net: ethtool: pse-pd: Target the command to the requested PHY

PSE and PD configuration is a PHY-specific command. Instead of targeting
the command towards dev->phydev, use the request to pick the targeted
PHY device.

As we don't get the PHY directly from the netdev's attached phydev, also
adjust the error messages.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/ethtool/pse-pd.c

@@ -28,17 +28,15 @@ struct pse_reply_data {
 /* PSE_GET */
 
 const struct nla_policy ethnl_pse_get_policy[ETHTOOL_A_PSE_HEADER + 1] = {
-	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy),
+	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy_phy),
 };
 
-static int pse_get_pse_attributes(struct net_device *dev,
+static int pse_get_pse_attributes(struct phy_device *phydev,
 				  struct netlink_ext_ack *extack,
 				  struct pse_reply_data *data)
 {
-	struct phy_device *phydev = dev->phydev;
-
 	if (!phydev) {
-		NL_SET_ERR_MSG(extack, "No PHY is attached");
+		NL_SET_ERR_MSG(extack, "No PHY found");
 		return -EOPNOTSUPP;
 	}
 
@@ -58,13 +56,20 @@ static int pse_prepare_data(const struct ethnl_req_info *req_base,
 {
 	struct pse_reply_data *data = PSE_REPDATA(reply_base);
 	struct net_device *dev = reply_base->dev;
+	struct nlattr **tb = info->attrs;
+	struct phy_device *phydev;
 	int ret;
 
 	ret = ethnl_ops_begin(dev);
 	if (ret < 0)
 		return ret;
 
-	ret = pse_get_pse_attributes(dev, info->extack, data);
+	phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_PSE_HEADER],
+				      info->extack);
+	if (IS_ERR(phydev))
+		return -ENODEV;
+
+	ret = pse_get_pse_attributes(phydev, info->extack, data);
 
 	ethnl_ops_complete(dev);
 
@@ -206,7 +211,7 @@ static void pse_cleanup_data(struct ethnl_reply_data *reply_base)
 /* PSE_SET */
 
 const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1] = {
-	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy),
+	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy_phy),
 	[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL] =
 		NLA_POLICY_RANGE(NLA_U32, ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED,
 				 ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED),
@@ -219,12 +224,12 @@ const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1] = {
 static int
 ethnl_set_pse_validate(struct ethnl_req_info *req_info, struct genl_info *info)
 {
-	struct net_device *dev = req_info->dev;
 	struct nlattr **tb = info->attrs;
 	struct phy_device *phydev;
 
-	phydev = dev->phydev;
-	if (!phydev) {
+	phydev = ethnl_req_get_phydev(req_info, tb[ETHTOOL_A_PSE_HEADER],
+				      info->extack);
+	if (IS_ERR_OR_NULL(phydev)) {
 		NL_SET_ERR_MSG(info->extack, "No PHY is attached");
 		return -EOPNOTSUPP;
 	}
@@ -255,12 +260,14 @@ ethnl_set_pse_validate(struct ethnl_req_info *req_info, struct genl_info *info)
 static int
 ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
 {
-	struct net_device *dev = req_info->dev;
 	struct nlattr **tb = info->attrs;
 	struct phy_device *phydev;
 	int ret = 0;
 
-	phydev = dev->phydev;
+	phydev = ethnl_req_get_phydev(req_info, tb[ETHTOOL_A_PSE_HEADER],
+				      info->extack);
+	if (IS_ERR_OR_NULL(phydev))
+		return -ENODEV;
 
 	if (tb[ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT]) {
 		unsigned int pw_limit;