Merge branch 'next/devel-samsung' of git://git.kernel.org/pub/scm/lin…

…ux/kernel/git/kgene/linux-samsung into next/soc2

* 'next/devel-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: Support Suspend/Resume for EXYNOS4412
  ARM: EXYNOS: To use common config for EXYNOS4 and EXYNOS5 SPI
  ARM: EXYNOS: Support DMA for EXYNOS5250 SoC
  ARM: EXYNOS: Add platform resource definitions for FIMC-LITE
  ARM: EXYNOS: add platform device for core DRM subsystem
  ARM: EXYNOS: add dts files to dtbs target
  spi/s3c64xx: Allow usage for ARCH_S3C24XX
  ARM: S3C24XX: Add HSSPI setup callback for s3c64xx-spi driver
  ARM: S3C24XX: Add clock-lookup entries required by s3c64xx-spi
  ARM: S3C24XX: Add map entries needed by the s3c64xx-spi devices
  ARM: S3C24XX: claim spi channels for hsspi in dma-s3c2443
  ARM: S3C24XX: Add forgotten clock lookup table to S3C2443

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/mach-exynos/Kconfig

@@ -61,6 +61,7 @@ config SOC_EXYNOS5250
 	bool "SAMSUNG EXYNOS5250"
 	default y
 	depends on ARCH_EXYNOS5
+	select SAMSUNG_DMADEV
 	help
 	  Enable EXYNOS5250 SoC support
 
@@ -70,7 +71,7 @@ config EXYNOS4_MCT
 	help
 	  Use MCT (Multi Core Timer) as kernel timers
 
-config EXYNOS4_DEV_DMA
+config EXYNOS_DEV_DMA
 	bool
 	help
 	  Compile in amba device definitions for DMA controller
@@ -80,6 +81,11 @@ config EXYNOS4_DEV_AHCI
 	help
 	  Compile in platform device definitions for AHCI
 
+config EXYNOS_DEV_DRM
+	bool
+	help
+	  Compile in platform device definitions for core DRM device
+
 config EXYNOS4_SETUP_FIMD0
 	bool
 	help
@@ -161,7 +167,7 @@ config EXYNOS4_SETUP_USB_PHY
 	help
 	  Common setup code for USB PHY controller
 
-config EXYNOS4_SETUP_SPI
+config EXYNOS_SETUP_SPI
 	bool
 	help
 	  Common setup code for SPI GPIO configurations.
@@ -223,7 +229,7 @@ config MACH_ARMLEX4210
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select EXYNOS4_DEV_AHCI
-	select EXYNOS4_DEV_DMA
+	select EXYNOS_DEV_DMA
 	select EXYNOS4_SETUP_SDHCI
 	help
 	  Machine support for Samsung ARMLEX4210 based on EXYNOS4210
@@ -350,7 +356,7 @@ config MACH_SMDK4212
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_PWM
 	select EXYNOS_DEV_SYSMMU
-	select EXYNOS4_DEV_DMA
+	select EXYNOS_DEV_DMA
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C7

arch/arm/mach-exynos/Makefile

@@ -50,10 +50,11 @@ obj-$(CONFIG_MACH_EXYNOS5_DT)		+= mach-exynos5-dt.o
 obj-y					+= dev-uart.o
 obj-$(CONFIG_ARCH_EXYNOS4)		+= dev-audio.o
 obj-$(CONFIG_EXYNOS4_DEV_AHCI)		+= dev-ahci.o
-obj-$(CONFIG_EXYNOS_DEV_SYSMMU)		+= dev-sysmmu.o
 obj-$(CONFIG_EXYNOS4_DEV_DWMCI)		+= dev-dwmci.o
-obj-$(CONFIG_EXYNOS4_DEV_DMA)		+= dma.o
+obj-$(CONFIG_EXYNOS_DEV_DMA)		+= dma.o
 obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI)	+= dev-ohci.o
+obj-$(CONFIG_EXYNOS_DEV_DRM)		+= dev-drm.o
+obj-$(CONFIG_EXYNOS_DEV_SYSMMU)		+= dev-sysmmu.o
 
 obj-$(CONFIG_ARCH_EXYNOS)		+= setup-i2c0.o
 obj-$(CONFIG_EXYNOS4_SETUP_FIMC)	+= setup-fimc.o
@@ -68,4 +69,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_I2C7)	+= setup-i2c7.o
 obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
 obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY)	+= setup-usb-phy.o
-obj-$(CONFIG_EXYNOS4_SETUP_SPI)		+= setup-spi.o
+obj-$(CONFIG_EXYNOS_SETUP_SPI)		+= setup-spi.o

arch/arm/mach-exynos/Makefile.boot

@@ -1,2 +1,5 @@
    zreladdr-y	+= 0x40008000
 params_phys-y	:= 0x40000100
+
+dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb
+dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb

arch/arm/mach-exynos/clock-exynos4212.c

@@ -92,6 +92,16 @@ static struct clk init_clocks_off[] = {
 		.devname	= SYSMMU_CLOCK_DEVNAME(isp, 9),
 		.enable		= exynos4212_clk_ip_isp1_ctrl,
 		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "flite",
+		.devname	= "exynos-fimc-lite.0",
+		.enable		= exynos4212_clk_ip_isp0_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "flite",
+		.devname	= "exynos-fimc-lite.1",
+		.enable		= exynos4212_clk_ip_isp0_ctrl,
+		.ctrlbit	= (1 << 3),
 	}
 };
 

arch/arm/mach-exynos/dev-drm.c

@@ -0,0 +1,29 @@
+/*
+ * linux/arch/arm/mach-exynos/dev-drm.c
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS - core DRM device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+
+#include <plat/devs.h>
+
+static u64 exynos_drm_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device exynos_device_drm = {
+	.name	= "exynos-drm",
+	.dev	= {
+		.dma_mask		= &exynos_drm_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};

arch/arm/mach-exynos/dma.c

@@ -103,10 +103,45 @@ static u8 exynos4212_pdma0_peri[] = {
 	DMACH_MIPI_HSI5,
 };
 
-struct dma_pl330_platdata exynos4_pdma0_pdata;
+static u8 exynos5250_pdma0_peri[] = {
+	DMACH_PCM0_RX,
+	DMACH_PCM0_TX,
+	DMACH_PCM2_RX,
+	DMACH_PCM2_TX,
+	DMACH_SPI0_RX,
+	DMACH_SPI0_TX,
+	DMACH_SPI2_RX,
+	DMACH_SPI2_TX,
+	DMACH_I2S0S_TX,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S2_RX,
+	DMACH_I2S2_TX,
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART2_RX,
+	DMACH_UART2_TX,
+	DMACH_UART4_RX,
+	DMACH_UART4_TX,
+	DMACH_SLIMBUS0_RX,
+	DMACH_SLIMBUS0_TX,
+	DMACH_SLIMBUS2_RX,
+	DMACH_SLIMBUS2_TX,
+	DMACH_SLIMBUS4_RX,
+	DMACH_SLIMBUS4_TX,
+	DMACH_AC97_MICIN,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_PCMOUT,
+	DMACH_MIPI_HSI0,
+	DMACH_MIPI_HSI2,
+	DMACH_MIPI_HSI4,
+	DMACH_MIPI_HSI6,
+};
+
+static struct dma_pl330_platdata exynos_pdma0_pdata;
 
-static AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330,
-	EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos4_pdma0_pdata);
+static AMBA_AHB_DEVICE(exynos_pdma0, "dma-pl330.0", 0x00041330,
+	EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos_pdma0_pdata);
 
 static u8 exynos4210_pdma1_peri[] = {
 	DMACH_PCM0_RX,
@@ -169,10 +204,45 @@ static u8 exynos4212_pdma1_peri[] = {
 	DMACH_MIPI_HSI7,
 };
 
-static struct dma_pl330_platdata exynos4_pdma1_pdata;
+static u8 exynos5250_pdma1_peri[] = {
+	DMACH_PCM0_RX,
+	DMACH_PCM0_TX,
+	DMACH_PCM1_RX,
+	DMACH_PCM1_TX,
+	DMACH_SPI1_RX,
+	DMACH_SPI1_TX,
+	DMACH_PWM,
+	DMACH_SPDIF,
+	DMACH_I2S0S_TX,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S1_RX,
+	DMACH_I2S1_TX,
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART1_RX,
+	DMACH_UART1_TX,
+	DMACH_UART3_RX,
+	DMACH_UART3_TX,
+	DMACH_SLIMBUS1_RX,
+	DMACH_SLIMBUS1_TX,
+	DMACH_SLIMBUS3_RX,
+	DMACH_SLIMBUS3_TX,
+	DMACH_SLIMBUS5_RX,
+	DMACH_SLIMBUS5_TX,
+	DMACH_SLIMBUS0AUX_RX,
+	DMACH_SLIMBUS0AUX_TX,
+	DMACH_DISP1,
+	DMACH_MIPI_HSI1,
+	DMACH_MIPI_HSI3,
+	DMACH_MIPI_HSI5,
+	DMACH_MIPI_HSI7,
+};
 
-static AMBA_AHB_DEVICE(exynos4_pdma1,  "dma-pl330.1", 0x00041330,
-	EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos4_pdma1_pdata);
+static struct dma_pl330_platdata exynos_pdma1_pdata;
+
+static AMBA_AHB_DEVICE(exynos_pdma1,  "dma-pl330.1", 0x00041330,
+	EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos_pdma1_pdata);
 
 static u8 mdma_peri[] = {
 	DMACH_MTOM_0,
@@ -185,46 +255,63 @@ static u8 mdma_peri[] = {
 	DMACH_MTOM_7,
 };
 
-static struct dma_pl330_platdata exynos4_mdma1_pdata = {
+static struct dma_pl330_platdata exynos_mdma1_pdata = {
 	.nr_valid_peri = ARRAY_SIZE(mdma_peri),
 	.peri_id = mdma_peri,
 };
 
-static AMBA_AHB_DEVICE(exynos4_mdma1,  "dma-pl330.2", 0x00041330,
-	EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos4_mdma1_pdata);
+static AMBA_AHB_DEVICE(exynos_mdma1,  "dma-pl330.2", 0x00041330,
+	EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos_mdma1_pdata);
 
-static int __init exynos4_dma_init(void)
+static int __init exynos_dma_init(void)
 {
 	if (of_have_populated_dt())
 		return 0;
 
 	if (soc_is_exynos4210()) {
-		exynos4_pdma0_pdata.nr_valid_peri =
+		exynos_pdma0_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4210_pdma0_peri);
-		exynos4_pdma0_pdata.peri_id = exynos4210_pdma0_peri;
-		exynos4_pdma1_pdata.nr_valid_peri =
+		exynos_pdma0_pdata.peri_id = exynos4210_pdma0_peri;
+		exynos_pdma1_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4210_pdma1_peri);
-		exynos4_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
+		exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
 	} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
-		exynos4_pdma0_pdata.nr_valid_peri =
+		exynos_pdma0_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4212_pdma0_peri);
-		exynos4_pdma0_pdata.peri_id = exynos4212_pdma0_peri;
-		exynos4_pdma1_pdata.nr_valid_peri =
+		exynos_pdma0_pdata.peri_id = exynos4212_pdma0_peri;
+		exynos_pdma1_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4212_pdma1_peri);
-		exynos4_pdma1_pdata.peri_id = exynos4212_pdma1_peri;
+		exynos_pdma1_pdata.peri_id = exynos4212_pdma1_peri;
+	} else if (soc_is_exynos5250()) {
+		exynos_pdma0_pdata.nr_valid_peri =
+			ARRAY_SIZE(exynos5250_pdma0_peri);
+		exynos_pdma0_pdata.peri_id = exynos5250_pdma0_peri;
+		exynos_pdma1_pdata.nr_valid_peri =
+			ARRAY_SIZE(exynos5250_pdma1_peri);
+		exynos_pdma1_pdata.peri_id = exynos5250_pdma1_peri;
+
+		exynos_pdma0_device.res.start = EXYNOS5_PA_PDMA0;
+		exynos_pdma0_device.res.end = EXYNOS5_PA_PDMA0 + SZ_4K;
+		exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_PDMA0;
+		exynos_pdma1_device.res.start = EXYNOS5_PA_PDMA1;
+		exynos_pdma1_device.res.end = EXYNOS5_PA_PDMA1 + SZ_4K;
+		exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_PDMA1;
+		exynos_mdma1_device.res.start = EXYNOS5_PA_MDMA1;
+		exynos_mdma1_device.res.end = EXYNOS5_PA_MDMA1 + SZ_4K;
+		exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_MDMA1;
 	}
 
-	dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask);
-	dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask);
-	amba_device_register(&exynos4_pdma0_device, &iomem_resource);
+	dma_cap_set(DMA_SLAVE, exynos_pdma0_pdata.cap_mask);
+	dma_cap_set(DMA_CYCLIC, exynos_pdma0_pdata.cap_mask);
+	amba_device_register(&exynos_pdma0_device, &iomem_resource);
 
-	dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask);
-	dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask);
-	amba_device_register(&exynos4_pdma1_device, &iomem_resource);
+	dma_cap_set(DMA_SLAVE, exynos_pdma1_pdata.cap_mask);
+	dma_cap_set(DMA_CYCLIC, exynos_pdma1_pdata.cap_mask);
+	amba_device_register(&exynos_pdma1_device, &iomem_resource);
 
-	dma_cap_set(DMA_MEMCPY, exynos4_mdma1_pdata.cap_mask);
-	amba_device_register(&exynos4_mdma1_device, &iomem_resource);
+	dma_cap_set(DMA_MEMCPY, exynos_mdma1_pdata.cap_mask);
+	amba_device_register(&exynos_mdma1_device, &iomem_resource);
 
 	return 0;
 }
-arch_initcall(exynos4_dma_init);
+arch_initcall(exynos_dma_init);

arch/arm/mach-exynos/include/mach/map.h

@@ -34,6 +34,9 @@
 
 #define EXYNOS4_PA_JPEG			0x11840000
 
+/* x = 0...1 */
+#define EXYNOS4_PA_FIMC_LITE(x)		(0x12390000 + ((x) * 0x10000))
+
 #define EXYNOS4_PA_G2D			0x12800000
 
 #define EXYNOS4_PA_I2S0			0x03830000

arch/arm/mach-exynos/include/mach/regs-pmu.h

@@ -177,7 +177,7 @@
 
 #define S5P_PMU_LCD1_CONF		S5P_PMUREG(0x3CA0)
 
-/* Only for EXYNOS4212 */
+/* Only for EXYNOS4x12 */
 #define S5P_ISP_ARM_LOWPWR			S5P_PMUREG(0x1050)
 #define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR	S5P_PMUREG(0x1054)
 #define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR	S5P_PMUREG(0x1058)
@@ -218,4 +218,12 @@
 #define S5P_SECSS_MEM_OPTION			S5P_PMUREG(0x2EC8)
 #define S5P_ROTATOR_MEM_OPTION			S5P_PMUREG(0x2F48)
 
+/* Only for EXYNOS4412 */
+#define S5P_ARM_CORE2_LOWPWR			S5P_PMUREG(0x1020)
+#define S5P_DIS_IRQ_CORE2			S5P_PMUREG(0x1024)
+#define S5P_DIS_IRQ_CENTRAL2			S5P_PMUREG(0x1028)
+#define S5P_ARM_CORE3_LOWPWR			S5P_PMUREG(0x1030)
+#define S5P_DIS_IRQ_CORE3			S5P_PMUREG(0x1034)
+#define S5P_DIS_IRQ_CENTRAL3			S5P_PMUREG(0x1038)
+
 #endif /* __ASM_ARCH_REGS_PMU_H */

arch/arm/mach-exynos/include/mach/spi-clocks.h

@@ -11,6 +11,6 @@
 #define __ASM_ARCH_SPI_CLKS_H __FILE__
 
 /* Must source from SCLK_SPI */
-#define EXYNOS4_SPI_SRCCLK_SCLK		0
+#define EXYNOS_SPI_SRCCLK_SCLK		0
 
 #endif /* __ASM_ARCH_SPI_CLKS_H */

arch/arm/mach-exynos/pm.c

@@ -313,7 +313,7 @@ static int exynos4_pm_suspend(void)
 	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
 	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
 
-	if (soc_is_exynos4212()) {
+	if (soc_is_exynos4212() || soc_is_exynos4412()) {
 		tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION);
 		tmp &= ~(S5P_USE_STANDBYWFI_ISP_ARM |
 			 S5P_USE_STANDBYWFE_ISP_ARM);