Merge branch 'upstream-davem' of master.kernel.org:/pub/scm/linux/ker…

…nel/git/jgarzik/netdev-2.6

Documentation/DocBook/z8530book.tmpl

@@ -69,12 +69,6 @@
 	device to be used as both a tty interface and as a synchronous 
 	controller is a project for Linux post the 2.4 release
   </para>
-  <para>
-	The support code handles most common card configurations and
-	supports running both Cisco HDLC and Synchronous PPP. With extra
-	glue the frame relay and X.25 protocols can also be used with this
-	driver.
-  </para>
   </chapter>
 
   <chapter id="Driver_Modes">
@@ -179,35 +173,27 @@
   <para>
 	If you wish to use the network interface facilities of the driver,
 	then you need to attach a network device to each channel that is
-	present and in use. In addition to use the SyncPPP and Cisco HDLC
+	present and in use. In addition to use the generic HDLC
 	you need to follow some additional plumbing rules. They may seem 
 	complex but a look at the example hostess_sv11 driver should
 	reassure you.
   </para>
   <para>
 	The network device used for each channel should be pointed to by
-	the netdevice field of each channel. The dev-&gt; priv field of the
+	the netdevice field of each channel. The hdlc-&gt; priv field of the
 	network device points to your private data - you will need to be
-	able to find your ppp device from this. In addition to use the
-	sync ppp layer the private data must start with a void * pointer
-	to the syncppp structures.
+	able to find your private data from this.
   </para>
   <para>
 	The way most drivers approach this particular problem is to
 	create a structure holding the Z8530 device definition and
-	put that and the syncppp pointer into the private field of
-	the network device. The network device fields of the channels
-	then point back to the network devices. The ppp_device can also
-	be put in the private structure conveniently.
+	put that into the private field of the network device. The
+	network device fields of the channels then point back to the
+	network devices.
   </para>
   <para>
-	If you wish to use the synchronous ppp then you need to attach
-	the syncppp layer to the network device. You should do this before
-	you register the network device. The
-	<function>sppp_attach</function> requires that the first void *
-	pointer in your private data is pointing to an empty struct
-	ppp_device. The function fills in the initial data for the
-	ppp/hdlc layer.
+	If you wish to use the generic HDLC then you need to register
+	the HDLC device.
   </para>
   <para>
 	Before you register your network device you will also need to
@@ -314,10 +300,10 @@
 	buffer in sk_buff format and queues it for transmission. The
 	caller must provide the entire packet with the exception of the
 	bitstuffing and CRC. This is normally done by the caller via
-	the syncppp interface layer. It returns 0 if the buffer has been 
-        queued and non zero values  for queue full. If the function accepts 
-	the buffer it becomes property of the Z8530 layer and the caller 
-	should not free it. 
+	the generic HDLC interface layer. It returns 0 if the buffer has been
+	queued and non zero values for queue full. If the function accepts
+	the buffer it becomes property of the Z8530 layer and the caller
+	should not free it.
   </para>
   <para>
 	The function <function>z8530_get_stats</function> returns a pointer

arch/sh/include/asm/sh_eth.h

@@ -0,0 +1,11 @@
+#ifndef __ASM_SH_ETH_H__
+#define __ASM_SH_ETH_H__
+
+enum {EDMAC_LITTLE_ENDIAN, EDMAC_BIG_ENDIAN};
+
+struct sh_eth_plat_data {
+	int phy;
+	int edmac_endian;
+};
+
+#endif

drivers/char/pcmcia/synclink_cs.c

@@ -232,7 +232,6 @@ typedef struct _mgslpc_info {
 
 	/* SPPP/Cisco HDLC device parts */
 	int netcount;
-	int dosyncppp;
 	spinlock_t netlock;
 
 #if SYNCLINK_GENERIC_HDLC
@@ -459,13 +458,11 @@ static int ttymajor=0;
 
 static int debug_level = 0;
 static int maxframe[MAX_DEVICE_COUNT] = {0,};
-static int dosyncppp[MAX_DEVICE_COUNT] = {1,1,1,1};
 
 module_param(break_on_load, bool, 0);
 module_param(ttymajor, int, 0);
 module_param(debug_level, int, 0);
 module_param_array(maxframe, int, NULL, 0);
-module_param_array(dosyncppp, int, NULL, 0);
 
 MODULE_LICENSE("GPL");
 
@@ -2915,7 +2912,6 @@ static void mgslpc_add_device(MGSLPC_INFO *info)
 	if (info->line < MAX_DEVICE_COUNT) {
 		if (maxframe[info->line])
 			info->max_frame_size = maxframe[info->line];
-		info->dosyncppp = dosyncppp[info->line];
 	}
 
 	mgslpc_device_count++;

drivers/char/synclink.c

@@ -304,7 +304,6 @@ struct mgsl_struct {
 
 	/* generic HDLC device parts */
 	int netcount;
-	int dosyncppp;
 	spinlock_t netlock;
 
 #if SYNCLINK_GENERIC_HDLC
@@ -868,7 +867,6 @@ static int irq[MAX_ISA_DEVICES];
 static int dma[MAX_ISA_DEVICES];
 static int debug_level;
 static int maxframe[MAX_TOTAL_DEVICES];
-static int dosyncppp[MAX_TOTAL_DEVICES];
 static int txdmabufs[MAX_TOTAL_DEVICES];
 static int txholdbufs[MAX_TOTAL_DEVICES];
 
@@ -879,7 +877,6 @@ module_param_array(irq, int, NULL, 0);
 module_param_array(dma, int, NULL, 0);
 module_param(debug_level, int, 0);
 module_param_array(maxframe, int, NULL, 0);
-module_param_array(dosyncppp, int, NULL, 0);
 module_param_array(txdmabufs, int, NULL, 0);
 module_param_array(txholdbufs, int, NULL, 0);
 
@@ -4258,7 +4255,6 @@ static void mgsl_add_device( struct mgsl_struct *info )
 	if (info->line < MAX_TOTAL_DEVICES) {
 		if (maxframe[info->line])
 			info->max_frame_size = maxframe[info->line];
-		info->dosyncppp = dosyncppp[info->line];
 
 		if (txdmabufs[info->line]) {
 			info->num_tx_dma_buffers = txdmabufs[info->line];

drivers/char/synclink_gt.c

@@ -128,17 +128,14 @@ static int slgt_device_count;
 static int ttymajor;
 static int debug_level;
 static int maxframe[MAX_DEVICES];
-static int dosyncppp[MAX_DEVICES];
 
 module_param(ttymajor, int, 0);
 module_param(debug_level, int, 0);
 module_param_array(maxframe, int, NULL, 0);
-module_param_array(dosyncppp, int, NULL, 0);
 
 MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned");
 MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail");
 MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)");
-MODULE_PARM_DESC(dosyncppp, "Enable synchronous net device, 0=disable 1=enable");
 
 /*
  * tty support and callbacks
@@ -349,7 +346,6 @@ struct slgt_info {
 	/* SPPP/Cisco HDLC device parts */
 
 	int netcount;
-	int dosyncppp;
 	spinlock_t netlock;
 #if SYNCLINK_GENERIC_HDLC
 	struct net_device *netdev;
@@ -3405,7 +3401,6 @@ static void add_device(struct slgt_info *info)
 	if (info->line < MAX_DEVICES) {
 		if (maxframe[info->line])
 			info->max_frame_size = maxframe[info->line];
-		info->dosyncppp = dosyncppp[info->line];
 	}
 
 	slgt_device_count++;

drivers/char/synclinkmp.c

@@ -270,7 +270,6 @@ typedef struct _synclinkmp_info {
 
 	/* SPPP/Cisco HDLC device parts */
 	int netcount;
-	int dosyncppp;
 	spinlock_t netlock;
 
 #if SYNCLINK_GENERIC_HDLC
@@ -469,13 +468,11 @@ static int ttymajor = 0;
  */
 static int debug_level = 0;
 static int maxframe[MAX_DEVICES] = {0,};
-static int dosyncppp[MAX_DEVICES] = {0,};
 
 module_param(break_on_load, bool, 0);
 module_param(ttymajor, int, 0);
 module_param(debug_level, int, 0);
 module_param_array(maxframe, int, NULL, 0);
-module_param_array(dosyncppp, int, NULL, 0);
 
 static char *driver_name = "SyncLink MultiPort driver";
 static char *driver_version = "$Revision: 4.38 $";
@@ -3752,7 +3749,6 @@ static void add_device(SLMP_INFO *info)
 	if (info->line < MAX_DEVICES) {
 		if (maxframe[info->line])
 			info->max_frame_size = maxframe[info->line];
-		info->dosyncppp = dosyncppp[info->line];
 	}
 
 	synclinkmp_device_count++;

drivers/net/3c523.c

@@ -640,10 +640,8 @@ static int init586(struct net_device *dev)
 	cfg_cmd->time_low = 0x00;
 	cfg_cmd->time_high = 0xf2;
 	cfg_cmd->promisc = 0;
-	if (dev->flags & (IFF_ALLMULTI | IFF_PROMISC)) {
+	if (dev->flags & (IFF_ALLMULTI | IFF_PROMISC))
 		cfg_cmd->promisc = 1;
-		dev->flags |= IFF_PROMISC;
-	}
 	cfg_cmd->carr_coll = 0x00;
 
 	p->scb->cbl_offset = make16(cfg_cmd);

drivers/net/3c527.c

@@ -1521,14 +1521,11 @@ static void do_mc32_set_multicast_list(struct net_device *dev, int retry)
 	struct mc32_local *lp = netdev_priv(dev);
 	u16 filt = (1<<2); /* Save Bad Packets, for stats purposes */
 
-	if (dev->flags&IFF_PROMISC)
+	if ((dev->flags&IFF_PROMISC) ||
+	    (dev->flags&IFF_ALLMULTI) ||
+	    dev->mc_count > 10)
 		/* Enable promiscuous mode */
 		filt |= 1;
-	else if((dev->flags&IFF_ALLMULTI) || dev->mc_count > 10)
-	{
-		dev->flags|=IFF_PROMISC;
-		filt |= 1;
-	}
 	else if(dev->mc_count)
 	{
 		unsigned char block[62];

drivers/net/3c59x.c

@@ -1692,12 +1692,14 @@ vortex_open(struct net_device *dev)
 			vp->rx_ring[i].next = cpu_to_le32(vp->rx_ring_dma + sizeof(struct boom_rx_desc) * (i+1));
 			vp->rx_ring[i].status = 0;	/* Clear complete bit. */
 			vp->rx_ring[i].length = cpu_to_le32(PKT_BUF_SZ | LAST_FRAG);
-			skb = dev_alloc_skb(PKT_BUF_SZ);
+
+			skb = __netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN,
+						 GFP_KERNEL);
 			vp->rx_skbuff[i] = skb;
 			if (skb == NULL)
 				break;			/* Bad news!  */
-			skb->dev = dev;			/* Mark as being used by this device. */
-			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
+
+			skb_reserve(skb, NET_IP_ALIGN);	/* Align IP on 16 byte boundaries */
 			vp->rx_ring[i].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE));
 		}
 		if (i != RX_RING_SIZE) {
@@ -2538,7 +2540,7 @@ boomerang_rx(struct net_device *dev)
 		struct sk_buff *skb;
 		entry = vp->dirty_rx % RX_RING_SIZE;
 		if (vp->rx_skbuff[entry] == NULL) {
-			skb = dev_alloc_skb(PKT_BUF_SZ);
+			skb = netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN);
 			if (skb == NULL) {
 				static unsigned long last_jif;
 				if (time_after(jiffies, last_jif + 10 * HZ)) {
@@ -2549,8 +2551,8 @@ boomerang_rx(struct net_device *dev)
 					mod_timer(&vp->rx_oom_timer, RUN_AT(HZ * 1));
 				break;			/* Bad news!  */
 			}
-			skb->dev = dev;			/* Mark as being used by this device. */
-			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
+
+			skb_reserve(skb, NET_IP_ALIGN);
 			vp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE));
 			vp->rx_skbuff[entry] = skb;
 		}

drivers/net/8390.c

@@ -9,42 +9,39 @@ int ei_open(struct net_device *dev)
 {
 	return __ei_open(dev);
 }
+EXPORT_SYMBOL(ei_open);
 
 int ei_close(struct net_device *dev)
 {
 	return __ei_close(dev);
 }
+EXPORT_SYMBOL(ei_close);
 
 irqreturn_t ei_interrupt(int irq, void *dev_id)
 {
 	return __ei_interrupt(irq, dev_id);
 }
+EXPORT_SYMBOL(ei_interrupt);
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 void ei_poll(struct net_device *dev)
 {
 	__ei_poll(dev);
 }
+EXPORT_SYMBOL(ei_poll);
 #endif
 
 struct net_device *__alloc_ei_netdev(int size)
 {
 	return ____alloc_ei_netdev(size);
 }
+EXPORT_SYMBOL(__alloc_ei_netdev);
 
 void NS8390_init(struct net_device *dev, int startp)
 {
 	__NS8390_init(dev, startp);
 }
-
-EXPORT_SYMBOL(ei_open);
-EXPORT_SYMBOL(ei_close);
-EXPORT_SYMBOL(ei_interrupt);
-#ifdef CONFIG_NET_POLL_CONTROLLER
-EXPORT_SYMBOL(ei_poll);
-#endif
 EXPORT_SYMBOL(NS8390_init);
-EXPORT_SYMBOL(__alloc_ei_netdev);
 
 #if defined(MODULE)
 

drivers/net/8390p.c

@@ -4,52 +4,49 @@ static const char version[] =
     "8390p.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
 
 #define ei_inb(_p)	inb(_p)
-#define ei_outb(_v,_p)	outb(_v,_p)
+#define ei_outb(_v, _p)	outb(_v, _p)
 #define ei_inb_p(_p)	inb_p(_p)
-#define ei_outb_p(_v,_p) outb_p(_v,_p)
+#define ei_outb_p(_v, _p) outb_p(_v, _p)
 
 #include "lib8390.c"
 
 int eip_open(struct net_device *dev)
 {
 	return __ei_open(dev);
 }
+EXPORT_SYMBOL(eip_open);
 
 int eip_close(struct net_device *dev)
 {
 	return __ei_close(dev);
 }
+EXPORT_SYMBOL(eip_close);
 
 irqreturn_t eip_interrupt(int irq, void *dev_id)
 {
 	return __ei_interrupt(irq, dev_id);
 }
+EXPORT_SYMBOL(eip_interrupt);
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 void eip_poll(struct net_device *dev)
 {
 	__ei_poll(dev);
 }
+EXPORT_SYMBOL(eip_poll);
 #endif
 
 struct net_device *__alloc_eip_netdev(int size)
 {
 	return ____alloc_ei_netdev(size);
 }
+EXPORT_SYMBOL(__alloc_eip_netdev);
 
 void NS8390p_init(struct net_device *dev, int startp)
 {
-	return __NS8390_init(dev, startp);
+	__NS8390_init(dev, startp);
 }
-
-EXPORT_SYMBOL(eip_open);
-EXPORT_SYMBOL(eip_close);
-EXPORT_SYMBOL(eip_interrupt);
-#ifdef CONFIG_NET_POLL_CONTROLLER
-EXPORT_SYMBOL(eip_poll);
-#endif
 EXPORT_SYMBOL(NS8390p_init);
-EXPORT_SYMBOL(__alloc_eip_netdev);
 
 #if defined(MODULE)