drm/msm/dsi: Add a PHY op that initializes version specific stuff

Create an init() op for dsi_phy which sets up things specific to a given DSI PHY. The dsi_phy driver probe expects every DSI version to get a "dsi_phy_regulator" mmio base. This isn't the case for 8x96. Creating an init() op will allow us to accommodate such differences. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
mariux64 · Feb 6, 2017 · 25c45d8 · 25c45d8
1 parent 3a3ff88
commit 25c45d8
Show file tree

Hide file tree

Showing 5 changed files with 30 additions and 9 deletions.
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -295,6 +295,24 @@ static int dsi_phy_get_id(struct msm_dsi_phy *phy)
 	return -EINVAL;
 }
 
+int msm_dsi_phy_init_common(struct msm_dsi_phy *phy)
+{
+	struct platform_device *pdev = phy->pdev;
+	int ret = 0;
+
+	phy->reg_base = msm_ioremap(pdev, "dsi_phy_regulator",
+				"DSI_PHY_REG");
+	if (IS_ERR(phy->reg_base)) {
+		dev_err(&pdev->dev, "%s: failed to map phy regulator base\n",
+			__func__);
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+fail:
+	return ret;
+}
+
 static int dsi_phy_driver_probe(struct platform_device *pdev)
 {
 	struct msm_dsi_phy *phy;
@@ -331,15 +349,6 @@ static int dsi_phy_driver_probe(struct platform_device *pdev)
 		goto fail;
 	}
 
-	phy->reg_base = msm_ioremap(pdev, "dsi_phy_regulator",
-				"DSI_PHY_REG");
-	if (IS_ERR(phy->reg_base)) {
-		dev_err(dev, "%s: failed to map phy regulator base\n",
-			__func__);
-		ret = -ENOMEM;
-		goto fail;
-	}
-
 	ret = dsi_phy_regulator_init(phy);
 	if (ret) {
 		dev_err(dev, "%s: failed to init regulator\n", __func__);
@@ -353,6 +362,12 @@ static int dsi_phy_driver_probe(struct platform_device *pdev)
 		goto fail;
 	}
 
+	if (phy->cfg->ops.init) {
+		ret = phy->cfg->ops.init(phy);
+		if (ret)
+			goto fail;
+	}
+
 	/* PLL init will call into clk_register which requires
 	 * register access, so we need to enable power and ahb clock.
 	 */

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -22,6 +22,7 @@
 #define dsi_phy_write(offset, data) msm_writel((data), (offset))
 
 struct msm_dsi_phy_ops {
+	int (*init) (struct msm_dsi_phy *phy);
 	int (*enable)(struct msm_dsi_phy *phy, int src_pll_id,
 		const unsigned long bit_rate, const unsigned long esc_rate);
 	void (*disable)(struct msm_dsi_phy *phy);
@@ -87,6 +88,7 @@ int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing,
 	const unsigned long bit_rate, const unsigned long esc_rate);
 void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg,
 				u32 bit_mask);
+int msm_dsi_phy_init_common(struct msm_dsi_phy *phy);
 
 #endif /* __DSI_PHY_H__ */
 
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c
@@ -145,6 +145,7 @@ const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs = {
 	.ops = {
 		.enable = dsi_20nm_phy_enable,
 		.disable = dsi_20nm_phy_disable,
+		.init = msm_dsi_phy_init_common,
 	},
 	.io_start = { 0xfd998300, 0xfd9a0300 },
 	.num_dsi_phy = 2,

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
@@ -144,6 +144,7 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs = {
 	.ops = {
 		.enable = dsi_28nm_phy_enable,
 		.disable = dsi_28nm_phy_disable,
+		.init = msm_dsi_phy_init_common,
 	},
 	.io_start = { 0xfd922b00, 0xfd923100 },
 	.num_dsi_phy = 2,
@@ -161,6 +162,7 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs = {
 	.ops = {
 		.enable = dsi_28nm_phy_enable,
 		.disable = dsi_28nm_phy_disable,
+		.init = msm_dsi_phy_init_common,
 	},
 	.io_start = { 0x1a98500 },
 	.num_dsi_phy = 1,

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
@@ -191,6 +191,7 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs = {
 	.ops = {
 		.enable = dsi_28nm_phy_enable,
 		.disable = dsi_28nm_phy_disable,
+		.init = msm_dsi_phy_init_common,
 	},
 	.io_start = { 0x4700300, 0x5800300 },
 	.num_dsi_phy = 2,