Merge branch 'for-rmk' of git://gitorious.org/linux-gemini/mainline

Documentation/kernel-parameters.txt

@@ -199,6 +199,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			acpi_display_output=video
 			See above.
 
+	acpi_early_pdc_eval	[HW,ACPI] Evaluate processor _PDC methods
+				early. Needed on some platforms to properly
+				initialize the EC.
+
 	acpi_irq_balance [HW,ACPI]
 			ACPI will balance active IRQs
 			default in APIC mode

MAINTAINERS

@@ -616,10 +616,10 @@ M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
 
 ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
-M:	Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+M:	Paulius Zaleckas <paulius.zaleckas@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://gitorious.org/linux-gemini/mainline.git
-S:	Maintained
+S:	Odd Fixes
 F:	arch/arm/mach-gemini/
 
 ARM/EBSA110 MACHINE SUPPORT
@@ -641,9 +641,9 @@ T:	topgit git://git.openezx.org/openezx.git
 F:	arch/arm/mach-pxa/ezx.c
 
 ARM/FARADAY FA526 PORT
-M:	Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+M:	Paulius Zaleckas <paulius.zaleckas@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
+S:	Odd Fixes
 F:	arch/arm/mm/*-fa*
 
 ARM/FOOTBRIDGE ARCHITECTURE

arch/arm/mach-gemini/gpio.c

@@ -86,7 +86,7 @@ static int gpio_set_irq_type(unsigned int irq, unsigned int type)
 	unsigned int reg_both, reg_level, reg_type;
 
 	reg_type = __raw_readl(base + GPIO_INT_TYPE);
-	reg_level = __raw_readl(base + GPIO_INT_BOTH_EDGE);
+	reg_level = __raw_readl(base + GPIO_INT_LEVEL);
 	reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE);
 
 	switch (type) {
@@ -117,7 +117,7 @@ static int gpio_set_irq_type(unsigned int irq, unsigned int type)
 	}
 
 	__raw_writel(reg_type, base + GPIO_INT_TYPE);
-	__raw_writel(reg_level, base + GPIO_INT_BOTH_EDGE);
+	__raw_writel(reg_level, base + GPIO_INT_LEVEL);
 	__raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
 
 	gpio_ack_irq(irq);

arch/ia64/include/asm/acpi.h

@@ -94,6 +94,7 @@ ia64_acpi_release_global_lock (unsigned int *lock)
 #define acpi_noirq 0	/* ACPI always enabled on IA64 */
 #define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
 #define acpi_strict 1	/* no ACPI spec workarounds on IA64 */
+#define acpi_ht 0	/* no HT-only mode on IA64 */
 #endif
 #define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
 static inline void disable_acpi(void) { }

arch/powerpc/platforms/85xx/mpc85xx_mds.c

@@ -338,7 +338,8 @@ static void __init mpc85xx_mds_pic_init(void)
 	}
 
 	mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
+			MPIC_BROKEN_FRR_NIRQS,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
 	of_node_put(np);

arch/powerpc/platforms/85xx/smp.c

@@ -46,6 +46,7 @@ smp_85xx_kick_cpu(int nr)
 	__iomem u32 *bptr_vaddr;
 	struct device_node *np;
 	int n = 0;
+	int ioremappable;
 
 	WARN_ON (nr < 0 || nr >= NR_CPUS);
 
@@ -59,21 +60,37 @@ smp_85xx_kick_cpu(int nr)
 		return;
 	}
 
+	/*
+	 * A secondary core could be in a spinloop in the bootpage
+	 * (0xfffff000), somewhere in highmem, or somewhere in lowmem.
+	 * The bootpage and highmem can be accessed via ioremap(), but
+	 * we need to directly access the spinloop if its in lowmem.
+	 */
+	ioremappable = *cpu_rel_addr > virt_to_phys(high_memory);
+
 	/* Map the spin table */
-	bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
+	if (ioremappable)
+		bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
+	else
+		bptr_vaddr = phys_to_virt(*cpu_rel_addr);
 
 	local_irq_save(flags);
 
 	out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr);
 	out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
 
+	if (!ioremappable)
+		flush_dcache_range((ulong)bptr_vaddr,
+				(ulong)(bptr_vaddr + SIZE_BOOT_ENTRY));
+
 	/* Wait a bit for the CPU to ack. */
 	while ((__secondary_hold_acknowledge != nr) && (++n < 1000))
 		mdelay(1);
 
 	local_irq_restore(flags);
 
-	iounmap(bptr_vaddr);
+	if (ioremappable)
+		iounmap(bptr_vaddr);
 
 	pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
 }

arch/x86/kernel/acpi/boot.c

@@ -1342,14 +1342,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 		     DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"),
 		     },
 	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "ASUS P2B-DS",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-		     DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"),
-		     },
-	 },
 	{
 	 .callback = force_acpi_ht,
 	 .ident = "ASUS CUR-DLS",

drivers/acpi/dock.c

@@ -935,6 +935,7 @@ static int dock_add(acpi_handle handle)
 	struct platform_device *dd;
 
 	id = dock_station_count;
+	memset(&ds, 0, sizeof(ds));
 	dd = platform_device_register_data(NULL, "dock", id, &ds, sizeof(ds));
 	if (IS_ERR(dd))
 		return PTR_ERR(dd);

drivers/acpi/processor_idle.c

@@ -110,6 +110,14 @@ static struct dmi_system_id __cpuinitdata processor_power_dmi_table[] = {
 	  DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
 	  DMI_MATCH(DMI_BIOS_VERSION,"SHE845M0.86C.0013.D.0302131307")},
 	 (void *)2},
+	{ set_max_cstate, "Pavilion zv5000", {
+	  DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+	  DMI_MATCH(DMI_PRODUCT_NAME,"Pavilion zv5000 (DS502A#ABA)")},
+	 (void *)1},
+	{ set_max_cstate, "Asus L8400B", {
+	  DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+	  DMI_MATCH(DMI_PRODUCT_NAME,"L8400B series Notebook PC")},
+	 (void *)1},
 	{},
 };
 

drivers/acpi/processor_pdc.c

@@ -125,13 +125,18 @@ acpi_processor_eval_pdc(acpi_handle handle, struct acpi_object_list *pdc_in)
 	return status;
 }
 
+static int early_pdc_done;
+
 void acpi_processor_set_pdc(acpi_handle handle)
 {
 	struct acpi_object_list *obj_list;
 
 	if (arch_has_acpi_pdc() == false)
 		return;
 
+	if (early_pdc_done)
+		return;
+
 	obj_list = acpi_processor_alloc_pdc();
 	if (!obj_list)
 		return;
@@ -151,6 +156,13 @@ static int set_early_pdc_optin(const struct dmi_system_id *id)
 	return 0;
 }
 
+static int param_early_pdc_optin(char *s)
+{
+	early_pdc_optin = 1;
+	return 1;
+}
+__setup("acpi_early_pdc_eval", param_early_pdc_optin);
+
 static struct dmi_system_id __cpuinitdata early_pdc_optin_table[] = {
 	{
 	set_early_pdc_optin, "HP Envy", {
@@ -192,4 +204,6 @@ void __init acpi_early_processor_set_pdc(void)
 	acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
 			    ACPI_UINT32_MAX,
 			    early_init_pdc, NULL, NULL, NULL);
+
+	early_pdc_done = 1;
 }

drivers/acpi/scan.c

@@ -1336,9 +1336,25 @@ static int acpi_bus_scan(acpi_handle handle, struct acpi_bus_ops *ops,
 
 	if (child)
 		*child = device;
-	return 0;
+
+	if (device)
+		return 0;
+	else
+		return -ENODEV;
 }
 
+/*
+ * acpi_bus_add and acpi_bus_start
+ *
+ * scan a given ACPI tree and (probably recently hot-plugged)
+ * create and add or starts found devices.
+ *
+ * If no devices were found -ENODEV is returned which does not
+ * mean that this is a real error, there just have been no suitable
+ * ACPI objects in the table trunk from which the kernel could create
+ * a device and add/start an appropriate driver.
+ */
+
 int
 acpi_bus_add(struct acpi_device **child,
 	     struct acpi_device *parent, acpi_handle handle, int type)
@@ -1348,20 +1364,21 @@ acpi_bus_add(struct acpi_device **child,
 	memset(&ops, 0, sizeof(ops));
 	ops.acpi_op_add = 1;
 
-	acpi_bus_scan(handle, &ops, child);
-	return 0;
+	return acpi_bus_scan(handle, &ops, child);
 }
 EXPORT_SYMBOL(acpi_bus_add);
 
 int acpi_bus_start(struct acpi_device *device)
 {
 	struct acpi_bus_ops ops;
 
+	if (!device)
+		return -EINVAL;
+
 	memset(&ops, 0, sizeof(ops));
 	ops.acpi_op_start = 1;
 
-	acpi_bus_scan(device->handle, &ops, NULL);
-	return 0;
+	return acpi_bus_scan(device->handle, &ops, NULL);
 }
 EXPORT_SYMBOL(acpi_bus_start);
 

drivers/acpi/tables.c

@@ -213,7 +213,7 @@ acpi_table_parse_entries(char *id,
 	unsigned long table_end;
 	acpi_size tbl_size;
 
-	if (acpi_disabled)
+	if (acpi_disabled && !acpi_ht)
 		return -ENODEV;
 
 	if (!handler)
@@ -280,7 +280,7 @@ int __init acpi_table_parse(char *id, acpi_table_handler handler)
 	struct acpi_table_header *table = NULL;
 	acpi_size tbl_size;
 
-	if (acpi_disabled)
+	if (acpi_disabled && !acpi_ht)
 		return -ENODEV;
 
 	if (!handler)

drivers/gpu/drm/drm_edid.c

@@ -598,6 +598,50 @@ struct drm_display_mode *drm_mode_std(struct drm_device *dev,
 	return mode;
 }
 
+/*
+ * EDID is delightfully ambiguous about how interlaced modes are to be
+ * encoded.  Our internal representation is of frame height, but some
+ * HDTV detailed timings are encoded as field height.
+ *
+ * The format list here is from CEA, in frame size.  Technically we
+ * should be checking refresh rate too.  Whatever.
+ */
+static void
+drm_mode_do_interlace_quirk(struct drm_display_mode *mode,
+			    struct detailed_pixel_timing *pt)
+{
+	int i;
+	static const struct {
+		int w, h;
+	} cea_interlaced[] = {
+		{ 1920, 1080 },
+		{  720,  480 },
+		{ 1440,  480 },
+		{ 2880,  480 },
+		{  720,  576 },
+		{ 1440,  576 },
+		{ 2880,  576 },
+	};
+	static const int n_sizes =
+		sizeof(cea_interlaced)/sizeof(cea_interlaced[0]);
+
+	if (!(pt->misc & DRM_EDID_PT_INTERLACED))
+		return;
+
+	for (i = 0; i < n_sizes; i++) {
+		if ((mode->hdisplay == cea_interlaced[i].w) &&
+		    (mode->vdisplay == cea_interlaced[i].h / 2)) {
+			mode->vdisplay *= 2;
+			mode->vsync_start *= 2;
+			mode->vsync_end *= 2;
+			mode->vtotal *= 2;
+			mode->vtotal |= 1;
+		}
+	}
+
+	mode->flags |= DRM_MODE_FLAG_INTERLACE;
+}
+
 /**
  * drm_mode_detailed - create a new mode from an EDID detailed timing section
  * @dev: DRM device (needed to create new mode)
@@ -680,8 +724,7 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
 
 	drm_mode_set_name(mode);
 
-	if (pt->misc & DRM_EDID_PT_INTERLACED)
-		mode->flags |= DRM_MODE_FLAG_INTERLACE;
+	drm_mode_do_interlace_quirk(mode, pt);
 
 	if (quirks & EDID_QUIRK_DETAILED_SYNC_PP) {
 		pt->misc |= DRM_EDID_PT_HSYNC_POSITIVE | DRM_EDID_PT_VSYNC_POSITIVE;

drivers/gpu/drm/i915/intel_lvds.c

@@ -636,6 +636,13 @@ static const struct dmi_system_id bad_lid_status[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "PC-81005"),
 		},
 	},
+	{
+		.ident = "Clevo M5x0N",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "CLEVO Co."),
+			DMI_MATCH(DMI_BOARD_NAME, "M5x0N"),
+		},
+	},
 	{ }
 };
 

drivers/gpu/drm/nouveau/nouveau_bios.c

@@ -5861,13 +5861,12 @@ nouveau_bios_run_init_table(struct drm_device *dev, uint16_t table,
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nvbios *bios = &dev_priv->VBIOS;
 	struct init_exec iexec = { true, false };
-	unsigned long flags;
 
-	spin_lock_irqsave(&bios->lock, flags);
+	mutex_lock(&bios->lock);
 	bios->display.output = dcbent;
 	parse_init_table(bios, table, &iexec);
 	bios->display.output = NULL;
-	spin_unlock_irqrestore(&bios->lock, flags);
+	mutex_unlock(&bios->lock);
 }
 
 static bool NVInitVBIOS(struct drm_device *dev)
@@ -5876,7 +5875,7 @@ static bool NVInitVBIOS(struct drm_device *dev)
 	struct nvbios *bios = &dev_priv->VBIOS;
 
 	memset(bios, 0, sizeof(struct nvbios));
-	spin_lock_init(&bios->lock);
+	mutex_init(&bios->lock);
 	bios->dev = dev;
 
 	if (!NVShadowVBIOS(dev, bios->data))

drivers/gpu/drm/nouveau/nouveau_bios.h

@@ -205,7 +205,7 @@ struct nvbios {
 	struct drm_device *dev;
 	struct nouveau_bios_info pub;
 
-	spinlock_t lock;
+	struct mutex lock;
 
 	uint8_t data[NV_PROM_SIZE];
 	unsigned int length;

drivers/gpu/drm/nouveau/nv17_tv.c

@@ -579,6 +579,8 @@ static void nv17_tv_restore(struct drm_encoder *encoder)
 				nouveau_encoder(encoder)->restore.output);
 
 	nv17_tv_state_load(dev, &to_tv_enc(encoder)->saved_state);
+
+	nouveau_encoder(encoder)->last_dpms = NV_DPMS_CLEARED;
 }
 
 static int nv17_tv_create_resources(struct drm_encoder *encoder,

drivers/gpu/drm/radeon/atom.c

@@ -643,7 +643,7 @@ static void atom_op_delay(atom_exec_context *ctx, int *ptr, int arg)
 	uint8_t count = U8((*ptr)++);
 	SDEBUG("   count: %d\n", count);
 	if (arg == ATOM_UNIT_MICROSEC)
-		schedule_timeout_uninterruptible(usecs_to_jiffies(count));
+		udelay(count);
 	else
 		schedule_timeout_uninterruptible(msecs_to_jiffies(count));
 }