mmc: tmio: calculate the native hotplug condition only once

The condition, whether we have to use the native TMIO card hotplug
detection interrupt, is rather complex, it is better to only calculate it
once and store in the private data.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>

drivers/mmc/host/tmio_mmc.h

@@ -86,6 +86,7 @@ struct tmio_mmc_host {
 	spinlock_t		lock;		/* protect host private data */
 	unsigned long		last_req_ts;
 	struct mutex		ios_lock;	/* protect set_ios() context */
+	bool			native_hotplug;
 };
 
 int tmio_mmc_host_probe(struct tmio_mmc_host **host,

drivers/mmc/host/tmio_mmc_pio.c

@@ -916,6 +916,10 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
 	else
 		mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
 
+	_host->native_hotplug = !(pdata->flags & TMIO_MMC_HAS_COLD_CD ||
+				  mmc->caps & MMC_CAP_NEEDS_POLL ||
+				  mmc->caps & MMC_CAP_NONREMOVABLE);
+
 	pdata->power = false;
 	pm_runtime_enable(&pdev->dev);
 	ret = pm_runtime_resume(&pdev->dev);
@@ -934,9 +938,7 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
 	 *  additionally ensure that in case 2) the tmio mmc hardware stays
 	 *  powered on during runtime for the card detection to work.
 	 */
-	if (!(pdata->flags & TMIO_MMC_HAS_COLD_CD
-		|| mmc->caps & MMC_CAP_NEEDS_POLL
-		|| mmc->caps & MMC_CAP_NONREMOVABLE))
+	if (_host->native_hotplug)
 		pm_runtime_get_noresume(&pdev->dev);
 
 	tmio_mmc_clk_stop(_host);
@@ -996,9 +998,7 @@ void tmio_mmc_host_remove(struct tmio_mmc_host *host)
 	 * the controller, the runtime PM is suspended and pdata->power == false,
 	 * so, our .runtime_resume() will not try to detect a card in the slot.
 	 */
-	if (host->pdata->flags & TMIO_MMC_HAS_COLD_CD
-		|| host->mmc->caps & MMC_CAP_NEEDS_POLL
-		|| host->mmc->caps & MMC_CAP_NONREMOVABLE)
+	if (!host->native_hotplug)
 		pm_runtime_get_sync(&pdev->dev);
 
 	dev_pm_qos_hide_latency_limit(&pdev->dev);