Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
 "16 patches

  This includes a new rtc driver for the Abracon AB x80x and isn't very
  appropriate for -rc2.  It was still being fiddled with a bit during
  the merge window and I fell asleep during -rc1"

[ So I took the new driver, it seems small and won't regress anything.
  I'm a softy.   - Linus ]

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  rtc: armada38x: fix concurrency access in armada38x_rtc_set_time
  ocfs2: dlm: fix race between purge and get lock resource
  nilfs2: fix sanity check of btree level in nilfs_btree_root_broken()
  util_macros.h: have array pointer point to array of constants
  configfs: init configfs module earlier at boot time
  mm/hwpoison-inject: check PageLRU of hpage
  mm/hwpoison-inject: fix refcounting in no-injection case
  mm: soft-offline: fix num_poisoned_pages counting on concurrent events
  rtc: add rtc-abx80x, a driver for the Abracon AB x80x i2c rtc
  Documentation: bindings: add abracon,abx80x
  kasan: show gcc version requirements in Kconfig and Documentation
  mm/memory-failure: call shake_page() when error hits thp tail page
  lib: delete lib/find_last_bit.c
  MAINTAINERS: add co-maintainer for LED subsystem
  zram: add Designated Reviewer for zram in MAINTAINERS
  revert "zram: move compact_store() to sysfs functions area"

Documentation/devicetree/bindings/rtc/abracon,abx80x.txt

@@ -0,0 +1,30 @@
+Abracon ABX80X I2C ultra low power RTC/Alarm chip
+
+The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
+ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
+is the superset of ab180x.
+
+Required properties:
+
+ - "compatible": should one of:
+        "abracon,abx80x"
+        "abracon,ab0801"
+        "abracon,ab0803"
+        "abracon,ab0804"
+        "abracon,ab0805"
+        "abracon,ab1801"
+        "abracon,ab1803"
+        "abracon,ab1804"
+        "abracon,ab1805"
+	Using "abracon,abx80x" will enable chip autodetection.
+ - "reg": I2C bus address of the device
+
+Optional properties:
+
+The abx804 and abx805 have a trickle charger that is able to charge the
+connected battery or supercap. Both the following properties have to be defined
+and valid to enable charging:
+
+ - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
+ - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
+                          resistor, the other values are in ohm.

Documentation/kasan.txt

@@ -9,7 +9,9 @@ a fast and comprehensive solution for finding use-after-free and out-of-bounds
 bugs.
 
 KASan uses compile-time instrumentation for checking every memory access,
-therefore you will need a certain version of GCC > 4.9.2
+therefore you will need a gcc version of 4.9.2 or later. KASan could detect out
+of bounds accesses to stack or global variables, but only if gcc 5.0 or later was
+used to built the kernel.
 
 Currently KASan is supported only for x86_64 architecture and requires that the
 kernel be built with the SLUB allocator.
@@ -23,8 +25,8 @@ To enable KASAN configure kernel with:
 
 and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline/inline
 is compiler instrumentation types. The former produces smaller binary the
-latter is 1.1 - 2 times faster. Inline instrumentation requires GCC 5.0 or
-latter.
+latter is 1.1 - 2 times faster. Inline instrumentation requires a gcc version
+of 5.0 or later.
 
 Currently KASAN works only with the SLUB memory allocator.
 For better bug detection and nicer report, enable CONFIG_STACKTRACE and put

MAINTAINERS

@@ -5805,6 +5805,7 @@ F:	drivers/scsi/53c700*
 LED SUBSYSTEM
 M:	Bryan Wu <cooloney@gmail.com>
 M:	Richard Purdie <rpurdie@rpsys.net>
+M:	Jacek Anaszewski <j.anaszewski@samsung.com>
 L:	linux-leds@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git
 S:	Maintained
@@ -11037,6 +11038,7 @@ F:	drivers/media/pci/zoran/
 ZRAM COMPRESSED RAM BLOCK DEVICE DRVIER
 M:	Minchan Kim <minchan@kernel.org>
 M:	Nitin Gupta <ngupta@vflare.org>
+R:	Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/block/zram/

drivers/block/zram/zram_drv.c

@@ -74,6 +74,27 @@ static inline struct zram *dev_to_zram(struct device *dev)
 	return (struct zram *)dev_to_disk(dev)->private_data;
 }
 
+static ssize_t compact_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t len)
+{
+	unsigned long nr_migrated;
+	struct zram *zram = dev_to_zram(dev);
+	struct zram_meta *meta;
+
+	down_read(&zram->init_lock);
+	if (!init_done(zram)) {
+		up_read(&zram->init_lock);
+		return -EINVAL;
+	}
+
+	meta = zram->meta;
+	nr_migrated = zs_compact(meta->mem_pool);
+	atomic64_add(nr_migrated, &zram->stats.num_migrated);
+	up_read(&zram->init_lock);
+
+	return len;
+}
+
 static ssize_t disksize_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
@@ -1038,6 +1059,7 @@ static const struct block_device_operations zram_devops = {
 	.owner = THIS_MODULE
 };
 
+static DEVICE_ATTR_WO(compact);
 static DEVICE_ATTR_RW(disksize);
 static DEVICE_ATTR_RO(initstate);
 static DEVICE_ATTR_WO(reset);
@@ -1114,6 +1136,7 @@ static struct attribute *zram_disk_attrs[] = {
 	&dev_attr_num_writes.attr,
 	&dev_attr_failed_reads.attr,
 	&dev_attr_failed_writes.attr,
+	&dev_attr_compact.attr,
 	&dev_attr_invalid_io.attr,
 	&dev_attr_notify_free.attr,
 	&dev_attr_zero_pages.attr,

drivers/rtc/Kconfig

@@ -164,6 +164,16 @@ config RTC_DRV_ABB5ZES3
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-ab-b5ze-s3.
 
+config RTC_DRV_ABX80X
+	tristate "Abracon ABx80x"
+	help
+	  If you say yes here you get support for Abracon AB080X and AB180X
+	  families of ultra-low-power  battery- and capacitor-backed real-time
+	  clock chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-abx80x.
+
 config RTC_DRV_AS3722
 	tristate "ams AS3722 RTC driver"
 	depends on MFD_AS3722

drivers/rtc/Makefile

@@ -25,6 +25,7 @@ obj-$(CONFIG_RTC_DRV_88PM80X)	+= rtc-88pm80x.o
 obj-$(CONFIG_RTC_DRV_AB3100)	+= rtc-ab3100.o
 obj-$(CONFIG_RTC_DRV_AB8500)	+= rtc-ab8500.o
 obj-$(CONFIG_RTC_DRV_ABB5ZES3)	+= rtc-ab-b5ze-s3.o
+obj-$(CONFIG_RTC_DRV_ABX80X)	+= rtc-abx80x.o
 obj-$(CONFIG_RTC_DRV_ARMADA38X)	+= rtc-armada38x.o
 obj-$(CONFIG_RTC_DRV_AS3722)	+= rtc-as3722.o
 obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o