Merge tag 'char-misc-5.9-rc3' of git://git.kernel.org/pub/scm/linux/k…

…ernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc and other driver subsystem fixes for
  5.9-rc3.

  The majority of these are tiny habanalabs driver fixes, but also in
  here are:

   - speakup build fixes now that it is out of staging and got exposed
     to more build systems all of a sudden

   - mei driver fix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  habanalabs: correctly report inbound pci region cfg error
  habanalabs: check correct vmalloc return code
  habanalabs: validate FW file size
  habanalabs: fix incorrect check on failed workqueue create
  habanalabs: set max power according to card type
  habanalabs: proper handling of alloc size in coresight
  habanalabs: set clock gating according to mask
  habanalabs: verify user input in cs_ioctl_signal_wait
  habanalabs: Fix a loop in gaudi_extract_ecc_info()
  habanalabs: Fix memory corruption in debugfs
  habanalabs: validate packet id during CB parse
  habanalabs: Validate user address before mapping
  habanalabs: unmap PCI bars upon iATU failure
  mei: hdcp: fix mei_hdcp_verify_mprime() input parameter
  speakup: only build serialio when ISA is enabled
  speakup: Fix wait_for_xmitr for ttyio case

drivers/accessibility/speakup/Kconfig

@@ -42,6 +42,11 @@ config SPEAKUP
 		one of the listed synthesizers, you should say n.
 
 if SPEAKUP
+
+config SPEAKUP_SERIALIO
+	def_bool y
+	depends on ISA || COMPILE_TEST
+
 config SPEAKUP_SYNTH_ACNTSA
 	tristate "Accent SA synthesizer support"
 	help
@@ -52,7 +57,7 @@ config SPEAKUP_SYNTH_ACNTSA
 
 config SPEAKUP_SYNTH_ACNTPC
 	tristate "Accent PC synthesizer support"
-	depends on ISA || COMPILE_TEST
+	depends on SPEAKUP_SERIALIO
 	help
 		This is the Speakup driver for the accent pc
 		synthesizer.  You can say y to build it into the kernel,
@@ -104,7 +109,7 @@ config SPEAKUP_SYNTH_DECEXT
 
 config SPEAKUP_SYNTH_DECPC
 	depends on m
-	depends on ISA || COMPILE_TEST
+	depends on SPEAKUP_SERIALIO
 	tristate "DECtalk PC (big ISA card) synthesizer support"
 	help
 
@@ -127,7 +132,7 @@ config SPEAKUP_SYNTH_DECPC
 
 config SPEAKUP_SYNTH_DTLK
 	tristate "DoubleTalk PC synthesizer support"
-	depends on ISA || COMPILE_TEST
+	depends on SPEAKUP_SERIALIO
 	help
 
 		This is the Speakup driver for the internal DoubleTalk
@@ -138,7 +143,7 @@ config SPEAKUP_SYNTH_DTLK
 
 config SPEAKUP_SYNTH_KEYPC
 	tristate "Keynote Gold PC synthesizer support"
-	depends on ISA || COMPILE_TEST
+	depends on SPEAKUP_SERIALIO
 	help
 
 		This is the Speakup driver for the Keynote Gold

drivers/accessibility/speakup/Makefile

@@ -25,8 +25,8 @@ speakup-y := \
 	keyhelp.o \
 	kobjects.o \
 	selection.o \
-	serialio.o \
 	spk_ttyio.o \
 	synth.o \
 	thread.o \
 	varhandlers.o
+speakup-$(CONFIG_SPEAKUP_SERIALIO) += serialio.o

drivers/accessibility/speakup/serialio.c

@@ -32,6 +32,7 @@ static void spk_serial_tiocmset(unsigned int set, unsigned int clear);
 static unsigned char spk_serial_in(void);
 static unsigned char spk_serial_in_nowait(void);
 static void spk_serial_flush_buffer(void);
+static int spk_serial_wait_for_xmitr(struct spk_synth *in_synth);
 
 struct spk_io_ops spk_serial_io_ops = {
 	.synth_out = spk_serial_out,
@@ -40,6 +41,7 @@ struct spk_io_ops spk_serial_io_ops = {
 	.synth_in = spk_serial_in,
 	.synth_in_nowait = spk_serial_in_nowait,
 	.flush_buffer = spk_serial_flush_buffer,
+	.wait_for_xmitr = spk_serial_wait_for_xmitr,
 };
 EXPORT_SYMBOL_GPL(spk_serial_io_ops);
 
@@ -211,7 +213,7 @@ void spk_stop_serial_interrupt(void)
 }
 EXPORT_SYMBOL_GPL(spk_stop_serial_interrupt);
 
-int spk_wait_for_xmitr(struct spk_synth *in_synth)
+static int spk_serial_wait_for_xmitr(struct spk_synth *in_synth)
 {
 	int tmout = SPK_XMITR_TIMEOUT;
 
@@ -280,7 +282,7 @@ static void spk_serial_flush_buffer(void)
 
 static int spk_serial_out(struct spk_synth *in_synth, const char ch)
 {
-	if (in_synth->alive && spk_wait_for_xmitr(in_synth)) {
+	if (in_synth->alive && spk_serial_wait_for_xmitr(in_synth)) {
 		outb_p(ch, speakup_info.port_tts);
 		return 1;
 	}
@@ -295,7 +297,7 @@ const char *spk_serial_synth_immediate(struct spk_synth *synth,
 	while ((ch = *buff)) {
 		if (ch == '\n')
 			ch = synth->procspeech;
-		if (spk_wait_for_xmitr(synth))
+		if (spk_serial_wait_for_xmitr(synth))
 			outb(ch, speakup_info.port_tts);
 		else
 			return buff;

drivers/accessibility/speakup/spk_priv.h

@@ -34,7 +34,6 @@
 
 const struct old_serial_port *spk_serial_init(int index);
 void spk_stop_serial_interrupt(void);
-int spk_wait_for_xmitr(struct spk_synth *in_synth);
 void spk_serial_release(void);
 void spk_ttyio_release(void);
 void spk_ttyio_register_ldisc(void);

drivers/accessibility/speakup/spk_ttyio.c

@@ -116,6 +116,7 @@ static void spk_ttyio_tiocmset(unsigned int set, unsigned int clear);
 static unsigned char spk_ttyio_in(void);
 static unsigned char spk_ttyio_in_nowait(void);
 static void spk_ttyio_flush_buffer(void);
+static int spk_ttyio_wait_for_xmitr(struct spk_synth *in_synth);
 
 struct spk_io_ops spk_ttyio_ops = {
 	.synth_out = spk_ttyio_out,
@@ -125,6 +126,7 @@ struct spk_io_ops spk_ttyio_ops = {
 	.synth_in = spk_ttyio_in,
 	.synth_in_nowait = spk_ttyio_in_nowait,
 	.flush_buffer = spk_ttyio_flush_buffer,
+	.wait_for_xmitr = spk_ttyio_wait_for_xmitr,
 };
 EXPORT_SYMBOL_GPL(spk_ttyio_ops);
 
@@ -286,6 +288,11 @@ static void spk_ttyio_tiocmset(unsigned int set, unsigned int clear)
 	mutex_unlock(&speakup_tty_mutex);
 }
 
+static int spk_ttyio_wait_for_xmitr(struct spk_synth *in_synth)
+{
+	return 1;
+}
+
 static unsigned char ttyio_in(int timeout)
 {
 	struct spk_ldisc_data *ldisc_data = speakup_tty->disc_data;

drivers/accessibility/speakup/spk_types.h

@@ -158,6 +158,7 @@ struct spk_io_ops {
 	unsigned char (*synth_in)(void);
 	unsigned char (*synth_in_nowait)(void);
 	void (*flush_buffer)(void);
+	int (*wait_for_xmitr)(struct spk_synth *synth);
 };
 
 struct spk_synth {

drivers/accessibility/speakup/synth.c

@@ -159,7 +159,7 @@ int spk_synth_is_alive_restart(struct spk_synth *synth)
 {
 	if (synth->alive)
 		return 1;
-	if (spk_wait_for_xmitr(synth) > 0) {
+	if (synth->io_ops->wait_for_xmitr(synth) > 0) {
 		/* restart */
 		synth->alive = 1;
 		synth_printf("%s", synth->init);

drivers/misc/habanalabs/common/command_buffer.c

@@ -10,6 +10,7 @@
 
 #include <linux/mm.h>
 #include <linux/slab.h>
+#include <linux/uaccess.h>
 #include <linux/genalloc.h>
 
 static void cb_fini(struct hl_device *hdev, struct hl_cb *cb)
@@ -300,7 +301,7 @@ int hl_cb_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma)
 	struct hl_device *hdev = hpriv->hdev;
 	struct hl_cb *cb;
 	phys_addr_t address;
-	u32 handle;
+	u32 handle, user_cb_size;
 	int rc;
 
 	handle = vma->vm_pgoff;
@@ -314,14 +315,25 @@ int hl_cb_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma)
 	}
 
 	/* Validation check */
-	if ((vma->vm_end - vma->vm_start) != ALIGN(cb->size, PAGE_SIZE)) {
+	user_cb_size = vma->vm_end - vma->vm_start;
+	if (user_cb_size != ALIGN(cb->size, PAGE_SIZE)) {
 		dev_err(hdev->dev,
 			"CB mmap failed, mmap size 0x%lx != 0x%x cb size\n",
 			vma->vm_end - vma->vm_start, cb->size);
 		rc = -EINVAL;
 		goto put_cb;
 	}
 
+	if (!access_ok((void __user *) (uintptr_t) vma->vm_start,
+							user_cb_size)) {
+		dev_err(hdev->dev,
+			"user pointer is invalid - 0x%lx\n",
+			vma->vm_start);
+
+		rc = -EINVAL;
+		goto put_cb;
+	}
+
 	spin_lock(&cb->lock);
 
 	if (cb->mmap) {

drivers/misc/habanalabs/common/command_submission.c

@@ -808,6 +808,14 @@ static int cs_ioctl_signal_wait(struct hl_fpriv *hpriv, enum hl_cs_type cs_type,
 
 	/* currently it is guaranteed to have only one chunk */
 	chunk = &cs_chunk_array[0];
+
+	if (chunk->queue_index >= hdev->asic_prop.max_queues) {
+		dev_err(hdev->dev, "Queue index %d is invalid\n",
+			chunk->queue_index);
+		rc = -EINVAL;
+		goto free_cs_chunk_array;
+	}
+
 	q_idx = chunk->queue_index;
 	hw_queue_prop = &hdev->asic_prop.hw_queues_props[q_idx];
 	q_type = hw_queue_prop->type;

drivers/misc/habanalabs/common/debugfs.c

@@ -19,7 +19,7 @@
 static struct dentry *hl_debug_root;
 
 static int hl_debugfs_i2c_read(struct hl_device *hdev, u8 i2c_bus, u8 i2c_addr,
-				u8 i2c_reg, u32 *val)
+				u8 i2c_reg, long *val)
 {
 	struct armcp_packet pkt;
 	int rc;
@@ -36,7 +36,7 @@ static int hl_debugfs_i2c_read(struct hl_device *hdev, u8 i2c_bus, u8 i2c_addr,
 	pkt.i2c_reg = i2c_reg;
 
 	rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
-						0, (long *) val);
+						0, val);
 
 	if (rc)
 		dev_err(hdev->dev, "Failed to read from I2C, error %d\n", rc);
@@ -827,7 +827,7 @@ static ssize_t hl_i2c_data_read(struct file *f, char __user *buf,
 	struct hl_dbg_device_entry *entry = file_inode(f)->i_private;
 	struct hl_device *hdev = entry->hdev;
 	char tmp_buf[32];
-	u32 val;
+	long val;
 	ssize_t rc;
 
 	if (*ppos)
@@ -842,7 +842,7 @@ static ssize_t hl_i2c_data_read(struct file *f, char __user *buf,
 		return rc;
 	}
 
-	sprintf(tmp_buf, "0x%02x\n", val);
+	sprintf(tmp_buf, "0x%02lx\n", val);
 	rc = simple_read_from_buffer(buf, count, ppos, tmp_buf,
 			strlen(tmp_buf));
 

drivers/misc/habanalabs/common/device.c

@@ -288,7 +288,7 @@ static int device_early_init(struct hl_device *hdev)
 	for (i = 0 ; i < hdev->asic_prop.completion_queues_count ; i++) {
 		snprintf(workq_name, 32, "hl-free-jobs-%u", i);
 		hdev->cq_wq[i] = create_singlethread_workqueue(workq_name);
-		if (hdev->cq_wq == NULL) {
+		if (hdev->cq_wq[i] == NULL) {
 			dev_err(hdev->dev, "Failed to allocate CQ workqueue\n");
 			rc = -ENOMEM;
 			goto free_cq_wq;
@@ -1069,7 +1069,7 @@ int hl_device_reset(struct hl_device *hdev, bool hard_reset,
 			goto out_err;
 		}
 
-		hl_set_max_power(hdev, hdev->max_power);
+		hl_set_max_power(hdev);
 	} else {
 		rc = hdev->asic_funcs->soft_reset_late_init(hdev);
 		if (rc) {
@@ -1318,6 +1318,11 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
 		goto out_disabled;
 	}
 
+	/* Need to call this again because the max power might change,
+	 * depending on card type for certain ASICs
+	 */
+	hl_set_max_power(hdev);
+
 	/*
 	 * hl_hwmon_init() must be called after device_late_init(), because only
 	 * there we get the information from the device about which

drivers/misc/habanalabs/common/firmware_if.c

@@ -13,6 +13,7 @@
 #include <linux/io-64-nonatomic-lo-hi.h>
 #include <linux/slab.h>
 
+#define FW_FILE_MAX_SIZE	0x1400000 /* maximum size of 20MB */
 /**
  * hl_fw_load_fw_to_device() - Load F/W code to device's memory.
  *
@@ -48,6 +49,14 @@ int hl_fw_load_fw_to_device(struct hl_device *hdev, const char *fw_name,
 
 	dev_dbg(hdev->dev, "%s firmware size == %zu\n", fw_name, fw_size);
 
+	if (fw_size > FW_FILE_MAX_SIZE) {
+		dev_err(hdev->dev,
+			"FW file size %zu exceeds maximum of %u bytes\n",
+			fw_size, FW_FILE_MAX_SIZE);
+		rc = -EINVAL;
+		goto out;
+	}
+
 	fw_data = (const u64 *) fw->data;
 
 	memcpy_toio(dst, fw_data, fw_size);

drivers/misc/habanalabs/common/habanalabs.h

@@ -1462,6 +1462,8 @@ struct hl_device_idle_busy_ts {
  *                     details.
  * @in_reset: is device in reset flow.
  * @curr_pll_profile: current PLL profile.
+ * @card_type: Various ASICs have several card types. This indicates the card
+ *             type of the current device.
  * @cs_active_cnt: number of active command submissions on this device (active
  *                 means already in H/W queues)
  * @major: habanalabs kernel driver major.
@@ -1566,6 +1568,7 @@ struct hl_device {
 	u64				clock_gating_mask;
 	atomic_t			in_reset;
 	enum hl_pll_frequency		curr_pll_profile;
+	enum armcp_card_types		card_type;
 	int				cs_active_cnt;
 	u32				major;
 	u32				high_pll;
@@ -1651,7 +1654,7 @@ struct hl_ioctl_desc {
  *
  * Return: true if the area is inside the valid range, false otherwise.
  */
-static inline bool hl_mem_area_inside_range(u64 address, u32 size,
+static inline bool hl_mem_area_inside_range(u64 address, u64 size,
 				u64 range_start_address, u64 range_end_address)
 {
 	u64 end_address = address + size;
@@ -1858,7 +1861,7 @@ int hl_get_pwm_info(struct hl_device *hdev,
 void hl_set_pwm_info(struct hl_device *hdev, int sensor_index, u32 attr,
 			long value);
 u64 hl_get_max_power(struct hl_device *hdev);
-void hl_set_max_power(struct hl_device *hdev, u64 value);
+void hl_set_max_power(struct hl_device *hdev);
 int hl_set_voltage(struct hl_device *hdev,
 			int sensor_index, u32 attr, long value);
 int hl_set_current(struct hl_device *hdev,

drivers/misc/habanalabs/common/memory.c

@@ -66,6 +66,11 @@ static int alloc_device_memory(struct hl_ctx *ctx, struct hl_mem_in *args,
 	num_pgs = (args->alloc.mem_size + (page_size - 1)) >> page_shift;
 	total_size = num_pgs << page_shift;
 
+	if (!total_size) {
+		dev_err(hdev->dev, "Cannot allocate 0 bytes\n");
+		return -EINVAL;
+	}
+
 	contiguous = args->flags & HL_MEM_CONTIGUOUS;
 
 	if (contiguous) {
@@ -93,7 +98,7 @@ static int alloc_device_memory(struct hl_ctx *ctx, struct hl_mem_in *args,
 	phys_pg_pack->contiguous = contiguous;
 
 	phys_pg_pack->pages = kvmalloc_array(num_pgs, sizeof(u64), GFP_KERNEL);
-	if (!phys_pg_pack->pages) {
+	if (ZERO_OR_NULL_PTR(phys_pg_pack->pages)) {
 		rc = -ENOMEM;
 		goto pages_arr_err;
 	}
@@ -683,7 +688,7 @@ static int init_phys_pg_pack_from_userptr(struct hl_ctx *ctx,
 
 	phys_pg_pack->pages = kvmalloc_array(total_npages, sizeof(u64),
 						GFP_KERNEL);
-	if (!phys_pg_pack->pages) {
+	if (ZERO_OR_NULL_PTR(phys_pg_pack->pages)) {
 		rc = -ENOMEM;
 		goto page_pack_arr_mem_err;
 	}

drivers/misc/habanalabs/common/mmu.c

@@ -450,7 +450,7 @@ int hl_mmu_init(struct hl_device *hdev)
 	hdev->mmu_shadow_hop0 = kvmalloc_array(prop->max_asid,
 					prop->mmu_hop_table_size,
 					GFP_KERNEL | __GFP_ZERO);
-	if (!hdev->mmu_shadow_hop0) {
+	if (ZERO_OR_NULL_PTR(hdev->mmu_shadow_hop0)) {
 		rc = -ENOMEM;
 		goto err_pool_add;
 	}