Merge remote-tracking branches 'ras/edac-cxl', 'ras/edac-drivers' and…

… 'ras/edac-misc' into edac-updates

* ras/edac-cxl:
  EDAC/device: Fix dev_set_name() format string
  EDAC: Update memory repair control interface for memory sparing feature
  EDAC: Add a memory repair control feature
  EDAC: Add a Error Check Scrub control feature
  EDAC: Add scrub control feature
  EDAC: Add support for EDAC device features control

* ras/edac-drivers:
  EDAC/ie31200: Switch Raptor Lake-S to interrupt mode
  EDAC/ie31200: Add Intel Raptor Lake-S SoCs support
  EDAC/ie31200: Break up ie31200_probe1()
  EDAC/ie31200: Fold the two channel loops into one loop
  EDAC/ie31200: Make struct dimm_data contain decoded information
  EDAC/ie31200: Make the memory controller resources configurable
  EDAC/ie31200: Simplify the pci_device_id table
  EDAC/ie31200: Fix the 3rd parameter name of *populate_dimm_info()
  EDAC/ie31200: Fix the error path order of ie31200_init()
  EDAC/ie31200: Fix the DIMM size mask for several SoCs
  EDAC/ie31200: Fix the size of EDAC_MC_LAYER_CHIP_SELECT layer
  EDAC/{skx_common,i10nm}: Fix some missing error reports on Emerald Rapids
  EDAC/igen6: Fix the flood of invalid error reports
  EDAC/ie31200: work around false positive build warning

* ras/edac-misc:
  MAINTAINERS: Add a secondary maintainer for bluefield_edac
  EDAC/pnd2: Make read-only const array intlv static
  EDAC/igen6: Constify struct res_config
  EDAC/amd64: Simplify return statement in dct_ecc_enabled()
  EDAC: Use string choice helper functions

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>

MAINTAINERS

@@ -8214,6 +8214,7 @@ F:	drivers/edac/aspeed_edac.c
 
 EDAC-BLUEFIELD
 M:	Shravan Kumar Ramani <shravankr@nvidia.com>
+M:	David Thompson <davthompson@nvidia.com>
 S:	Supported
 F:	drivers/edac/bluefield_edac.c
 

drivers/edac/Kconfig

@@ -196,7 +196,7 @@ config EDAC_I3200
 
 config EDAC_IE31200
 	tristate "Intel e312xx"
-	depends on PCI && X86
+	depends on PCI && X86 && X86_MCE_INTEL
 	help
 	  Support for error detection and correction on the Intel
 	  E3-1200 based DRAM controllers.

drivers/edac/amd64_edac.c

@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 #include <linux/ras.h>
+#include <linux/string_choices.h>
 #include "amd64_edac.h"
 #include <asm/amd_nb.h>
 #include <asm/amd_node.h>
@@ -1171,22 +1172,21 @@ static void debug_dump_dramcfg_low(struct amd64_pvt *pvt, u32 dclr, int chan)
 		edac_dbg(1, " LRDIMM %dx rank multiply\n", (dcsm & 0x3));
 	}
 
-	edac_dbg(1, "All DIMMs support ECC:%s\n",
-		    (dclr & BIT(19)) ? "yes" : "no");
+	edac_dbg(1, "All DIMMs support ECC: %s\n", str_yes_no(dclr & BIT(19)));
 
 
 	edac_dbg(1, "  PAR/ERR parity: %s\n",
-		 (dclr & BIT(8)) ?  "enabled" : "disabled");
+		 str_enabled_disabled(dclr & BIT(8)));
 
 	if (pvt->fam == 0x10)
 		edac_dbg(1, "  DCT 128bit mode width: %s\n",
 			 (dclr & BIT(11)) ?  "128b" : "64b");
 
 	edac_dbg(1, "  x4 logical DIMMs present: L0: %s L1: %s L2: %s L3: %s\n",
-		 (dclr & BIT(12)) ?  "yes" : "no",
-		 (dclr & BIT(13)) ?  "yes" : "no",
-		 (dclr & BIT(14)) ?  "yes" : "no",
-		 (dclr & BIT(15)) ?  "yes" : "no");
+		 str_yes_no(dclr & BIT(12)),
+		 str_yes_no(dclr & BIT(13)),
+		 str_yes_no(dclr & BIT(14)),
+		 str_yes_no(dclr & BIT(15)));
 }
 
 #define CS_EVEN_PRIMARY		BIT(0)
@@ -1353,14 +1353,14 @@ static void umc_dump_misc_regs(struct amd64_pvt *pvt)
 		edac_dbg(1, "UMC%d UMC cap high: 0x%x\n", i, umc->umc_cap_hi);
 
 		edac_dbg(1, "UMC%d ECC capable: %s, ChipKill ECC capable: %s\n",
-				i, (umc->umc_cap_hi & BIT(30)) ? "yes" : "no",
-				    (umc->umc_cap_hi & BIT(31)) ? "yes" : "no");
+				i, str_yes_no(umc->umc_cap_hi & BIT(30)),
+				    str_yes_no(umc->umc_cap_hi & BIT(31)));
 		edac_dbg(1, "UMC%d All DIMMs support ECC: %s\n",
-				i, (umc->umc_cfg & BIT(12)) ? "yes" : "no");
+				i, str_yes_no(umc->umc_cfg & BIT(12)));
 		edac_dbg(1, "UMC%d x4 DIMMs present: %s\n",
-				i, (umc->dimm_cfg & BIT(6)) ? "yes" : "no");
+				i, str_yes_no(umc->dimm_cfg & BIT(6)));
 		edac_dbg(1, "UMC%d x16 DIMMs present: %s\n",
-				i, (umc->dimm_cfg & BIT(7)) ? "yes" : "no");
+				i, str_yes_no(umc->dimm_cfg & BIT(7)));
 
 		umc_debug_display_dimm_sizes(pvt, i);
 	}
@@ -1371,11 +1371,11 @@ static void dct_dump_misc_regs(struct amd64_pvt *pvt)
 	edac_dbg(1, "F3xE8 (NB Cap): 0x%08x\n", pvt->nbcap);
 
 	edac_dbg(1, "  NB two channel DRAM capable: %s\n",
-		 (pvt->nbcap & NBCAP_DCT_DUAL) ? "yes" : "no");
+		 str_yes_no(pvt->nbcap & NBCAP_DCT_DUAL));
 
 	edac_dbg(1, "  ECC capable: %s, ChipKill ECC capable: %s\n",
-		 (pvt->nbcap & NBCAP_SECDED) ? "yes" : "no",
-		 (pvt->nbcap & NBCAP_CHIPKILL) ? "yes" : "no");
+		 str_yes_no(pvt->nbcap & NBCAP_SECDED),
+		 str_yes_no(pvt->nbcap & NBCAP_CHIPKILL));
 
 	debug_dump_dramcfg_low(pvt, pvt->dclr0, 0);
 
@@ -1398,7 +1398,7 @@ static void dct_dump_misc_regs(struct amd64_pvt *pvt)
 	if (!dct_ganging_enabled(pvt))
 		debug_dump_dramcfg_low(pvt, pvt->dclr1, 1);
 
-	edac_dbg(1, "  DramHoleValid: %s\n", dhar_valid(pvt) ? "yes" : "no");
+	edac_dbg(1, "  DramHoleValid: %s\n", str_yes_no(dhar_valid(pvt)));
 
 	amd64_info("using x%u syndromes.\n", pvt->ecc_sym_sz);
 }
@@ -2027,15 +2027,15 @@ static void read_dram_ctl_register(struct amd64_pvt *pvt)
 
 		if (!dct_ganging_enabled(pvt))
 			edac_dbg(0, "  Address range split per DCT: %s\n",
-				 (dct_high_range_enabled(pvt) ? "yes" : "no"));
+				 str_yes_no(dct_high_range_enabled(pvt)));
 
 		edac_dbg(0, "  data interleave for ECC: %s, DRAM cleared since last warm reset: %s\n",
-			 (dct_data_intlv_enabled(pvt) ? "enabled" : "disabled"),
-			 (dct_memory_cleared(pvt) ? "yes" : "no"));
+			 str_enabled_disabled(dct_data_intlv_enabled(pvt)),
+			 str_yes_no(dct_memory_cleared(pvt)));
 
 		edac_dbg(0, "  channel interleave: %s, "
 			 "interleave bits selector: 0x%x\n",
-			 (dct_interleave_enabled(pvt) ? "enabled" : "disabled"),
+			 str_enabled_disabled(dct_interleave_enabled(pvt)),
 			 dct_sel_interleave_addr(pvt));
 	}
 
@@ -3208,8 +3208,7 @@ static bool nb_mce_bank_enabled_on_node(u16 nid)
 		nbe = reg->l & MSR_MCGCTL_NBE;
 
 		edac_dbg(0, "core: %u, MCG_CTL: 0x%llx, NB MSR is %s\n",
-			 cpu, reg->q,
-			 (nbe ? "enabled" : "disabled"));
+			 cpu, reg->q, str_enabled_disabled(nbe));
 
 		if (!nbe)
 			goto out;
@@ -3353,12 +3352,9 @@ static bool dct_ecc_enabled(struct amd64_pvt *pvt)
 		edac_dbg(0, "NB MCE bank disabled, set MSR 0x%08x[4] on node %d to enable.\n",
 			 MSR_IA32_MCG_CTL, nid);
 
-	edac_dbg(3, "Node %d: DRAM ECC %s.\n", nid, (ecc_en ? "enabled" : "disabled"));
+	edac_dbg(3, "Node %d: DRAM ECC %s.\n", nid, str_enabled_disabled(ecc_en));
 
-	if (!ecc_en || !nb_mce_en)
-		return false;
-	else
-		return true;
+	return ecc_en && nb_mce_en;
 }
 
 static bool umc_ecc_enabled(struct amd64_pvt *pvt)
@@ -3378,7 +3374,7 @@ static bool umc_ecc_enabled(struct amd64_pvt *pvt)
 		}
 	}
 
-	edac_dbg(3, "Node %d: DRAM ECC %s.\n", pvt->mc_node_id, (ecc_en ? "enabled" : "disabled"));
+	edac_dbg(3, "Node %d: DRAM ECC %s.\n", pvt->mc_node_id, str_enabled_disabled(ecc_en));
 
 	return ecc_en;
 }

drivers/edac/debugfs.c

@@ -1,4 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/string_choices.h>
+
 #include "edac_module.h"
 
 static struct dentry *edac_debugfs;
@@ -22,7 +25,7 @@ static ssize_t edac_fake_inject_write(struct file *file,
 	       "Generating %d %s fake error%s to %d.%d.%d to test core handling. NOTE: this won't test the driver-specific decoding logic.\n",
 		errcount,
 		(type == HW_EVENT_ERR_UNCORRECTED) ? "UE" : "CE",
-		errcount > 1 ? "s" : "",
+		str_plural(errcount),
 		mci->fake_inject_layer[0],
 		mci->fake_inject_layer[1],
 		mci->fake_inject_layer[2]

drivers/edac/i10nm_base.c

@@ -751,6 +751,8 @@ static int i10nm_get_ddr_munits(void)
 				continue;
 			} else {
 				d->imc[lmc].mdev = mdev;
+				if (res_cfg->type == SPR)
+					skx_set_mc_mapping(d, i, lmc);
 				lmc++;
 			}
 		}

drivers/edac/i5400_edac.c

@@ -31,6 +31,7 @@
 #include <linux/slab.h>
 #include <linux/edac.h>
 #include <linux/mmzone.h>
+#include <linux/string_choices.h>
 
 #include "edac_module.h"
 
@@ -899,7 +900,7 @@ static void decode_mtr(int slot_row, u16 mtr)
 	edac_dbg(2, "\t\tWIDTH: x%d\n", MTR_DRAM_WIDTH(mtr));
 
 	edac_dbg(2, "\t\tELECTRICAL THROTTLING is %s\n",
-		 MTR_DIMMS_ETHROTTLE(mtr) ? "enabled" : "disabled");
+		 str_enabled_disabled(MTR_DIMMS_ETHROTTLE(mtr)));
 
 	edac_dbg(2, "\t\tNUMBANK: %d bank(s)\n", MTR_DRAM_BANKS(mtr));
 	edac_dbg(2, "\t\tNUMRANK: %s\n",

drivers/edac/i7300_edac.c

@@ -23,6 +23,7 @@
 #include <linux/slab.h>
 #include <linux/edac.h>
 #include <linux/mmzone.h>
+#include <linux/string_choices.h>
 
 #include "edac_module.h"
 
@@ -620,7 +621,7 @@ static int decode_mtr(struct i7300_pvt *pvt,
 	edac_dbg(2, "\t\tWIDTH: x%d\n", MTR_DRAM_WIDTH(mtr));
 
 	edac_dbg(2, "\t\tELECTRICAL THROTTLING is %s\n",
-		 MTR_DIMMS_ETHROTTLE(mtr) ? "enabled" : "disabled");
+		 str_enabled_disabled(MTR_DIMMS_ETHROTTLE(mtr)));
 
 	edac_dbg(2, "\t\tNUMBANK: %d bank(s)\n", MTR_DRAM_BANKS(mtr));
 	edac_dbg(2, "\t\tNUMRANK: %s\n",
@@ -871,9 +872,9 @@ static int i7300_get_mc_regs(struct mem_ctl_info *mci)
 			 IS_MIRRORED(pvt->mc_settings) ? "" : "non-");
 
 	edac_dbg(0, "Error detection is %s\n",
-		 IS_ECC_ENABLED(pvt->mc_settings) ? "enabled" : "disabled");
+		 str_enabled_disabled(IS_ECC_ENABLED(pvt->mc_settings)));
 	edac_dbg(0, "Retry is %s\n",
-		 IS_RETRY_ENABLED(pvt->mc_settings) ? "enabled" : "disabled");
+		 str_enabled_disabled(IS_RETRY_ENABLED(pvt->mc_settings)));
 
 	/* Get Memory Interleave Range registers */
 	pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map, MIR0,