tty: serial: msm: Move header file into driver

This header file is only used by the driver, so let's merge the
two together to reduce files and make it easier to see the whole
driver without flipping through two files. This also makes it
easier to use the structures defined in msm_serial.c in the
functions that are defined in msm_serial.h by placing them in the
proper locations.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/msm_serial.c

@@ -40,12 +40,126 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 
-#include "msm_serial.h"
-
-#define UARTDM_BURST_SIZE	16   /* in bytes */
-#define UARTDM_TX_AIGN(x)	((x) & ~0x3) /* valid for > 1p3 */
-#define UARTDM_TX_MAX		256   /* in bytes, valid for <= 1p3 */
-#define UARTDM_RX_SIZE		(UART_XMIT_SIZE / 4)
+#define UART_MR1			0x0000
+
+#define UART_MR1_AUTO_RFR_LEVEL0	0x3F
+#define UART_MR1_AUTO_RFR_LEVEL1	0x3FF00
+#define UART_DM_MR1_AUTO_RFR_LEVEL1	0xFFFFFF00
+#define UART_MR1_RX_RDY_CTL		BIT(7)
+#define UART_MR1_CTS_CTL		BIT(6)
+
+#define UART_MR2			0x0004
+#define UART_MR2_ERROR_MODE		BIT(6)
+#define UART_MR2_BITS_PER_CHAR		0x30
+#define UART_MR2_BITS_PER_CHAR_5	(0x0 << 4)
+#define UART_MR2_BITS_PER_CHAR_6	(0x1 << 4)
+#define UART_MR2_BITS_PER_CHAR_7	(0x2 << 4)
+#define UART_MR2_BITS_PER_CHAR_8	(0x3 << 4)
+#define UART_MR2_STOP_BIT_LEN_ONE	(0x1 << 2)
+#define UART_MR2_STOP_BIT_LEN_TWO	(0x3 << 2)
+#define UART_MR2_PARITY_MODE_NONE	0x0
+#define UART_MR2_PARITY_MODE_ODD	0x1
+#define UART_MR2_PARITY_MODE_EVEN	0x2
+#define UART_MR2_PARITY_MODE_SPACE	0x3
+#define UART_MR2_PARITY_MODE		0x3
+
+#define UART_CSR			0x0008
+
+#define UART_TF				0x000C
+#define UARTDM_TF			0x0070
+
+#define UART_CR				0x0010
+#define UART_CR_CMD_NULL		(0 << 4)
+#define UART_CR_CMD_RESET_RX		(1 << 4)
+#define UART_CR_CMD_RESET_TX		(2 << 4)
+#define UART_CR_CMD_RESET_ERR		(3 << 4)
+#define UART_CR_CMD_RESET_BREAK_INT	(4 << 4)
+#define UART_CR_CMD_START_BREAK		(5 << 4)
+#define UART_CR_CMD_STOP_BREAK		(6 << 4)
+#define UART_CR_CMD_RESET_CTS		(7 << 4)
+#define UART_CR_CMD_RESET_STALE_INT	(8 << 4)
+#define UART_CR_CMD_PACKET_MODE		(9 << 4)
+#define UART_CR_CMD_MODE_RESET		(12 << 4)
+#define UART_CR_CMD_SET_RFR		(13 << 4)
+#define UART_CR_CMD_RESET_RFR		(14 << 4)
+#define UART_CR_CMD_PROTECTION_EN	(16 << 4)
+#define UART_CR_CMD_STALE_EVENT_DISABLE	(6 << 8)
+#define UART_CR_CMD_STALE_EVENT_ENABLE	(80 << 4)
+#define UART_CR_CMD_FORCE_STALE		(4 << 8)
+#define UART_CR_CMD_RESET_TX_READY	(3 << 8)
+#define UART_CR_TX_DISABLE		BIT(3)
+#define UART_CR_TX_ENABLE		BIT(2)
+#define UART_CR_RX_DISABLE		BIT(1)
+#define UART_CR_RX_ENABLE		BIT(0)
+#define UART_CR_CMD_RESET_RXBREAK_START	((1 << 11) | (2 << 4))
+
+#define UART_IMR			0x0014
+#define UART_IMR_TXLEV			BIT(0)
+#define UART_IMR_RXSTALE		BIT(3)
+#define UART_IMR_RXLEV			BIT(4)
+#define UART_IMR_DELTA_CTS		BIT(5)
+#define UART_IMR_CURRENT_CTS		BIT(6)
+#define UART_IMR_RXBREAK_START		BIT(10)
+
+#define UART_IPR_RXSTALE_LAST		0x20
+#define UART_IPR_STALE_LSB		0x1F
+#define UART_IPR_STALE_TIMEOUT_MSB	0x3FF80
+#define UART_DM_IPR_STALE_TIMEOUT_MSB	0xFFFFFF80
+
+#define UART_IPR			0x0018
+#define UART_TFWR			0x001C
+#define UART_RFWR			0x0020
+#define UART_HCR			0x0024
+
+#define UART_MREG			0x0028
+#define UART_NREG			0x002C
+#define UART_DREG			0x0030
+#define UART_MNDREG			0x0034
+#define UART_IRDA			0x0038
+#define UART_MISR_MODE			0x0040
+#define UART_MISR_RESET			0x0044
+#define UART_MISR_EXPORT		0x0048
+#define UART_MISR_VAL			0x004C
+#define UART_TEST_CTRL			0x0050
+
+#define UART_SR				0x0008
+#define UART_SR_HUNT_CHAR		BIT(7)
+#define UART_SR_RX_BREAK		BIT(6)
+#define UART_SR_PAR_FRAME_ERR		BIT(5)
+#define UART_SR_OVERRUN			BIT(4)
+#define UART_SR_TX_EMPTY		BIT(3)
+#define UART_SR_TX_READY		BIT(2)
+#define UART_SR_RX_FULL			BIT(1)
+#define UART_SR_RX_READY		BIT(0)
+
+#define UART_RF				0x000C
+#define UARTDM_RF			0x0070
+#define UART_MISR			0x0010
+#define UART_ISR			0x0014
+#define UART_ISR_TX_READY		BIT(7)
+
+#define UARTDM_RXFS			0x50
+#define UARTDM_RXFS_BUF_SHIFT		0x7
+#define UARTDM_RXFS_BUF_MASK		0x7
+
+#define UARTDM_DMEN			0x3C
+#define UARTDM_DMEN_RX_SC_ENABLE	BIT(5)
+#define UARTDM_DMEN_TX_SC_ENABLE	BIT(4)
+
+#define UARTDM_DMEN_TX_BAM_ENABLE	BIT(2)	/* UARTDM_1P4 */
+#define UARTDM_DMEN_TX_DM_ENABLE	BIT(0)	/* < UARTDM_1P4 */
+
+#define UARTDM_DMEN_RX_BAM_ENABLE	BIT(3)	/* UARTDM_1P4 */
+#define UARTDM_DMEN_RX_DM_ENABLE	BIT(1)	/* < UARTDM_1P4 */
+
+#define UARTDM_DMRX			0x34
+#define UARTDM_NCF_TX			0x40
+#define UARTDM_RX_TOTAL_SNAP		0x38
+
+#define UARTDM_BURST_SIZE		16   /* in bytes */
+#define UARTDM_TX_AIGN(x)		((x) & ~0x3) /* valid for > 1p3 */
+#define UARTDM_TX_MAX			256   /* in bytes, valid for <= 1p3 */
+#define UARTDM_RX_SIZE			(UART_XMIT_SIZE / 4)
 
 enum {
 	UARTDM_1P1 = 1,
@@ -78,6 +192,52 @@ struct msm_port {
 	struct msm_dma		rx_dma;
 };
 
+#define UART_TO_MSM(uart_port)	container_of(uart_port, struct msm_port, uart)
+
+static
+void msm_write(struct uart_port *port, unsigned int val, unsigned int off)
+{
+	writel_relaxed(val, port->membase + off);
+}
+
+static
+unsigned int msm_read(struct uart_port *port, unsigned int off)
+{
+	return readl_relaxed(port->membase + off);
+}
+
+/*
+ * Setup the MND registers to use the TCXO clock.
+ */
+static void msm_serial_set_mnd_regs_tcxo(struct uart_port *port)
+{
+	msm_write(port, 0x06, UART_MREG);
+	msm_write(port, 0xF1, UART_NREG);
+	msm_write(port, 0x0F, UART_DREG);
+	msm_write(port, 0x1A, UART_MNDREG);
+	port->uartclk = 1843200;
+}
+
+/*
+ * Setup the MND registers to use the TCXO clock divided by 4.
+ */
+static void msm_serial_set_mnd_regs_tcxoby4(struct uart_port *port)
+{
+	msm_write(port, 0x18, UART_MREG);
+	msm_write(port, 0xF6, UART_NREG);
+	msm_write(port, 0x0F, UART_DREG);
+	msm_write(port, 0x0A, UART_MNDREG);
+	port->uartclk = 1843200;
+}
+
+static void msm_serial_set_mnd_regs(struct uart_port *port)
+{
+	if (port->uartclk == 19200000)
+		msm_serial_set_mnd_regs_tcxo(port);
+	else if (port->uartclk == 4800000)
+		msm_serial_set_mnd_regs_tcxoby4(port);
+}
+
 static void msm_handle_tx(struct uart_port *port);
 static void msm_start_rx_dma(struct msm_port *msm_port);