powerpc/xive: Fix offset for store EOI MMIOs

Architecturally we should apply a 0x400 offset for these. Not doing
it will break future HW implementations.

The offset of 0 is supposed to remain for "triggers" though not all
sources support both trigger and store EOI, and in P9 specifically,
some sources will treat 0 as a store EOI. But future chips will not.
So this makes us use the properly architected offset which should work
always.

Fixes: 243e251 ("powerpc/xive: Native exploitation of the XIVE interrupt controller")
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

arch/powerpc/include/asm/xive.h

@@ -94,11 +94,13 @@ struct xive_q {
  * store at 0 and some ESBs support doing a trigger via a
  * separate trigger page.
  */
-#define XIVE_ESB_GET		0x800
-#define XIVE_ESB_SET_PQ_00	0xc00
-#define XIVE_ESB_SET_PQ_01	0xd00
-#define XIVE_ESB_SET_PQ_10	0xe00
-#define XIVE_ESB_SET_PQ_11	0xf00
+#define XIVE_ESB_STORE_EOI	0x400 /* Store */
+#define XIVE_ESB_LOAD_EOI	0x000 /* Load */
+#define XIVE_ESB_GET		0x800 /* Load */
+#define XIVE_ESB_SET_PQ_00	0xc00 /* Load */
+#define XIVE_ESB_SET_PQ_01	0xd00 /* Load */
+#define XIVE_ESB_SET_PQ_10	0xe00 /* Load */
+#define XIVE_ESB_SET_PQ_11	0xf00 /* Load */
 
 #define XIVE_ESB_VAL_P		0x2
 #define XIVE_ESB_VAL_Q		0x1

arch/powerpc/kvm/book3s_xive_template.c

@@ -69,7 +69,7 @@ static void GLUE(X_PFX,source_eoi)(u32 hw_irq, struct xive_irq_data *xd)
 {
 	/* If the XIVE supports the new "store EOI facility, use it */
 	if (xd->flags & XIVE_IRQ_FLAG_STORE_EOI)
-		__x_writeq(0, __x_eoi_page(xd));
+		__x_writeq(0, __x_eoi_page(xd) + XIVE_ESB_STORE_EOI);
 	else if (hw_irq && xd->flags & XIVE_IRQ_FLAG_EOI_FW) {
 		opal_int_eoi(hw_irq);
 	} else {
@@ -89,7 +89,7 @@ static void GLUE(X_PFX,source_eoi)(u32 hw_irq, struct xive_irq_data *xd)
 		 * properly.
 		 */
 		if (xd->flags & XIVE_IRQ_FLAG_LSI)
-			__x_readq(__x_eoi_page(xd));
+			__x_readq(__x_eoi_page(xd) + XIVE_ESB_LOAD_EOI);
 		else {
 			eoi_val = GLUE(X_PFX,esb_load)(xd, XIVE_ESB_SET_PQ_00);
 

arch/powerpc/sysdev/xive/common.c

@@ -297,7 +297,7 @@ void xive_do_source_eoi(u32 hw_irq, struct xive_irq_data *xd)
 {
 	/* If the XIVE supports the new "store EOI facility, use it */
 	if (xd->flags & XIVE_IRQ_FLAG_STORE_EOI)
-		out_be64(xd->eoi_mmio, 0);
+		out_be64(xd->eoi_mmio + XIVE_ESB_STORE_EOI, 0);
 	else if (hw_irq && xd->flags & XIVE_IRQ_FLAG_EOI_FW) {
 		/*
 		 * The FW told us to call it. This happens for some