"
 source "sound/soc/kirkwood/Kconfig"
 source "sound/soc/intel/Kconfig"
+source "sound/soc/mediatek/Kconfig"
 source "sound/soc/mxs/Kconfig"
 source "sound/soc/pxa/Kconfig"
 source "sound/soc/qcom/Kconfig"

sound/soc/Makefile

@@ -24,6 +24,7 @@ obj-$(CONFIG_SND_SOC)	+= dwc/
 obj-$(CONFIG_SND_SOC)	+= fsl/
 obj-$(CONFIG_SND_SOC)	+= jz4740/
 obj-$(CONFIG_SND_SOC)	+= intel/
+obj-$(CONFIG_SND_SOC)	+= mediatek/
 obj-$(CONFIG_SND_SOC)	+= mxs/
 obj-$(CONFIG_SND_SOC)	+= nuc900/
 obj-$(CONFIG_SND_SOC)	+= omap/

sound/soc/atmel/Kconfig

@@ -9,21 +9,32 @@ config SND_ATMEL_SOC
 if SND_ATMEL_SOC
 
 config SND_ATMEL_SOC_PDC
-	bool
+	tristate
+	default m if SND_ATMEL_SOC_SSC_PDC=m && SND_ATMEL_SOC_SSC=m
+	default y if SND_ATMEL_SOC_SSC_PDC=y || (SND_ATMEL_SOC_SSC_PDC=m && SND_ATMEL_SOC_SSC=y)
+
+config SND_ATMEL_SOC_SSC_PDC
+	tristate
 
 config SND_ATMEL_SOC_DMA
-	bool
+	tristate
 	select SND_SOC_GENERIC_DMAENGINE_PCM
+	default m if SND_ATMEL_SOC_SSC_DMA=m && SND_ATMEL_SOC_SSC=m
+	default y if SND_ATMEL_SOC_SSC_DMA=y || (SND_ATMEL_SOC_SSC_DMA=m && SND_ATMEL_SOC_SSC=y)
+
+config SND_ATMEL_SOC_SSC_DMA
+	tristate
 
 config SND_ATMEL_SOC_SSC
 	tristate
+	default y if SND_ATMEL_SOC_SSC_DMA=y || SND_ATMEL_SOC_SSC_PDC=y
+	default m if SND_ATMEL_SOC_SSC_DMA=m || SND_ATMEL_SOC_SSC_PDC=m
 
 config SND_AT91_SOC_SAM9G20_WM8731
 	tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board"
 	depends on ARCH_AT91 || COMPILE_TEST
 	depends on ATMEL_SSC && SND_SOC_I2C_AND_SPI
-	select SND_ATMEL_SOC_PDC
-	select SND_ATMEL_SOC_SSC
+	select SND_ATMEL_SOC_SSC_PDC
 	select SND_SOC_WM8731
 	help
 	  Say Y if you want to add support for SoC audio on WM8731-based
@@ -33,8 +44,7 @@ config SND_ATMEL_SOC_WM8904
 	tristate "Atmel ASoC driver for boards using WM8904 codec"
 	depends on ARCH_AT91 || COMPILE_TEST
 	depends on ATMEL_SSC && I2C
-	select SND_ATMEL_SOC_SSC
-	select SND_ATMEL_SOC_DMA
+	select SND_ATMEL_SOC_SSC_DMA
 	select SND_SOC_WM8904
 	help
 	  Say Y if you want to add support for Atmel ASoC driver for boards using
@@ -44,8 +54,7 @@ config SND_AT91_SOC_SAM9X5_WM8731
 	tristate "SoC Audio support for WM8731-based at91sam9x5 board"
 	depends on ARCH_AT91 || COMPILE_TEST
 	depends on ATMEL_SSC && SND_SOC_I2C_AND_SPI
-	select SND_ATMEL_SOC_SSC
-	select SND_ATMEL_SOC_DMA
+	select SND_ATMEL_SOC_SSC_DMA
 	select SND_SOC_WM8731
 	help
 	  Say Y if you want to add support for audio SoC on an

sound/soc/atmel/Makefile

@@ -1,8 +1,10 @@
 # AT91 Platform Support
-snd-soc-atmel-pcm-$(CONFIG_SND_ATMEL_SOC_PDC) := atmel-pcm-pdc.o
-snd-soc-atmel-pcm-$(CONFIG_SND_ATMEL_SOC_DMA) += atmel-pcm-dma.o
-snd-soc-atmel_ssc_dai-objs := atmel_ssc_dai.o $(snd-soc-atmel-pcm-y)
+snd-soc-atmel-pcm-pdc-objs := atmel-pcm-pdc.o
+snd-soc-atmel-pcm-dma-objs := atmel-pcm-dma.o
+snd-soc-atmel_ssc_dai-objs := atmel_ssc_dai.o
 
+obj-$(CONFIG_SND_ATMEL_SOC_PDC) += snd-soc-atmel-pcm-pdc.o
+obj-$(CONFIG_SND_ATMEL_SOC_DMA) += snd-soc-atmel-pcm-dma.o
 obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o
 
 # AT91 Machine Support

sound/soc/codecs/Kconfig

@@ -509,6 +509,11 @@ config SND_SOC_RL6231
 	default m if SND_SOC_RT5670=m
 	default m if SND_SOC_RT5677=m
 
+config SND_SOC_RL6347A
+	tristate
+	default y if SND_SOC_RT286=y
+	default m if SND_SOC_RT286=m
+
 config SND_SOC_RT286
 	tristate
 	depends on I2C

sound/soc/codecs/Makefile

@@ -77,6 +77,7 @@ snd-soc-pcm512x-objs := pcm512x.o
 snd-soc-pcm512x-i2c-objs := pcm512x-i2c.o
 snd-soc-pcm512x-spi-objs := pcm512x-spi.o
 snd-soc-rl6231-objs := rl6231.o
+snd-soc-rl6347a-objs := rl6347a.o
 snd-soc-rt286-objs := rt286.o
 snd-soc-rt5631-objs := rt5631.o
 snd-soc-rt5640-objs := rt5640.o
@@ -263,6 +264,7 @@ obj-$(CONFIG_SND_SOC_PCM512x)	+= snd-soc-pcm512x.o
 obj-$(CONFIG_SND_SOC_PCM512x_I2C)	+= snd-soc-pcm512x-i2c.o
 obj-$(CONFIG_SND_SOC_PCM512x_SPI)	+= snd-soc-pcm512x-spi.o
 obj-$(CONFIG_SND_SOC_RL6231)	+= snd-soc-rl6231.o
+obj-$(CONFIG_SND_SOC_RL6347A)	+= snd-soc-rl6347a.o
 obj-$(CONFIG_SND_SOC_RT286)	+= snd-soc-rt286.o
 obj-$(CONFIG_SND_SOC_RT5631)	+= snd-soc-rt5631.o
 obj-$(CONFIG_SND_SOC_RT5640)	+= snd-soc-rt5640.o

sound/soc/codecs/max98090.c

@@ -27,7 +27,7 @@
 #include "max98090.h"
 
 /* Allows for sparsely populated register maps */
-static struct reg_default max98090_reg[] = {
+static const struct reg_default max98090_reg[] = {
 	{ 0x00, 0x00 }, /* 00 Software Reset */
 	{ 0x03, 0x04 }, /* 03 Interrupt Masks */
 	{ 0x04, 0x00 }, /* 04 System Clock Quick */
@@ -2704,7 +2704,7 @@ static const struct of_device_id max98090_of_match[] = {
 MODULE_DEVICE_TABLE(of, max98090_of_match);
 
 #ifdef CONFIG_ACPI
-static struct acpi_device_id max98090_acpi_match[] = {
+static const struct acpi_device_id max98090_acpi_match[] = {
 	{ "193C9890", MAX98090 },
 	{ }
 };