Merge branch 'for-rmk' of git://git.marvell.com/orion into devel-stable

Documentation/ABI/testing/ima_policy

@@ -20,7 +20,7 @@ Description:
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
 
-		base: 	func:= [BPRM_CHECK][FILE_MMAP][INODE_PERMISSION]
+		base: 	func:= [BPRM_CHECK][FILE_MMAP][FILE_CHECK]
 			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
 			fsmagic:= hex value
 			uid:= decimal value
@@ -40,11 +40,11 @@ Description:
 
 			measure func=BPRM_CHECK
 			measure func=FILE_MMAP mask=MAY_EXEC
-			measure func=INODE_PERM mask=MAY_READ uid=0
+			measure func=FILE_CHECK mask=MAY_READ uid=0
 
 		The default policy measures all executables in bprm_check,
 		all files mmapped executable in file_mmap, and all files
-		open for read by root in inode_permission.
+		open for read by root in do_filp_open.
 
 		Examples of LSM specific definitions:
 
@@ -54,8 +54,8 @@ Description:
 
 			dont_measure obj_type=var_log_t
 			dont_measure obj_type=auditd_log_t
-			measure subj_user=system_u func=INODE_PERM mask=MAY_READ
-			measure subj_role=system_r func=INODE_PERM mask=MAY_READ
+			measure subj_user=system_u func=FILE_CHECK mask=MAY_READ
+			measure subj_role=system_r func=FILE_CHECK mask=MAY_READ
 
 		Smack:
-			measure subj_user=_ func=INODE_PERM mask=MAY_READ
+			measure subj_user=_ func=FILE_CHECK mask=MAY_READ

Documentation/cpu-freq/governors.txt

@@ -145,8 +145,8 @@ show_sampling_rate_max: THIS INTERFACE IS DEPRECATED, DON'T USE IT.
 up_threshold: defines what the average CPU usage between the samplings
 of 'sampling_rate' needs to be for the kernel to make a decision on
 whether it should increase the frequency.  For example when it is set
-to its default value of '80' it means that between the checking
-intervals the CPU needs to be on average more than 80% in use to then
+to its default value of '95' it means that between the checking
+intervals the CPU needs to be on average more than 95% in use to then
 decide that the CPU frequency needs to be increased.  
 
 ignore_nice_load: this parameter takes a value of '0' or '1'. When

Documentation/kernel-parameters.txt

@@ -199,6 +199,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			acpi_display_output=video
 			See above.
 
+	acpi_early_pdc_eval	[HW,ACPI] Evaluate processor _PDC methods
+				early. Needed on some platforms to properly
+				initialize the EC.
+
 	acpi_irq_balance [HW,ACPI]
 			ACPI will balance active IRQs
 			default in APIC mode

MAINTAINERS

@@ -616,10 +616,10 @@ M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
 
 ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
-M:	Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+M:	Paulius Zaleckas <paulius.zaleckas@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://gitorious.org/linux-gemini/mainline.git
-S:	Maintained
+S:	Odd Fixes
 F:	arch/arm/mach-gemini/
 
 ARM/EBSA110 MACHINE SUPPORT
@@ -641,9 +641,9 @@ T:	topgit git://git.openezx.org/openezx.git
 F:	arch/arm/mach-pxa/ezx.c
 
 ARM/FARADAY FA526 PORT
-M:	Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+M:	Paulius Zaleckas <paulius.zaleckas@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
+S:	Odd Fixes
 F:	arch/arm/mm/*-fa*
 
 ARM/FOOTBRIDGE ARCHITECTURE
@@ -3411,8 +3411,10 @@ S:	Maintained
 F:	drivers/scsi/sym53c8xx_2/
 
 LTP (Linux Test Project)
-M:	Subrata Modak <subrata@linux.vnet.ibm.com>
-M:	Mike Frysinger <vapier@gentoo.org>
+M:	Rishikesh K Rajak <risrajak@linux.vnet.ibm.com>
+M:	Garrett Cooper <yanegomi@gmail.com>
+M:     Mike Frysinger <vapier@gentoo.org>
+M:     Subrata Modak <subrata@linux.vnet.ibm.com>
 L:	ltp-list@lists.sourceforge.net (subscribers-only)
 W:	http://ltp.sourceforge.net/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
@@ -3836,6 +3838,7 @@ NETWORKING DRIVERS
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git
 S:	Odd Fixes
 F:	drivers/net/
 F:	include/linux/if_*

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 33
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc8
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*

arch/arm/configs/mv78xx0_defconfig

@@ -176,6 +176,7 @@ CONFIG_ARCH_MV78XX0=y
 #
 CONFIG_MACH_DB78X00_BP=y
 CONFIG_MACH_RD78X00_MASA=y
+CONFIG_MACH_TERASTATION_WXL=y
 CONFIG_PLAT_ORION=y
 
 #

arch/arm/include/asm/cacheflush.h

@@ -42,7 +42,8 @@
 #endif
 
 #if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
-    defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020)
+    defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \
+    defined(CONFIG_CPU_ARM1026)
 # define MULTI_CACHE 1
 #endif
 

arch/arm/kernel/setup.c

@@ -102,6 +102,7 @@ struct cpu_cache_fns cpu_cache;
 #endif
 #ifdef CONFIG_OUTER_CACHE
 struct outer_cache_fns outer_cache;
+EXPORT_SYMBOL(outer_cache);
 #endif
 
 struct stack {

arch/arm/mach-gemini/gpio.c

@@ -86,7 +86,7 @@ static int gpio_set_irq_type(unsigned int irq, unsigned int type)
 	unsigned int reg_both, reg_level, reg_type;
 
 	reg_type = __raw_readl(base + GPIO_INT_TYPE);
-	reg_level = __raw_readl(base + GPIO_INT_BOTH_EDGE);
+	reg_level = __raw_readl(base + GPIO_INT_LEVEL);
 	reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE);
 
 	switch (type) {
@@ -117,7 +117,7 @@ static int gpio_set_irq_type(unsigned int irq, unsigned int type)
 	}
 
 	__raw_writel(reg_type, base + GPIO_INT_TYPE);
-	__raw_writel(reg_level, base + GPIO_INT_BOTH_EDGE);
+	__raw_writel(reg_level, base + GPIO_INT_LEVEL);
 	__raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
 
 	gpio_ack_irq(irq);

arch/arm/mach-kirkwood/Kconfig

@@ -32,6 +32,12 @@ config MACH_SHEEVAPLUG
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell SheevaPlug Reference Board.
 
+config MACH_ESATA_SHEEVAPLUG
+	bool "Marvell eSATA SheevaPlug Reference Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell eSATA SheevaPlug Reference Board.
+
 config MACH_TS219
 	bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
 	help

arch/arm/mach-kirkwood/Makefile

@@ -5,6 +5,7 @@ obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
 obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
 obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
+obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_OPENRD)		+= openrd-setup.o

arch/arm/mach-kirkwood/sheevaplug-setup.c

@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/ata_platform.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
@@ -42,10 +43,19 @@ static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
 };
 
+static struct mv_sata_platform_data sheeva_esata_sata_data = {
+	.n_ports	= 2,
+};
+
 static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
 	/* unfortunately the CD signal has not been connected */
 };
 
+static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
+	.gpio_write_protect = 44, /* MPP44 used as SD write protect */
+	.gpio_card_detect = 47,	  /* MPP47 used as SD card detect */
+};
+
 static struct gpio_led sheevaplug_led_pins[] = {
 	{
 		.name			= "plug:green:health",
@@ -74,13 +84,26 @@ static unsigned int sheevaplug_mpp_config[] __initdata = {
 	0
 };
 
+static unsigned int sheeva_esata_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP44_GPIO,	/* SD Write Protect */
+	MPP47_GPIO,	/* SD Card Detect */
+	MPP49_GPIO,	/* LED Green */
+	0
+};
+
 static void __init sheevaplug_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
 	kirkwood_init();
-	kirkwood_mpp_conf(sheevaplug_mpp_config);
+
+	/* setup gpio pin select */
+	if (machine_is_sheeva_esata())
+		kirkwood_mpp_conf(sheeva_esata_mpp_config);
+	else
+		kirkwood_mpp_conf(sheevaplug_mpp_config);
 
 	kirkwood_uart0_init();
 	kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
@@ -91,11 +114,21 @@ static void __init sheevaplug_init(void)
 	kirkwood_ehci_init();
 
 	kirkwood_ge00_init(&sheevaplug_ge00_data);
-	kirkwood_sdio_init(&sheevaplug_mvsdio_data);
+
+	/* honor lower power consumption for plugs with out eSATA */
+	if (machine_is_sheeva_esata())
+		kirkwood_sata_init(&sheeva_esata_sata_data);
+
+	/* enable sd wp and sd cd on plugs with esata */
+	if (machine_is_sheeva_esata())
+		kirkwood_sdio_init(&sheeva_esata_mvsdio_data);
+	else
+		kirkwood_sdio_init(&sheevaplug_mvsdio_data);
 
 	platform_device_register(&sheevaplug_leds);
 }
 
+#ifdef CONFIG_MACH_SHEEVAPLUG
 MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
 	/* Maintainer: shadi Ammouri <shadi@marvell.com> */
 	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
@@ -106,3 +139,16 @@ MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
+MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= sheevaplug_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
+#endif

arch/arm/mach-mv78xx0/Kconfig

@@ -14,6 +14,12 @@ config MACH_RD78X00_MASA
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell RD-78x00-mASA Reference Design.
 
+config MACH_TERASTATION_WXL
+	bool "Buffalo WLX (Terastation Duo) NAS"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Buffalo WXL Nas.
+
 endmenu
 
 endif

arch/arm/mach-mv78xx0/Makefile

@@ -1,3 +1,4 @@
-obj-y				+= common.o addr-map.o irq.o pcie.o
+obj-y				+= common.o addr-map.o mpp.o irq.o pcie.o
 obj-$(CONFIG_MACH_DB78X00_BP)	+= db78x00-bp-setup.o
 obj-$(CONFIG_MACH_RD78X00_MASA)	+= rd78x00-masa-setup.o
+obj-$(CONFIG_MACH_TERASTATION_WXL) += buffalo-wxl-setup.o