Merge remote-tracking branches 'asoc/topic/of-graph', 'asoc/topic/pxa…

…', 'asoc/topic/qcom' and 'asoc/topic/rk808' into asoc-next

Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt

@@ -44,8 +44,7 @@ Required dai-link subnodes:
 Required CPU/CODEC subnodes properties:
 
 -link-name		: Name of the dai link.
--sound-dai		: phandle and port of CPU/CODEC
--capture-dai		: phandle and port of CPU/CODEC
+-sound-dai		: phandle/s and port of CPU/CODEC
 
 Example:
 
@@ -73,7 +72,7 @@ sound: sound {
 			sound-dai = <&lpass MI2S_PRIMARY>;
 		};
 		codec {
-			sound-dai = <&wcd_codec 0>;
+			sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
 		};
 	};
 

Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt

@@ -0,0 +1,85 @@
+msm8916 analog audio CODEC
+
+Bindings for codec Analog IP which is integrated in pmic pm8916,
+
+## Bindings for codec core on pmic:
+
+Required properties
+ - compatible = "qcom,pm8916-wcd-analog-codec";
+ - reg: represents the slave base address provided to the peripheral.
+ - interrupt-parent : The parent interrupt controller.
+ - interrupts: List of interrupts in given SPMI peripheral.
+ - interrupt-names: Names specified to above list of interrupts in same
+		    order. List of supported interrupt names are:
+  "cdc_spk_cnp_int" - Speaker click and pop interrupt.
+  "cdc_spk_clip_int" - Speaker clip interrupt.
+  "cdc_spk_ocp_int" - Speaker over current protect interrupt.
+  "mbhc_ins_rem_det1" - jack insert removal detect interrupt 1.
+  "mbhc_but_rel_det" - button release interrupt.
+  "mbhc_but_press_det" - button press event
+  "mbhc_ins_rem_det" - jack insert removal detect interrupt.
+  "mbhc_switch_int"	- multi button headset interrupt.
+  "cdc_ear_ocp_int" - Earphone over current protect interrupt.
+  "cdc_hphr_ocp_int" - Headphone R over current protect interrupt.
+  "cdc_hphl_ocp_det" - Headphone L over current protect interrupt.
+  "cdc_ear_cnp_int" - earphone cnp interrupt.
+  "cdc_hphr_cnp_int" - hphr click and pop interrupt.
+  "cdc_hphl_cnp_int" - hphl click and pop interrupt.
+
+ - clocks: Handle to mclk.
+ - clock-names: should be "mclk"
+ - vdd-cdc-io-supply: phandle to VDD_CDC_IO regulator DT node.
+ - vdd-cdc-tx-rx-cx-supply: phandle to VDD_CDC_TX/RX/CX regulator DT node.
+ - vdd-micbias-supply: phandle of VDD_MICBIAS supply's regulator DT node.
+
+Optional Properties:
+- qcom,micbias1-ext-cap: boolean, present if micbias1 has external capacitor
+			 connected.
+- qcom,micbias2-ext-cap: boolean, present if micbias2 has external capacitor
+			 connected.
+
+Example:
+
+spmi_bus {
+	...
+	audio-codec@f000{
+		compatible = "qcom,pm8916-wcd-analog-codec";
+		reg = <0xf000 0x200>;
+		reg-names = "pmic-codec-core";
+		clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
+		clock-names = "mclk";
+		interrupt-parent = <&spmi_bus>;
+		interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
+		interrupt-names = "cdc_spk_cnp_int",
+				  "cdc_spk_clip_int",
+				  "cdc_spk_ocp_int",
+				  "mbhc_ins_rem_det1",
+				  "mbhc_but_rel_det",
+				  "mbhc_but_press_det",
+				  "mbhc_ins_rem_det",
+				  "mbhc_switch_int",
+				  "cdc_ear_ocp_int",
+				  "cdc_hphr_ocp_int",
+				  "cdc_hphl_ocp_det",
+				  "cdc_ear_cnp_int",
+				  "cdc_hphr_cnp_int",
+				  "cdc_hphl_cnp_int";
+	               VDD-CDC-IO-supply = <&pm8916_l5>;
+	               VDD-CDC-TX-RX-CX-supply = <&pm8916_l5>;
+	               VDD-MICBIAS-supply = <&pm8916_l13>;
+	               #sound-dai-cells = <1>;
+	};
+};

Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-digital.txt

@@ -0,0 +1,20 @@
+msm8916 digital audio CODEC
+
+## Bindings for codec core in lpass:
+
+Required properties
+ - compatible = "qcom,msm8916-wcd-digital-codec";
+ - reg: address space for lpass codec.
+ - clocks: Handle to mclk and ahbclk
+ - clock-names: should be "mclk", "ahbix-clk".
+
+Example:
+
+audio-codec@771c000{
+	compatible = "qcom,msm8916-wcd-digital-codec";
+	reg = <0x0771c000 0x400>;
+	clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+		 <&gcc GCC_CODEC_DIGCODEC_CLK>;
+	clock-names = "ahbix-clk", "mclk";
+	#sound-dai-cells = <1>;
+};

drivers/regulator/rk808-regulator.c

@@ -120,7 +120,7 @@ static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = {
 static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
 {
 	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
-	int id = rdev->desc->id - RK808_ID_DCDC1;
+	int id = rdev_get_id(rdev);
 	struct gpio_desc *gpio = pdata->dvs_gpio[id];
 	unsigned int val;
 	int ret;
@@ -193,7 +193,7 @@ static int rk808_buck1_2_set_voltage_sel(struct regulator_dev *rdev,
 					 unsigned sel)
 {
 	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
-	int id = rdev->desc->id - RK808_ID_DCDC1;
+	int id = rdev_get_id(rdev);
 	struct gpio_desc *gpio = pdata->dvs_gpio[id];
 	unsigned int reg = rdev->desc->vsel_reg;
 	unsigned old_sel;
@@ -232,7 +232,7 @@ static int rk808_buck1_2_set_voltage_time_sel(struct regulator_dev *rdev,
 				       unsigned int new_selector)
 {
 	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
-	int id = rdev->desc->id - RK808_ID_DCDC1;
+	int id = rdev_get_id(rdev);
 	struct gpio_desc *gpio = pdata->dvs_gpio[id];
 
 	/* if there is no dvs1/2 pin, we don't need wait extra time here. */
@@ -245,8 +245,7 @@ static int rk808_buck1_2_set_voltage_time_sel(struct regulator_dev *rdev,
 static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
 {
 	unsigned int ramp_value = RK808_RAMP_RATE_10MV_PER_US;
-	unsigned int reg = rk808_buck_config_regs[rdev->desc->id -
-						  RK808_ID_DCDC1];
+	unsigned int reg = rk808_buck_config_regs[rdev_get_id(rdev)];
 
 	switch (ramp_delay) {
 	case 1 ... 2000:

include/sound/soc.h

@@ -1644,25 +1644,43 @@ static inline struct snd_soc_platform *snd_soc_kcontrol_platform(
 int snd_soc_util_init(void);
 void snd_soc_util_exit(void);
 
-int snd_soc_of_parse_card_name(struct snd_soc_card *card,
-			       const char *propname);
-int snd_soc_of_parse_audio_simple_widgets(struct snd_soc_card *card,
-					  const char *propname);
+#define snd_soc_of_parse_card_name(card, propname) \
+	snd_soc_of_parse_card_name_from_node(card, NULL, propname)
+int snd_soc_of_parse_card_name_from_node(struct snd_soc_card *card,
+					 struct device_node *np,
+					 const char *propname);
+#define snd_soc_of_parse_audio_simple_widgets(card, propname)\
+	snd_soc_of_parse_audio_simple_widgets_from_node(card, NULL, propname)
+int snd_soc_of_parse_audio_simple_widgets_from_node(struct snd_soc_card *card,
+						    struct device_node *np,
+						    const char *propname);
+
 int snd_soc_of_parse_tdm_slot(struct device_node *np,
 			      unsigned int *tx_mask,
 			      unsigned int *rx_mask,
 			      unsigned int *slots,
 			      unsigned int *slot_width);
-void snd_soc_of_parse_audio_prefix(struct snd_soc_card *card,
+#define snd_soc_of_parse_audio_prefix(card, codec_conf, of_node, propname) \
+	snd_soc_of_parse_audio_prefix_from_node(card, NULL, codec_conf, \
+						of_node, propname)
+void snd_soc_of_parse_audio_prefix_from_node(struct snd_soc_card *card,
+				   struct device_node *np,
 				   struct snd_soc_codec_conf *codec_conf,
 				   struct device_node *of_node,
 				   const char *propname);
-int snd_soc_of_parse_audio_routing(struct snd_soc_card *card,
-				   const char *propname);
+
+#define snd_soc_of_parse_audio_routing(card, propname) \
+	snd_soc_of_parse_audio_routing_from_node(card, NULL, propname)
+int snd_soc_of_parse_audio_routing_from_node(struct snd_soc_card *card,
+					     struct device_node *np,
+					     const char *propname);
+
 unsigned int snd_soc_of_parse_daifmt(struct device_node *np,
 				     const char *prefix,
 				     struct device_node **bitclkmaster,
 				     struct device_node **framemaster);
+int snd_soc_get_dai_name(struct of_phandle_args *args,
+			 const char **dai_name);
 int snd_soc_of_get_dai_name(struct device_node *of_node,
 			    const char **dai_name);
 int snd_soc_of_get_dai_link_codecs(struct device *dev,

sound/soc/codecs/Kconfig

@@ -592,6 +592,13 @@ config SND_SOC_MAX9860
 	depends on I2C
 	select REGMAP_I2C
 
+config SND_SOC_MSM8916_WCD_ANALOG
+	tristate "Qualcomm MSM8916 WCD Analog Codec"
+	depends on SPMI || COMPILE_TEST
+
+config SND_SOC_MSM8916_WCD_DIGITAL
+	tristate "Qualcomm MSM8916 WCD DIGITAL Codec"
+
 config SND_SOC_PCM1681
 	tristate "Texas Instruments PCM1681 CODEC"
 	depends on I2C

sound/soc/codecs/Makefile

@@ -88,6 +88,8 @@ snd-soc-max9850-objs := max9850.o
 snd-soc-max9860-objs := max9860.o
 snd-soc-mc13783-objs := mc13783.o
 snd-soc-ml26124-objs := ml26124.o
+snd-soc-msm8916-analog-objs := msm8916-wcd-analog.o
+snd-soc-msm8916-digital-objs := msm8916-wcd-digital.o
 snd-soc-nau8810-objs := nau8810.o
 snd-soc-nau8825-objs := nau8825.o
 snd-soc-hdmi-codec-objs := hdmi-codec.o
@@ -216,7 +218,6 @@ snd-soc-wm9705-objs := wm9705.o
 snd-soc-wm9712-objs := wm9712.o
 snd-soc-wm9713-objs := wm9713.o
 snd-soc-wm-hubs-objs := wm_hubs.o
-
 # Amp
 snd-soc-max9877-objs := max9877.o
 snd-soc-max98504-objs := max98504.o
@@ -314,6 +315,8 @@ obj-$(CONFIG_SND_SOC_MAX9850)	+= snd-soc-max9850.o
 obj-$(CONFIG_SND_SOC_MAX9860)	+= snd-soc-max9860.o
 obj-$(CONFIG_SND_SOC_MC13783)	+= snd-soc-mc13783.o
 obj-$(CONFIG_SND_SOC_ML26124)	+= snd-soc-ml26124.o
+obj-$(CONFIG_SND_SOC_MSM8916_WCD_ANALOG) +=snd-soc-msm8916-analog.o
+obj-$(CONFIG_SND_SOC_MSM8916_WCD_DIGITAL) +=snd-soc-msm8916-digital.o
 obj-$(CONFIG_SND_SOC_NAU8810)   += snd-soc-nau8810.o
 obj-$(CONFIG_SND_SOC_NAU8825)   += snd-soc-nau8825.o
 obj-$(CONFIG_SND_SOC_HDMI_CODEC)	+= snd-soc-hdmi-codec.o