can: ctucanfd: add support for CTU CAN FD open-source IP core - bus i…

…ndependent part.

This driver adds support for the CTU CAN FD open-source IP core.
More documentation and core sources at project page
(https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core).
The core integration to Xilinx Zynq system as platform driver
is available (https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top).
Implementation on Intel FPGA based PCI Express board is available
from project (https://gitlab.fel.cvut.cz/canbus/pcie-ctucanfd).

More about CAN bus related projects used and developed at CTU FEE at
https://canbus.pages.fel.cvut.cz/ .

Link: https://lore.kernel.org/all/1906e4941560ae2ce4b8d181131fd4963aa31611.1647904780.git.pisa@cmp.felk.cvut.cz
Signed-off-by: Martin Jerabek <martin.jerabek01@gmail.com>
Signed-off-by: Ondrej Ille <ondrej.ille@gmail.com>
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

drivers/net/can/Kconfig

@@ -170,6 +170,7 @@ config PCH_CAN
 
 source "drivers/net/can/c_can/Kconfig"
 source "drivers/net/can/cc770/Kconfig"
+source "drivers/net/can/ctucanfd/Kconfig"
 source "drivers/net/can/ifi_canfd/Kconfig"
 source "drivers/net/can/m_can/Kconfig"
 source "drivers/net/can/mscan/Kconfig"

drivers/net/can/Makefile

@@ -16,6 +16,7 @@ obj-y				+= softing/
 obj-$(CONFIG_CAN_AT91)		+= at91_can.o
 obj-$(CONFIG_CAN_CC770)		+= cc770/
 obj-$(CONFIG_CAN_C_CAN)		+= c_can/
+obj-$(CONFIG_CAN_CTUCANFD)	+= ctucanfd/
 obj-$(CONFIG_CAN_FLEXCAN)	+= flexcan/
 obj-$(CONFIG_CAN_GRCAN)		+= grcan.o
 obj-$(CONFIG_CAN_IFI_CANFD)	+= ifi_canfd/

drivers/net/can/ctucanfd/Kconfig

@@ -0,0 +1,12 @@
+config CAN_CTUCANFD
+	tristate "CTU CAN-FD IP core"
+	help
+	  This driver adds support for the CTU CAN FD open-source IP core.
+	  More documentation and core sources at project page
+	  (https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core).
+	  The core integration to Xilinx Zynq system as platform driver
+	  is available (https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top).
+	  Implementation on Intel FPGA-based PCI Express board is available
+	  from project (https://gitlab.fel.cvut.cz/canbus/pcie-ctucanfd) and
+	  on Intel SoC from project (https://gitlab.fel.cvut.cz/canbus/intel-soc-ctucanfd).
+	  Guidepost CTU FEE CAN bus projects page https://canbus.pages.fel.cvut.cz/ .

drivers/net/can/ctucanfd/Makefile

@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# Makefile for the CTU CAN-FD IP module drivers
+#
+
+obj-$(CONFIG_CAN_CTUCANFD) := ctucanfd.o
+ctucanfd-y := ctucanfd_base.o

drivers/net/can/ctucanfd/ctucanfd.h

@@ -0,0 +1,82 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*******************************************************************************
+ *
+ * CTU CAN FD IP Core
+ *
+ * Copyright (C) 2015-2018 Ondrej Ille <ondrej.ille@gmail.com> FEE CTU
+ * Copyright (C) 2018-2021 Ondrej Ille <ondrej.ille@gmail.com> self-funded
+ * Copyright (C) 2018-2019 Martin Jerabek <martin.jerabek01@gmail.com> FEE CTU
+ * Copyright (C) 2018-2021 Pavel Pisa <pisa@cmp.felk.cvut.cz> FEE CTU/self-funded
+ *
+ * Project advisors:
+ *     Jiri Novak <jnovak@fel.cvut.cz>
+ *     Pavel Pisa <pisa@cmp.felk.cvut.cz>
+ *
+ * Department of Measurement         (http://meas.fel.cvut.cz/)
+ * Faculty of Electrical Engineering (http://www.fel.cvut.cz)
+ * Czech Technical University        (http://www.cvut.cz/)
+ ******************************************************************************/
+
+#ifndef __CTUCANFD__
+#define __CTUCANFD__
+
+#include <linux/netdevice.h>
+#include <linux/can/dev.h>
+#include <linux/list.h>
+
+enum ctu_can_fd_can_registers;
+
+struct ctucan_priv {
+	struct can_priv can; /* must be first member! */
+
+	void __iomem *mem_base;
+	u32 (*read_reg)(struct ctucan_priv *priv,
+			enum ctu_can_fd_can_registers reg);
+	void (*write_reg)(struct ctucan_priv *priv,
+			  enum ctu_can_fd_can_registers reg, u32 val);
+
+	unsigned int txb_head;
+	unsigned int txb_tail;
+	u32 txb_prio;
+	unsigned int ntxbufs;
+	spinlock_t tx_lock; /* spinlock to serialize allocation and processing of TX buffers */
+
+	struct napi_struct napi;
+	struct device *dev;
+	struct clk *can_clk;
+
+	int irq_flags;
+	unsigned long drv_flags;
+
+	u32 rxfrm_first_word;
+
+	struct list_head peers_on_pdev;
+};
+
+/**
+ * ctucan_probe_common - Device type independent registration call
+ *
+ * This function does all the memory allocation and registration for the CAN
+ * device.
+ *
+ * @dev:	Handle to the generic device structure
+ * @addr:	Base address of CTU CAN FD core address
+ * @irq:	Interrupt number
+ * @ntxbufs:	Number of implemented Tx buffers
+ * @can_clk_rate: Clock rate, if 0 then clock are taken from device node
+ * @pm_enable_call: Whether pm_runtime_enable should be called
+ * @set_drvdata_fnc: Function to set network driver data for physical device
+ *
+ * Return: 0 on success and failure value on error
+ */
+int ctucan_probe_common(struct device *dev, void __iomem *addr,
+			int irq, unsigned int ntxbufs,
+			unsigned long can_clk_rate,
+			int pm_enable_call,
+			void (*set_drvdata_fnc)(struct device *dev,
+						struct net_device *ndev));
+
+int ctucan_suspend(struct device *dev) __maybe_unused;
+int ctucan_resume(struct device *dev) __maybe_unused;
+
+#endif /*__CTUCANFD__*/