net: mtk_eth_soc: move and correct link timer programming

Program the link timer appropriately for the interface mode being
used, using the newly introduced phylink helper that provides the
nanosecond link timer interval.

The intervals are 1.6ms for SGMII based protocols and 10ms for
802.3z based protocols.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/mediatek/mtk_sgmii.c

@@ -36,10 +36,6 @@ static void mtk_pcs_get_state(struct phylink_pcs *pcs,
 /* For SGMII interface mode */
 static void mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
 {
-	/* Setup the link timer and QPHY power up inside SGMIISYS */
-	regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER,
-		     SGMII_LINK_TIMER_DEFAULT);
-
 	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
 			   SGMII_REMOTE_FAULT_DIS, SGMII_REMOTE_FAULT_DIS);
 
@@ -69,8 +65,8 @@ static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
 			  bool permit_pause_to_mac)
 {
 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
+	int advertise, link_timer;
 	unsigned int rgc3;
-	int advertise;
 	bool changed;
 
 	if (interface == PHY_INTERFACE_MODE_2500BASEX)
@@ -83,6 +79,10 @@ static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
 	if (advertise < 0)
 		return advertise;
 
+	link_timer = phylink_get_link_timer_ns(interface);
+	if (link_timer < 0)
+		return link_timer;
+
 	/* Configure the underlying interface speed */
 	regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
 			   RG_PHY_SPEED_3_125G, rgc3);
@@ -91,6 +91,9 @@ static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
 	regmap_update_bits_check(mpcs->regmap, SGMSYS_PCS_ADVERTISE,
 				 SGMII_ADVERTISE, advertise, &changed);
 
+	/* Setup the link timer and QPHY power up inside SGMIISYS */
+	regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER, link_timer / 2 / 8);
+
 	/* Setup SGMIISYS with the determined property */
 	if (interface != PHY_INTERFACE_MODE_SGMII)
 		mtk_pcs_setup_mode_force(mpcs, interface);