scsi: ufs: Un-inline ufshcd_vops_device_reset function

More and more statements are being added to ufshcd_vops_device_reset() and
this function is being called from multiple locations in the driver.
Un-inline the function to allow the compiler to make better decisions.

Link: https://lore.kernel.org/r/20201208135635.15326-3-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/ufs/ufshcd.c

@@ -581,6 +581,23 @@ static void ufshcd_print_pwr_info(struct ufs_hba *hba)
 		 hba->pwr_info.hs_rate);
 }
 
+static void ufshcd_device_reset(struct ufs_hba *hba)
+{
+	int err;
+
+	err = ufshcd_vops_device_reset(hba);
+
+	if (!err) {
+		ufshcd_set_ufs_dev_active(hba);
+		if (ufshcd_is_wb_allowed(hba)) {
+			hba->wb_enabled = false;
+			hba->wb_buf_flush_enabled = false;
+		}
+	}
+	if (err != -EOPNOTSUPP)
+		ufshcd_update_evt_hist(hba, UFS_EVT_DEV_RESET, err);
+}
+
 void ufshcd_delay_us(unsigned long us, unsigned long tolerance)
 {
 	if (!us)
@@ -3933,7 +3950,7 @@ int ufshcd_link_recovery(struct ufs_hba *hba)
 	spin_unlock_irqrestore(hba->host->host_lock, flags);
 
 	/* Reset the attached device */
-	ufshcd_vops_device_reset(hba);
+	ufshcd_device_reset(hba);
 
 	ret = ufshcd_host_reset_and_restore(hba);
 
@@ -6935,7 +6952,7 @@ static int ufshcd_reset_and_restore(struct ufs_hba *hba)
 
 	do {
 		/* Reset the attached device */
-		ufshcd_vops_device_reset(hba);
+		ufshcd_device_reset(hba);
 
 		err = ufshcd_host_reset_and_restore(hba);
 	} while (err && --retries);
@@ -8708,7 +8725,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	 * further below.
 	 */
 	if (ufshcd_is_ufs_dev_deepsleep(hba)) {
-		ufshcd_vops_device_reset(hba);
+		ufshcd_device_reset(hba);
 		WARN_ON(!ufshcd_is_link_off(hba));
 	}
 	if (ufshcd_is_link_hibern8(hba) && !ufshcd_uic_hibern8_exit(hba))
@@ -8718,7 +8735,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 set_dev_active:
 	/* Can also get here needing to exit DeepSleep */
 	if (ufshcd_is_ufs_dev_deepsleep(hba)) {
-		ufshcd_vops_device_reset(hba);
+		ufshcd_device_reset(hba);
 		ufshcd_host_reset_and_restore(hba);
 	}
 	if (!ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE))
@@ -9317,7 +9334,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 	}
 
 	/* Reset the attached device */
-	ufshcd_vops_device_reset(hba);
+	ufshcd_device_reset(hba);
 
 	ufshcd_init_crypto(hba);
 

drivers/scsi/ufs/ufshcd.h

@@ -1216,21 +1216,12 @@ static inline void ufshcd_vops_dbg_register_dump(struct ufs_hba *hba)
 		hba->vops->dbg_register_dump(hba);
 }
 
-static inline void ufshcd_vops_device_reset(struct ufs_hba *hba)
+static inline int ufshcd_vops_device_reset(struct ufs_hba *hba)
 {
-	if (hba->vops && hba->vops->device_reset) {
-		int err = hba->vops->device_reset(hba);
-
-		if (!err) {
-			ufshcd_set_ufs_dev_active(hba);
-			if (ufshcd_is_wb_allowed(hba)) {
-				hba->wb_enabled = false;
-				hba->wb_buf_flush_enabled = false;
-			}
-		}
-		if (err != -EOPNOTSUPP)
-			ufshcd_update_evt_hist(hba, UFS_EVT_DEV_RESET, err);
-	}
+	if (hba->vops && hba->vops->device_reset)
+		return hba->vops->device_reset(hba);
+
+	return -EOPNOTSUPP;
 }
 
 static inline void ufshcd_vops_config_scaling_param(struct ufs_hba *hba,