Skip to content

Commit

Permalink
mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver
Browse files Browse the repository at this point in the history
The driver adds the support for the STMicroelectronics FMC2 NAND
Controller found on STM32MP SOCs.

This patch is based on FMC2 command sequencer.
The purpose of the command sequencer is to facilitate the programming
and the reading of NAND flash pages with the ECC and to free the CPU
of sequencing tasks.
It requires one DMA channel for write and two DMA channels for read
operations.

Only NAND_ECC_HW mode is actually supported.
The driver supports a maximum 8k page size.
The following ECC strength and step size are currently supported:
 - nand-ecc-strength = <8>, nand-ecc-step-size = <512> (BCH8)
 - nand-ecc-strength = <4>, nand-ecc-step-size = <512> (BCH4)
 - nand-ecc-strength = <1>, nand-ecc-step-size = <512> (Extended ECC
   based on Hamming)

This patch has been tested on Micron MT29F8G08ABACAH4 and
MT29F8G16ABACAH4

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
  • Loading branch information
Christophe Kerello authored and Miquel Raynal committed Feb 5, 2019
1 parent 8c6e7fd commit 2cd457f
Show file tree
Hide file tree
Showing 3 changed files with 1,818 additions and 0 deletions.
9 changes: 9 additions & 0 deletions drivers/mtd/nand/raw/Kconfig
Original file line number Diff line number Diff line change
Expand Up @@ -541,4 +541,13 @@ config MTD_NAND_TEGRA
is supported. Extra OOB bytes when using HW ECC are currently
not supported.

config MTD_NAND_STM32_FMC2
tristate "Support for NAND controller on STM32MP SoCs"
depends on MACH_STM32MP157 || COMPILE_TEST
help
Enables support for NAND Flash chips on SoCs containing the FMC2
NAND controller. This controller is found on STM32MP SoCs.
The controller supports a maximum 8k page size and supports
a maximum 8-bit correction error per sector of 512 bytes.

endif # MTD_NAND
1 change: 1 addition & 0 deletions drivers/mtd/nand/raw/Makefile
Original file line number Diff line number Diff line change
Expand Up @@ -56,6 +56,7 @@ obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/
obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o
obj-$(CONFIG_MTD_NAND_MTK) += mtk_ecc.o mtk_nand.o
obj-$(CONFIG_MTD_NAND_TEGRA) += tegra_nand.o
obj-$(CONFIG_MTD_NAND_STM32_FMC2) += stm32_fmc2_nand.o

nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
nand-objs += nand_onfi.o
Expand Down
Loading

0 comments on commit 2cd457f

Please sign in to comment.