Merge branch 'for-next' into for-linus

.gitignore

@@ -39,6 +39,7 @@
 *.o.*
 *.patch
 *.rmeta
+*.rpm
 *.rsi
 *.s
 *.so

.mailmap

@@ -130,6 +130,7 @@ Domen Puncer <domen@coderock.org>
 Douglas Gilbert <dougg@torque.net>
 Ed L. Cashin <ecashin@coraid.com>
 Erik Kaneda <erik.kaneda@intel.com> <erik.schmauss@intel.com>
+Eugen Hristev <eugen.hristev@collabora.com> <eugen.hristev@microchip.com>
 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
 Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> <ezequiel@collabora.com>
 Felipe W Damasio <felipewd@terra.com.br>
@@ -214,6 +215,7 @@ Jisheng Zhang <jszhang@kernel.org> <jszhang@marvell.com>
 Jisheng Zhang <jszhang@kernel.org> <Jisheng.Zhang@synaptics.com>
 Johan Hovold <johan@kernel.org> <jhovold@gmail.com>
 Johan Hovold <johan@kernel.org> <johan@hovoldconsulting.com>
+John Crispin <john@phrozen.org> <blogic@openwrt.org>
 John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
 John Stultz <johnstul@us.ibm.com>
 Jordan Crouse <jordan@cosmicpenguin.net> <jcrouse@codeaurora.org>
@@ -371,6 +373,7 @@ Rémi Denis-Courmont <rdenis@simphalempin.com>
 Ricardo Ribalda <ribalda@kernel.org> <ricardo@ribalda.com>
 Ricardo Ribalda <ribalda@kernel.org> Ricardo Ribalda Delgado <ribalda@kernel.org>
 Ricardo Ribalda <ribalda@kernel.org> <ricardo.ribalda@gmail.com>
+Robert Foss <rfoss@kernel.org> <robert.foss@linaro.org>
 Roman Gushchin <roman.gushchin@linux.dev> <guro@fb.com>
 Roman Gushchin <roman.gushchin@linux.dev> <guroan@gmail.com>
 Roman Gushchin <roman.gushchin@linux.dev> <klamm@yandex-team.ru>
@@ -422,6 +425,7 @@ Tony Luck <tony.luck@intel.com>
 TripleX Chung <xxx.phy@gmail.com> <triplex@zh-kernel.org>
 TripleX Chung <xxx.phy@gmail.com> <zhongyu@18mail.cn>
 Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
+Tudor Ambarus <tudor.ambarus@linaro.org> <tudor.ambarus@microchip.com>
 Tycho Andersen <tycho@tycho.pizza> <tycho@tycho.ws>
 Tzung-Bi Shih <tzungbi@kernel.org> <tzungbi@google.com>
 Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>

CREDITS

@@ -1173,6 +1173,10 @@ D: Future Domain TMC-16x0 SCSI driver (author)
 D: APM driver (early port)
 D: DRM drivers (author of several)
 
+N: Veaceslav Falico
+E: vfalico@gmail.com
+D: Co-maintainer and co-author of the network bonding driver.
+
 N: János Farkas
 E: chexum@shadow.banki.hu
 D: romfs, various (mostly networking) fixes
@@ -2489,6 +2493,13 @@ D: XF86_Mach8
 D: XF86_8514
 D: cfdisk (curses based disk partitioning program)
 
+N: Mat Martineau
+E: mat@martineau.name
+D: MPTCP subsystem co-maintainer 2020-2023
+D: Keyctl restricted keyring and Diffie-Hellman UAPI
+D: Bluetooth L2CAP ERTM mode and AMP
+S: USA
+
 N: John S. Marvin
 E: jsm@fc.hp.com
 D: PA-RISC port
@@ -4172,6 +4183,10 @@ S: B-1206 Jingmao Guojigongyu
 S: 16 Baliqiao Nanjie, Beijing 101100
 S: People's Repulic of China
 
+N: Vlad Yasevich
+E: vyasevich@gmail.com
+D: SCTP protocol maintainer.
+
 N: Aviad Yehezkel
 E: aviadye@nvidia.com
 D: Kernel TLS implementation and offload support.

Documentation/ABI/testing/debugfs-pktcdvd

@@ -0,0 +1,18 @@
+What:           /sys/kernel/debug/pktcdvd/pktcdvd[0-7]
+Date:           Oct. 2006
+KernelVersion:  2.6.20
+Contact:        Thomas Maier <balagi@justmail.de>
+Description:
+
+The pktcdvd module (packet writing driver) creates
+these files in debugfs:
+
+/sys/kernel/debug/pktcdvd/pktcdvd[0-7]/
+
+    ====            ====== ====================================
+    info            0444   Lots of driver statistics and infos.
+    ====            ====== ====================================
+
+Example::
+
+    cat /sys/kernel/debug/pktcdvd/pktcdvd0/info

Documentation/ABI/testing/sysfs-class-pktcdvd

@@ -0,0 +1,97 @@
+sysfs interface
+---------------
+The pktcdvd module (packet writing driver) creates the following files in the
+sysfs: (<devid> is in the format major:minor)
+
+What:		/sys/class/pktcdvd/add
+What:		/sys/class/pktcdvd/remove
+What:		/sys/class/pktcdvd/device_map
+Date:		Oct. 2006
+KernelVersion:	2.6.20
+Contact:	Thomas Maier <balagi@justmail.de>
+Description:
+
+		==========	==============================================
+		add		(WO) Write a block device id (major:minor) to
+				create a new pktcdvd device and map it to the
+				block device.
+
+		remove		(WO) Write the pktcdvd device id (major:minor)
+				to remove the pktcdvd device.
+
+		device_map	(RO) Shows the device mapping in format:
+				pktcdvd[0-7] <pktdevid> <blkdevid>
+		==========	==============================================
+
+
+What:		/sys/class/pktcdvd/pktcdvd[0-7]/dev
+What:		/sys/class/pktcdvd/pktcdvd[0-7]/uevent
+Date:		Oct. 2006
+KernelVersion:	2.6.20
+Contact:	Thomas Maier <balagi@justmail.de>
+Description:
+		dev:	(RO) Device id
+
+		uevent:	(WO) To send a uevent
+
+
+What:		/sys/class/pktcdvd/pktcdvd[0-7]/stat/packets_started
+What:		/sys/class/pktcdvd/pktcdvd[0-7]/stat/packets_finished
+What:		/sys/class/pktcdvd/pktcdvd[0-7]/stat/kb_written
+What:		/sys/class/pktcdvd/pktcdvd[0-7]/stat/kb_read
+What:		/sys/class/pktcdvd/pktcdvd[0-7]/stat/kb_read_gather
+What:		/sys/class/pktcdvd/pktcdvd[0-7]/stat/reset
+Date:		Oct. 2006
+KernelVersion:	2.6.20
+Contact:	Thomas Maier <balagi@justmail.de>
+Description:
+		packets_started:	(RO) Number of started packets.
+
+		packets_finished:	(RO) Number of finished packets.
+
+		kb_written:		(RO) kBytes written.
+
+		kb_read:		(RO) kBytes read.
+
+		kb_read_gather:		(RO) kBytes read to fill write packets.
+
+		reset:			(WO) Write any value to it to reset
+					pktcdvd device statistic values, like
+					bytes read/written.
+
+
+What:		/sys/class/pktcdvd/pktcdvd[0-7]/write_queue/size
+What:		/sys/class/pktcdvd/pktcdvd[0-7]/write_queue/congestion_off
+What:		/sys/class/pktcdvd/pktcdvd[0-7]/write_queue/congestion_on
+Date:		Oct. 2006
+KernelVersion:	2.6.20
+Contact:	Thomas Maier <balagi@justmail.de>
+Description:
+		==============	================================================
+		size		(RO) Contains the size of the bio write queue.
+
+		congestion_off	(RW) If bio write queue size is below this mark,
+				accept new bio requests from the block layer.
+
+		congestion_on	(RW) If bio write queue size is higher as this
+				mark, do no longer accept bio write requests
+				from the block layer and wait till the pktcdvd
+				device has processed enough bio's so that bio
+				write queue size is below congestion off mark.
+				A value of <= 0 disables congestion control.
+		==============	================================================
+
+
+Example:
+--------
+To use the pktcdvd sysfs interface directly, you can do::
+
+    # create a new pktcdvd device mapped to /dev/hdc
+    echo "22:0" >/sys/class/pktcdvd/add
+    cat /sys/class/pktcdvd/device_map
+    # assuming device pktcdvd0 was created, look at stat's
+    cat /sys/class/pktcdvd/pktcdvd0/stat/kb_written
+    # print the device id of the mapped block device
+    fgrep pktcdvd0 /sys/class/pktcdvd/device_map
+    # remove device, using pktcdvd0 device id   253:0
+    echo "253:0" >/sys/class/pktcdvd/remove

Documentation/admin-guide/cgroup-v2.rst

@@ -1245,13 +1245,17 @@ PAGE_SIZE multiple when read back.
 	This is a simple interface to trigger memory reclaim in the
 	target cgroup.
 
-	This file accepts a string which contains the number of bytes to
-	reclaim.
+	This file accepts a single key, the number of bytes to reclaim.
+	No nested keys are currently supported.
 
 	Example::
 
 	  echo "1G" > memory.reclaim
 
+	The interface can be later extended with nested keys to
+	configure the reclaim behavior. For example, specify the
+	type of memory to reclaim from (anon, file, ..).
+
 	Please note that the kernel can over or under reclaim from
 	the target cgroup. If less bytes are reclaimed than the
 	specified amount, -EAGAIN is returned.
@@ -1263,13 +1267,6 @@ PAGE_SIZE multiple when read back.
 	This means that the networking layer will not adapt based on
 	reclaim induced by memory.reclaim.
 
-	This file also allows the user to specify the nodes to reclaim from,
-	via the 'nodes=' key, for example::
-
-	  echo "1G nodes=0,1" > memory.reclaim
-
-	The above instructs the kernel to reclaim memory from nodes 0,1.
-
   memory.peak
 	A read-only single value file which exists on non-root
 	cgroups.

Documentation/admin-guide/mm/zswap.rst

@@ -70,9 +70,7 @@ e.g. ``zswap.zpool=zbud``. It can also be changed at runtime using the sysfs
 The zbud type zpool allocates exactly 1 page to store 2 compressed pages, which
 means the compression ratio will always be 2:1 or worse (because of half-full
 zbud pages).  The zsmalloc type zpool has a more complex compressed page
-storage method, and it can achieve greater storage densities.  However,
-zsmalloc does not implement compressed page eviction, so once zswap fills it
-cannot evict the oldest page, it can only reject new pages.
+storage method, and it can achieve greater storage densities.
 
 When a swap page is passed from frontswap to zswap, zswap maintains a mapping
 of the swap entry, a combination of the swap type and swap offset, to the zpool

Documentation/arm64/silicon-errata.rst

@@ -120,6 +120,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2224489        | ARM64_ERRATUM_2224489       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A715     | #2645198        | ARM64_ERRATUM_2645198       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-X2       | #2119858        | ARM64_ERRATUM_2119858       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-X2       | #2224489        | ARM64_ERRATUM_2224489       |

Documentation/conf.py

@@ -31,6 +31,12 @@ def have_command(cmd):
 # Get Sphinx version
 major, minor, patch = sphinx.version_info[:3]
 
+#
+# Warn about older versions that we don't want to support for much
+# longer.
+#
+if (major < 2) or (major == 2 and minor < 4):
+    print('WARNING: support for Sphinx < 2.4 will be removed soon.')
 
 # If extensions (or modules to document with autodoc) are in another directory,
 # add these directories to sys.path here. If the directory is relative to the
@@ -339,7 +345,11 @@ def get_cline_version():
 
 # Custom sidebar templates, maps document names to template names.
 # Note that the RTD theme ignores this
-html_sidebars = { '**': ["about.html", 'searchbox.html', 'localtoc.html', 'sourcelink.html']}
+html_sidebars = { '**': ['searchbox.html', 'localtoc.html', 'sourcelink.html']}
+
+# about.html is available for alabaster theme. Add it at the front.
+if html_theme == 'alabaster':
+    html_sidebars['**'].insert(0, 'about.html')
 
 # Output file base name for HTML help builder.
 htmlhelp_basename = 'TheLinuxKerneldoc'

Documentation/devicetree/bindings/.gitignore

@@ -2,3 +2,8 @@
 *.example.dts
 /processed-schema*.yaml
 /processed-schema*.json
+
+#
+# We don't want to ignore the following even if they are dot-files
+#
+!.yamllint

Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml

@@ -54,6 +54,17 @@ properties:
       - const: xo
       - const: alternate
 
+  interrupts:
+    minItems: 1
+    maxItems: 3
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: dcvsh-irq-0
+      - const: dcvsh-irq-1
+      - const: dcvsh-irq-2
+
   '#freq-domain-cells':
     const: 1
 

Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml

@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Atmel Advanced Encryption Standard (AES) HW cryptographic accelerator
 
 maintainers:
-  - Tudor Ambarus <tudor.ambarus@microchip.com>
+  - Tudor Ambarus <tudor.ambarus@linaro.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml

@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Atmel Secure Hash Algorithm (SHA) HW cryptographic accelerator
 
 maintainers:
-  - Tudor Ambarus <tudor.ambarus@microchip.com>
+  - Tudor Ambarus <tudor.ambarus@linaro.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml

@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Atmel Triple Data Encryption Standard (TDES) HW cryptographic accelerator
 
 maintainers:
-  - Tudor Ambarus <tudor.ambarus@microchip.com>
+  - Tudor Ambarus <tudor.ambarus@linaro.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml

@@ -32,7 +32,7 @@ properties:
       - description: Display byte clock
       - description: Display byte interface clock
       - description: Display pixel clock
-      - description: Display escape clock
+      - description: Display core clock
       - description: Display AHB clock
       - description: Display AXI clock
 
@@ -137,8 +137,6 @@ required:
   - phys
   - assigned-clocks
   - assigned-clock-parents
-  - power-domains
-  - operating-points-v2
   - ports
 
 additionalProperties: false

Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml

@@ -69,7 +69,6 @@ required:
   - compatible
   - reg
   - reg-names
-  - vdds-supply
 
 unevaluatedProperties: false
 

Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml

@@ -39,7 +39,6 @@ required:
   - compatible
   - reg
   - reg-names
-  - vcca-supply
 
 unevaluatedProperties: false
 

Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml

@@ -34,6 +34,10 @@ properties:
   vddio-supply:
     description: Phandle to vdd-io regulator device node.
 
+  qcom,dsi-phy-regulator-ldo-mode:
+    type: boolean
+    description: Indicates if the LDO mode PHY regulator is wanted.
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml

@@ -72,7 +72,7 @@ examples:
     #include <dt-bindings/interconnect/qcom,qcm2290.h>
     #include <dt-bindings/power/qcom-rpmpd.h>
 
-    mdss@5e00000 {
+    display-subsystem@5e00000 {
         #address-cells = <1>;
         #size-cells = <1>;
         compatible = "qcom,qcm2290-mdss";

Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml

@@ -62,7 +62,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/power/qcom-rpmpd.h>
 
-    mdss@5e00000 {
+    display-subsystem@5e00000 {
         #address-cells = <1>;
         #size-cells = <1>;
         compatible = "qcom,sm6115-mdss";