Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/ker…

…nel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2018-12-19

Here's the main bluetooth-next pull request for 4.21:

 - Multiple fixes & improvements for Broadcom-based controllers
 - New USB ID for an Intel controller
 - Support for new Broadcom controller variants
 - Use DEFINE_SHOW_ATTRIBUTE to simplify debugfs code
 - Eliminate confusing "last event is not cmd complete" warning message
 - Added vendor suspend/resume support for H:5 (3-Wire UART) controllers
 - Various other smaller improvements & fixes

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/broadcom-bluetooth.txt

@@ -10,6 +10,8 @@ device the slave device is attached to.
 Required properties:
 
  - compatible: should contain one of the following:
+   * "brcm,bcm20702a1"
+   * "brcm,bcm4330-bt"
    * "brcm,bcm43438-bt"
 
 Optional properties:
@@ -18,8 +20,13 @@ Optional properties:
  - shutdown-gpios: GPIO specifier, used to enable the BT module
  - device-wakeup-gpios: GPIO specifier, used to wakeup the controller
  - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor
- - clocks: clock specifier if external clock provided to the controller
- - clock-names: should be "extclk"
+ - clocks: 1 or 2 clocks as defined in clock-names below, in that order
+ - clock-names: names for clock inputs, matching the clocks given
+   - "extclk": deprecated, replaced by "txco"
+   - "txco": external reference clock (not a standalone crystal)
+   - "lpo": external low power 32.768 kHz clock
+ - vbat-supply: phandle to regulator supply for VBAT
+ - vddio-supply: phandle to regulator supply for VDDIO
 
 
 Example:

drivers/bluetooth/btbcm.c

@@ -33,6 +33,8 @@
 #define VERSION "0.1"
 
 #define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}})
+#define BDADDR_BCM20702A1 (&(bdaddr_t) {{0x00, 0x00, 0xa0, 0x02, 0x70, 0x20}})
+#define BDADDR_BCM43430A0 (&(bdaddr_t) {{0xac, 0x1f, 0x12, 0xa0, 0x43, 0x43}})
 #define BDADDR_BCM4324B3 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb3, 0x24, 0x43}})
 #define BDADDR_BCM4330B1 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb1, 0x30, 0x43}})
 
@@ -64,15 +66,23 @@ int btbcm_check_bdaddr(struct hci_dev *hdev)
 	 * The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller
 	 * with no configured address.
 	 *
+	 * The address 20:70:02:A0:00:00 indicates a BCM20702A1 controller
+	 * with no configured address.
+	 *
 	 * The address 43:24:B3:00:00:00 indicates a BCM4324B3 controller
 	 * with waiting for configuration state.
 	 *
 	 * The address 43:30:B1:00:00:00 indicates a BCM4330B1 controller
 	 * with waiting for configuration state.
+	 *
+	 * The address 43:43:A0:12:1F:AC indicates a BCM43430A0 controller
+	 * with no configured address.
 	 */
 	if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0) ||
+	    !bacmp(&bda->bdaddr, BDADDR_BCM20702A1) ||
 	    !bacmp(&bda->bdaddr, BDADDR_BCM4324B3) ||
-	    !bacmp(&bda->bdaddr, BDADDR_BCM4330B1)) {
+	    !bacmp(&bda->bdaddr, BDADDR_BCM4330B1) ||
+	    !bacmp(&bda->bdaddr, BDADDR_BCM43430A0)) {
 		bt_dev_info(hdev, "BCM: Using default device address (%pMR)",
 			    &bda->bdaddr);
 		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
@@ -330,6 +340,8 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = {
 	{ 0x2209, "BCM43430A1"  },	/* 001.002.009 */
 	{ 0x6119, "BCM4345C0"	},	/* 003.001.025 */
 	{ 0x230f, "BCM4356A2"	},	/* 001.003.015 */
+	{ 0x220e, "BCM20702A1"  },	/* 001.002.014 */
+	{ 0x4217, "BCM4329B1"   },	/* 002.002.023 */
 	{ }
 };
 

drivers/bluetooth/btusb.c

@@ -344,6 +344,7 @@ static const struct usb_device_id blacklist_table[] = {
 	/* Intel Bluetooth devices */
 	{ USB_DEVICE(0x8087, 0x0025), .driver_info = BTUSB_INTEL_NEW },
 	{ USB_DEVICE(0x8087, 0x0026), .driver_info = BTUSB_INTEL_NEW },
+	{ USB_DEVICE(0x8087, 0x0029), .driver_info = BTUSB_INTEL_NEW },
 	{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
 	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
 	{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
@@ -1935,10 +1936,8 @@ static void btusb_intel_bootup(struct btusb_data *data, const void *ptr,
 	if (len != sizeof(*evt))
 		return;
 
-	if (test_and_clear_bit(BTUSB_BOOTING, &data->flags)) {
-		smp_mb__after_atomic();
+	if (test_and_clear_bit(BTUSB_BOOTING, &data->flags))
 		wake_up_bit(&data->flags, BTUSB_BOOTING);
-	}
 }
 
 static void btusb_intel_secure_send_result(struct btusb_data *data,
@@ -1953,10 +1952,8 @@ static void btusb_intel_secure_send_result(struct btusb_data *data,
 		set_bit(BTUSB_FIRMWARE_FAILED, &data->flags);
 
 	if (test_and_clear_bit(BTUSB_DOWNLOADING, &data->flags) &&
-	    test_bit(BTUSB_FIRMWARE_LOADED, &data->flags)) {
-		smp_mb__after_atomic();
+	    test_bit(BTUSB_FIRMWARE_LOADED, &data->flags))
 		wake_up_bit(&data->flags, BTUSB_DOWNLOADING);
-	}
 }
 
 static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb)
@@ -2055,6 +2052,35 @@ static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
 	return -EILSEQ;
 }
 
+static bool btusb_setup_intel_new_get_fw_name(struct intel_version *ver,
+					     struct intel_boot_params *params,
+					     char *fw_name, size_t len,
+					     const char *suffix)
+{
+	switch (ver->hw_variant) {
+	case 0x0b:	/* SfP */
+	case 0x0c:	/* WsP */
+		snprintf(fw_name, len, "intel/ibt-%u-%u.%s",
+			le16_to_cpu(ver->hw_variant),
+			le16_to_cpu(params->dev_revid),
+			suffix);
+		break;
+	case 0x11:	/* JfP */
+	case 0x12:	/* ThP */
+	case 0x13:	/* HrP */
+	case 0x14:	/* CcP */
+		snprintf(fw_name, len, "intel/ibt-%u-%u-%u.%s",
+			le16_to_cpu(ver->hw_variant),
+			le16_to_cpu(ver->hw_revision),
+			le16_to_cpu(ver->fw_revision),
+			suffix);
+		break;
+	default:
+		return false;
+	}
+	return true;
+}
+
 static int btusb_setup_intel_new(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
@@ -2106,7 +2132,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	case 0x11:	/* JfP */
 	case 0x12:	/* ThP */
 	case 0x13:	/* HrP */
-	case 0x14:	/* QnJ, IcP */
+	case 0x14:	/* CcP */
 		break;
 	default:
 		bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
@@ -2190,23 +2216,9 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	 * ibt-<hw_variant>-<hw_revision>-<fw_revision>.sfi.
 	 *
 	 */
-	switch (ver.hw_variant) {
-	case 0x0b:	/* SfP */
-	case 0x0c:	/* WsP */
-		snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.sfi",
-			 le16_to_cpu(ver.hw_variant),
-			 le16_to_cpu(params.dev_revid));
-		break;
-	case 0x11:	/* JfP */
-	case 0x12:	/* ThP */
-	case 0x13:	/* HrP */
-	case 0x14:	/* QnJ, IcP */
-		snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u-%u.sfi",
-			 le16_to_cpu(ver.hw_variant),
-			 le16_to_cpu(ver.hw_revision),
-			 le16_to_cpu(ver.fw_revision));
-		break;
-	default:
+	err = btusb_setup_intel_new_get_fw_name(&ver, &params, fwname,
+						sizeof(fwname), "sfi");
+	if (!err) {
 		bt_dev_err(hdev, "Unsupported Intel firmware naming");
 		return -EINVAL;
 	}
@@ -2222,23 +2234,9 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	/* Save the DDC file name for later use to apply once the firmware
 	 * downloading is done.
 	 */
-	switch (ver.hw_variant) {
-	case 0x0b:	/* SfP */
-	case 0x0c:	/* WsP */
-		snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.ddc",
-			 le16_to_cpu(ver.hw_variant),
-			 le16_to_cpu(params.dev_revid));
-		break;
-	case 0x11:	/* JfP */
-	case 0x12:	/* ThP */
-	case 0x13:	/* HrP */
-	case 0x14:	/* QnJ, IcP */
-		snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u-%u.ddc",
-			 le16_to_cpu(ver.hw_variant),
-			 le16_to_cpu(ver.hw_revision),
-			 le16_to_cpu(ver.fw_revision));
-		break;
-	default:
+	err = btusb_setup_intel_new_get_fw_name(&ver, &params, fwname,
+						sizeof(fwname), "ddc");
+	if (!err) {
 		bt_dev_err(hdev, "Unsupported Intel firmware naming");
 		return -EINVAL;
 	}