ARM: dts: Use simple-pm-bus for genpd for am3 l4_per

We can now enable simple-pm-bus to use genpd.

Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/am33xx-l4.dtsi

@@ -851,7 +851,10 @@
 };
 
 &l4_per {						/* 0x48000000 */
-	compatible = "ti,am33xx-l4-per", "simple-bus";
+	compatible = "ti,am33xx-l4-per", "simple-pm-bus";
+	power-domains = <&prm_per>;
+	clocks = <&l4ls_clkctrl AM3_L4LS_L4_LS_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x48000000 0x800>,
 	      <0x48000800 0x800>,
 	      <0x48001000 0x400>,
@@ -869,7 +872,7 @@
 		 <0x46400000 0x46400000 0x400000>;	/* l3 data port */
 
 	segment@0 {					/* 0x48000000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -1480,7 +1483,7 @@
 	};
 
 	segment@100000 {					/* 0x48100000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0008c000 0x0018c000 0x001000>,	/* ap 42 */
@@ -1864,7 +1867,7 @@
 	};
 
 	segment@200000 {					/* 0x48200000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00200000 0x010000>;
@@ -1888,7 +1891,7 @@
 	};
 
 	segment@300000 {					/* 0x48300000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00300000 0x001000>,	/* ap 66 */