Merge tag 'qcom-arm64-for-5.6' of https://git.kernel.org/pub/scm/linu…

…x/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 DT updates for v5.6

* Align SDM845 firmware paths with linux-firmware
* Make WiFi work on Dragonboard845c
* Wire up wakeup controller for SDM845
* Critical thermal interrupt support for SDM845, MSM8996 and MSM8998
* Enable UFS for SM8150
* Add remoteproc enablers and nodes for SM8150
* Add CPUfreq for SM8150
* Add RPMH power-domain node for SM8150
* Cleanup and refactor MSM8996 dts structure
* Add initial Inforce Computing IFC6640 dts
* Increase MSM8996 core voltage
* Fix MSM8996 USB phy settings
* Add missing alias for BLSP UART in MSM8998 MTP
* Add remoteproc nodes for ADSP, modem and sensor core for MSM8998
* Enable WiFI for MSM8998
* Introduce the SC7180 platform and the IDP development board
* Add CPUfreq, QUPs, USB, remoteproc etc for SC7180
* Enable USB OTG for Dragonboard 410c
* Add vibrator motor node for PM8916
* Properly specify APCS clocks for MSM8916
* Add CPR and HFPLL for QCS404
* Enable full CPUfreq (with AVS) for QCS404

* tag 'qcom-arm64-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (88 commits)
  arm64: dts: qcom: sdm845: move gpu zap nodes to per-device dts
  arm64: dts: qcom: sm8150: Hard code rpmhpd constants
  arm64: dts: apq8096-db820c: Fix VDD core voltage
  arm64: dts: qcom: qcs404-evb: Set vdd_apc regulator in high power mode
  arm64: dts: qcom: msm8998-mtp: Add alias for blsp1_uart3
  arm64: dts: qcom: sc7180: Add critical interrupt and cooling maps for TSENS in SC7180
  arm64: dts: qcom: msm8996: Fix venus iommu nodename error
  arm64: dts: qcom: sdm845: add the ufs reset
  arm64: dts: qcom: sm8150: Fix UFS phy register size
  arm64: dts: qcom: sm8150-mtp: Add UFS gpio reset
  arm64: dts: qcom: qcs404: Add CPR and populate OPP table
  arm64: dts: qcom: qcs404: Add DVFS support
  arm64: dts: qcom: qcs404: Add the clocks for APCS mux/divider
  arm64: dts: qcom: qcs404: Add HFPLL node
  arm64: dts: qcom: msm8916: Add the clocks for the APCS mux/divider
  arm64: dts: qcom: sc7180: Add rpmh power-domain node
  arm64: dts: pm8004: Add SPMI regulator and add phandles to lsids
  arm64: dts: msm8998: thermal: Add critical interrupt support
  arm64: dts: msm8996: thermal: Add critical interrupt support
  arm64: dts: qcom: db845c: Move remoteproc firmware to sdm845
  ...

Link: https://lore.kernel.org/r/20200113204225.GB3325@yoga
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/qcom.yaml

@@ -24,28 +24,30 @@ description: |
 
   The 'SoC' element must be one of the following strings:
 
-  	apq8016
-  	apq8074
-  	apq8084
-  	apq8096
-  	msm8916
-  	msm8974
-  	msm8992
-  	msm8994
-  	msm8996
-  	mdm9615
-  	ipq8074
-  	sdm845
+        apq8016
+        apq8074
+        apq8084
+        apq8096
+        ipq8074
+        mdm9615
+        msm8916
+        msm8974
+        msm8992
+        msm8994
+        msm8996
+        sc7180
+        sdm845
 
   The 'board' element must be one of the following strings:
 
-  	cdp
-  	liquid
-  	dragonboard
-  	mtp
-  	sbc
-  	hk01
-  	qrd
+        cdp
+        dragonboard
+        hk01
+        idp
+        liquid
+        mtp
+        qrd
+        sbc
 
   The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
   where the minor number may be omitted when it's zero, i.e.  v1.0 is the same
@@ -144,4 +146,8 @@ properties:
               - qcom,ipq8074-hk01
           - const: qcom,ipq8074
 
+      - items:
+          - enum:
+              - qcom,sc7180-idp
+          - const: qcom,sc7180
 ...

arch/arm64/boot/dts/qcom/Makefile

@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
+dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-longcheer-l8150.dtb
@@ -13,6 +14,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-asus-novago-tp370ql.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-hp-envy-x2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-lenovo-miix-630.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r3.dtb

arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi

@@ -5,6 +5,15 @@
 &pm8916_gpios {
 
 	usb_hub_reset_pm: usb_hub_reset_pm {
+		pinconf {
+			pins = "gpio3";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-disable;
+			output-high;
+		};
+	};
+
+	usb_hub_reset_pm_device: usb_hub_reset_pm_device {
 		pinconf {
 			pins = "gpio3";
 			function = PMIC_GPIO_FUNC_NORMAL;
@@ -22,6 +31,16 @@
 		};
 	};
 
+	usb_sw_sel_pm_device: usb_sw_sel_pm_device {
+		pinconf {
+			pins = "gpio4";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			power-source = <PM8916_GPIO_VPH>;
+			input-disable;
+			output-low;
+		};
+	};
+
 	pm8916_gpios_leds: pm8916_gpios_leds {
 		pinconf {
 			pins = "gpio1", "gpio2";

arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi

@@ -358,14 +358,15 @@
 		};
 
 		usb@78d9000 {
-			extcon = <&usb_id>;
+			extcon = <&usb_id>, <&usb_id>;
 			status = "okay";
 			adp-disable;
 			hnp-disable;
 			srp-disable;
-			dr_mode = "host";
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_sw_sel_pm>;
+			dr_mode = "otg";
+			pinctrl-names = "default", "device";
+			pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
+			pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
 			ulpi {
 				phy {
 					v1p8-supply = <&pm8916_l7>;
@@ -504,7 +505,7 @@
 
 	usb_id: usb-id {
 		compatible = "linux,extcon-usb-gpio";
-		vbus-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
+		id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb_id_default>;
 	};