Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Simple overlapping changes in bpf land wrt. bpf_helper_defs.h
handling.

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/dev-tools/kunit/start.rst

@@ -24,19 +24,16 @@ The wrapper can be run with:
 For more information on this wrapper (also called kunit_tool) checkout the
 :doc:`kunit-tool` page.
 
-Creating a kunitconfig
-======================
+Creating a .kunitconfig
+=======================
 The Python script is a thin wrapper around Kbuild. As such, it needs to be
-configured with a ``kunitconfig`` file. This file essentially contains the
+configured with a ``.kunitconfig`` file. This file essentially contains the
 regular Kernel config, with the specific test targets as well.
 
 .. code-block:: bash
 
-	git clone -b master https://kunit.googlesource.com/kunitconfig $PATH_TO_KUNITCONFIG_REPO
 	cd $PATH_TO_LINUX_REPO
-	ln -s $PATH_TO_KUNIT_CONFIG_REPO/kunitconfig kunitconfig
-
-You may want to add kunitconfig to your local gitignore.
+	cp arch/um/configs/kunit_defconfig .kunitconfig
 
 Verifying KUnit Works
 ---------------------
@@ -151,7 +148,7 @@ and the following to ``drivers/misc/Makefile``:
 
 	obj-$(CONFIG_MISC_EXAMPLE_TEST) += example-test.o
 
-Now add it to your ``kunitconfig``:
+Now add it to your ``.kunitconfig``:
 
 .. code-block:: none
 

Documentation/networking/dsa/sja1105.rst

@@ -230,12 +230,6 @@ simultaneously on two ports. The driver checks the consistency of the schedules
 against this restriction and errors out when appropriate. Schedule analysis is
 needed to avoid this, which is outside the scope of the document.
 
-At the moment, the time-aware scheduler can only be triggered based on a
-standalone clock and not based on PTP time. This means the base-time argument
-from tc-taprio is ignored and the schedule starts right away. It also means it
-is more difficult to phase-align the scheduler with the other devices in the
-network.
-
 Device Tree bindings and board design
 =====================================
 

MAINTAINERS

@@ -771,6 +771,8 @@ F:	drivers/thermal/thermal_mmio.c
 
 AMAZON ETHERNET DRIVERS
 M:	Netanel Belgazal <netanel@amazon.com>
+M:	Arthur Kiyanovski <akiyano@amazon.com>
+R:	Guy Tzalik <gtzalik@amazon.com>
 R:	Saeed Bishara <saeedb@amazon.com>
 R:	Zorik Machulsky <zorik@amazon.com>
 L:	netdev@vger.kernel.org
@@ -7034,6 +7036,7 @@ L:	linux-acpi@vger.kernel.org
 S:	Maintained
 F:	Documentation/firmware-guide/acpi/gpio-properties.rst
 F:	drivers/gpio/gpiolib-acpi.c
+F:	drivers/gpio/gpiolib-acpi.h
 
 GPIO IR Transmitter
 M:	Sean Young <sean@mess.org>

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 5
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc4
 NAME = Kleptomaniac Octopus
 
 # *DOCUMENTATION*

arch/riscv/kernel/entry.S

@@ -246,6 +246,7 @@ check_syscall_nr:
 	 */
 	li t1, -1
 	beq a7, t1, ret_from_syscall_rejected
+	blt a7, t1, 1f
 	/* Call syscall */
 	la s0, sys_call_table
 	slli t0, a7, RISCV_LGPTR

arch/riscv/kernel/riscv_ksyms.c

@@ -9,8 +9,5 @@
 /*
  * Assembly functions that may be used (directly or indirectly) by modules
  */
-EXPORT_SYMBOL(__clear_user);
-EXPORT_SYMBOL(__asm_copy_to_user);
-EXPORT_SYMBOL(__asm_copy_from_user);
 EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(memcpy);

arch/riscv/lib/uaccess.S

@@ -1,4 +1,5 @@
 #include <linux/linkage.h>
+#include <asm-generic/export.h>
 #include <asm/asm.h>
 #include <asm/csr.h>
 
@@ -66,6 +67,8 @@ ENTRY(__asm_copy_from_user)
 	j 3b
 ENDPROC(__asm_copy_to_user)
 ENDPROC(__asm_copy_from_user)
+EXPORT_SYMBOL(__asm_copy_to_user)
+EXPORT_SYMBOL(__asm_copy_from_user)
 
 
 ENTRY(__clear_user)
@@ -108,6 +111,7 @@ ENTRY(__clear_user)
 	bltu a0, a3, 5b
 	j 3b
 ENDPROC(__clear_user)
+EXPORT_SYMBOL(__clear_user)
 
 	.section .fixup,"ax"
 	.balign 4

arch/riscv/mm/cacheflush.c

@@ -22,6 +22,7 @@ void flush_icache_all(void)
 	else
 		on_each_cpu(ipi_remote_fence_i, NULL, 1);
 }
+EXPORT_SYMBOL(flush_icache_all);
 
 /*
  * Performs an icache flush for the given MM context.  RISC-V has no direct

block/compat_ioctl.c

@@ -6,6 +6,7 @@
 #include <linux/compat.h>
 #include <linux/elevator.h>
 #include <linux/hdreg.h>
+#include <linux/pr.h>
 #include <linux/slab.h>
 #include <linux/syscalls.h>
 #include <linux/types.h>
@@ -354,6 +355,13 @@ long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg)
 	 * but we call blkdev_ioctl, which gets the lock for us
 	 */
 	case BLKRRPART:
+	case BLKREPORTZONE:
+	case BLKRESETZONE:
+	case BLKOPENZONE:
+	case BLKCLOSEZONE:
+	case BLKFINISHZONE:
+	case BLKGETZONESZ:
+	case BLKGETNRZONES:
 		return blkdev_ioctl(bdev, mode, cmd,
 				(unsigned long)compat_ptr(arg));
 	case BLKBSZSET_32:
@@ -401,6 +409,14 @@ long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg)
 	case BLKTRACETEARDOWN: /* compatible */
 		ret = blk_trace_ioctl(bdev, cmd, compat_ptr(arg));
 		return ret;
+	case IOC_PR_REGISTER:
+	case IOC_PR_RESERVE:
+	case IOC_PR_RELEASE:
+	case IOC_PR_PREEMPT:
+	case IOC_PR_PREEMPT_ABORT:
+	case IOC_PR_CLEAR:
+		return blkdev_ioctl(bdev, mode, cmd,
+				(unsigned long)compat_ptr(arg));
 	default:
 		if (disk->fops->compat_ioctl)
 			ret = disk->fops->compat_ioctl(bdev, mode, cmd, arg);

drivers/ata/ahci_brcm.c

@@ -76,8 +76,7 @@ enum brcm_ahci_version {
 };
 
 enum brcm_ahci_quirks {
-	BRCM_AHCI_QUIRK_NO_NCQ		= BIT(0),
-	BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE	= BIT(1),
+	BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE	= BIT(0),
 };
 
 struct brcm_ahci_priv {
@@ -213,29 +212,19 @@ static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv)
 			brcm_sata_phy_disable(priv, i);
 }
 
-static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
+static u32 brcm_ahci_get_portmask(struct ahci_host_priv *hpriv,
 				  struct brcm_ahci_priv *priv)
 {
-	void __iomem *ahci;
-	struct resource *res;
 	u32 impl;
 
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci");
-	ahci = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(ahci))
-		return 0;
-
-	impl = readl(ahci + HOST_PORTS_IMPL);
+	impl = readl(hpriv->mmio + HOST_PORTS_IMPL);
 
 	if (fls(impl) > SATA_TOP_MAX_PHYS)
 		dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n",
 			 impl);
 	else if (!impl)
 		dev_info(priv->dev, "no ports found\n");
 
-	devm_iounmap(&pdev->dev, ahci);
-	devm_release_mem_region(&pdev->dev, res->start, resource_size(res));
-
 	return impl;
 }
 
@@ -285,6 +274,13 @@ static unsigned int brcm_ahci_read_id(struct ata_device *dev,
 	/* Perform the SATA PHY reset sequence */
 	brcm_sata_phy_disable(priv, ap->port_no);
 
+	/* Reset the SATA clock */
+	ahci_platform_disable_clks(hpriv);
+	msleep(10);
+
+	ahci_platform_enable_clks(hpriv);
+	msleep(10);
+
 	/* Bring the PHY back on */
 	brcm_sata_phy_enable(priv, ap->port_no);
 
@@ -347,23 +343,55 @@ static int brcm_ahci_suspend(struct device *dev)
 	struct ata_host *host = dev_get_drvdata(dev);
 	struct ahci_host_priv *hpriv = host->private_data;
 	struct brcm_ahci_priv *priv = hpriv->plat_data;
-	int ret;
 
-	ret = ahci_platform_suspend(dev);
 	brcm_sata_phys_disable(priv);
-	return ret;
+
+	return ahci_platform_suspend(dev);
 }
 
 static int brcm_ahci_resume(struct device *dev)
 {
 	struct ata_host *host = dev_get_drvdata(dev);
 	struct ahci_host_priv *hpriv = host->private_data;
 	struct brcm_ahci_priv *priv = hpriv->plat_data;
+	int ret;
+
+	/* Make sure clocks are turned on before re-configuration */
+	ret = ahci_platform_enable_clks(hpriv);
+	if (ret)
+		return ret;
 
 	brcm_sata_init(priv);
 	brcm_sata_phys_enable(priv);
 	brcm_sata_alpm_init(hpriv);
-	return ahci_platform_resume(dev);
+
+	/* Since we had to enable clocks earlier on, we cannot use
+	 * ahci_platform_resume() as-is since a second call to
+	 * ahci_platform_enable_resources() would bump up the resources
+	 * (regulators, clocks, PHYs) count artificially so we copy the part
+	 * after ahci_platform_enable_resources().
+	 */
+	ret = ahci_platform_enable_phys(hpriv);
+	if (ret)
+		goto out_disable_phys;
+
+	ret = ahci_platform_resume_host(dev);
+	if (ret)
+		goto out_disable_platform_phys;
+
+	/* We resumed so update PM runtime state */
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+
+out_disable_platform_phys:
+	ahci_platform_disable_phys(hpriv);
+out_disable_phys:
+	brcm_sata_phys_disable(priv);
+	ahci_platform_disable_clks(hpriv);
+	return ret;
 }
 #endif
 
@@ -410,44 +438,71 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 	if (!IS_ERR_OR_NULL(priv->rcdev))
 		reset_control_deassert(priv->rcdev);
 
-	if ((priv->version == BRCM_SATA_BCM7425) ||
-		(priv->version == BRCM_SATA_NSP)) {
-		priv->quirks |= BRCM_AHCI_QUIRK_NO_NCQ;
+	hpriv = ahci_platform_get_resources(pdev, 0);
+	if (IS_ERR(hpriv)) {
+		ret = PTR_ERR(hpriv);
+		goto out_reset;
+	}
+
+	hpriv->plat_data = priv;
+	hpriv->flags = AHCI_HFLAG_WAKE_BEFORE_STOP | AHCI_HFLAG_NO_WRITE_TO_RO;
+
+	switch (priv->version) {
+	case BRCM_SATA_BCM7425:
+		hpriv->flags |= AHCI_HFLAG_DELAY_ENGINE;
+		/* fall through */
+	case BRCM_SATA_NSP:
+		hpriv->flags |= AHCI_HFLAG_NO_NCQ;
 		priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
+		break;
+	default:
+		break;
 	}
 
+	ret = ahci_platform_enable_clks(hpriv);
+	if (ret)
+		goto out_reset;
+
+	/* Must be first so as to configure endianness including that
+	 * of the standard AHCI register space.
+	 */
 	brcm_sata_init(priv);
 
-	priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
-	if (!priv->port_mask)
-		return -ENODEV;
+	/* Initializes priv->port_mask which is used below */
+	priv->port_mask = brcm_ahci_get_portmask(hpriv, priv);
+	if (!priv->port_mask) {
+		ret = -ENODEV;
+		goto out_disable_clks;
+	}
 
+	/* Must be done before ahci_platform_enable_phys() */
 	brcm_sata_phys_enable(priv);
 
-	hpriv = ahci_platform_get_resources(pdev, 0);
-	if (IS_ERR(hpriv))
-		return PTR_ERR(hpriv);
-	hpriv->plat_data = priv;
-	hpriv->flags = AHCI_HFLAG_WAKE_BEFORE_STOP;
-
 	brcm_sata_alpm_init(hpriv);
 
-	ret = ahci_platform_enable_resources(hpriv);
+	ret = ahci_platform_enable_phys(hpriv);
 	if (ret)
-		return ret;
-
-	if (priv->quirks & BRCM_AHCI_QUIRK_NO_NCQ)
-		hpriv->flags |= AHCI_HFLAG_NO_NCQ;
-	hpriv->flags |= AHCI_HFLAG_NO_WRITE_TO_RO;
+		goto out_disable_phys;
 
 	ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info,
 				      &ahci_platform_sht);
 	if (ret)
-		return ret;
+		goto out_disable_platform_phys;
 
 	dev_info(dev, "Broadcom AHCI SATA3 registered\n");
 
 	return 0;
+
+out_disable_platform_phys:
+	ahci_platform_disable_phys(hpriv);
+out_disable_phys:
+	brcm_sata_phys_disable(priv);
+out_disable_clks:
+	ahci_platform_disable_clks(hpriv);
+out_reset:
+	if (!IS_ERR_OR_NULL(priv->rcdev))
+		reset_control_assert(priv->rcdev);
+	return ret;
 }
 
 static int brcm_ahci_remove(struct platform_device *pdev)
@@ -457,12 +512,12 @@ static int brcm_ahci_remove(struct platform_device *pdev)
 	struct brcm_ahci_priv *priv = hpriv->plat_data;
 	int ret;
 
+	brcm_sata_phys_disable(priv);
+
 	ret = ata_platform_remove_one(pdev);
 	if (ret)
 		return ret;
 
-	brcm_sata_phys_disable(priv);
-
 	return 0;
 }