leds: support new LP8501 device - another LP55xx common

LP8501 can drive up to 9 channels like LP5523.
LEDs can be controlled directly via the I2C and programmable engines are
supported.

LP55xx common driver
 LP8501 is one of LP55xx family device, so LP55xx common code are used.
 Chip specific data is defined in the structure, 'lp55xx_device_config'.

Differences between LP8501 and LP5523
 Different register layout for LED output control and others.
 LP8501 specific feature for separate output power selection.
 LP8501 doesn't support external clock detection.
 Different programming engine data.

LP8501 specific feature - output power selection
 Output channels are selected by power selection - Vout or Vdd.
 Separate power for VDD1-6 and VDD7-9 are available.
 It is configurable in the platform data.
 To support this feature, LP55xx DT structure and header are changed.
 Device tree binding is updated as well.

LED pattern data
 Example pattern data is updated in the driver documentation.

Signed-off-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>

Documentation/devicetree/bindings/leds/leds-lp55xx.txt

@@ -1,7 +1,7 @@
 Binding for TI/National Semiconductor LP55xx Led Drivers
 
 Required properties:
-- compatible: "national,lp5521" or "national,lp5523" or "ti,lp5562"
+- compatible: "national,lp5521" or "national,lp5523" or "ti,lp5562" or "ti,lp8501"
 - reg: I2C slave address
 - clock-mode: Input clock mode, (0: automode, 1: internal, 2: external)
 
@@ -11,6 +11,11 @@ Each child has own specific current settings
 
 Optional properties:
 - label: Used for naming LEDs
+- pwr-sel: LP8501 specific property. Power selection for output channels.
+         0: D1~9 are connected to VDD
+         1: D1~6 with VDD, D7~9 with VOUT
+         2: D1~6 with VOUT, D7~9 with VDD
+         3: D1~9 are connected to VOUT
 
 Alternatively, each child can have specific channel name
 - chan-name: Name of each channel name
@@ -145,3 +150,68 @@ lp5562@30 {
 		max-cur = /bits/ 8 <0x60>;
 	};
 };
+
+example 4) LP8501
+9 channels are defined. The 'pwr-sel' is LP8501 specific property.
+Others are same as LP5523.
+
+lp8501@32 {
+	compatible = "ti,lp8501";
+	reg = <0x32>;
+	clock-mode = /bits/ 8 <2>;
+	pwr-sel = /bits/ 8 <3>;	/* D1~9 connected to VOUT */
+
+	chan0 {
+		chan-name = "d1";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan1 {
+		chan-name = "d2";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan2 {
+		chan-name = "d3";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan3 {
+		chan-name = "d4";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan4 {
+		chan-name = "d5";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan5 {
+		chan-name = "d6";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan6 {
+		chan-name = "d7";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan7 {
+		chan-name = "d8";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan8 {
+		chan-name = "d9";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+};

Documentation/leds/leds-lp55xx.txt

@@ -1,11 +1,11 @@
-LP5521/LP5523/LP55231 Common Driver
-===================================
+LP5521/LP5523/LP55231/LP5562/LP8501 Common Driver
+=================================================
 
 Authors: Milo(Woogyom) Kim <milo.kim@ti.com>
 
 Description
 -----------
-LP5521, LP5523/55231 and LP5562 have common features as below.
+LP5521, LP5523/55231, LP5562 and LP8501 have common features as below.
 
   Register access via the I2C
   Device initialization/deinitialization
@@ -109,6 +109,30 @@ As soon as 'loading' is set to 0, registered callback is called.
 Inside the callback, the selected engine is loaded and memory is updated.
 To run programmed pattern, 'run_engine' attribute should be enabled.
 
+The pattern sqeuence of LP8501 is same as LP5523.
+However pattern data is specific.
+Ex 1) Engine 1 is used
+echo 1 > /sys/bus/i2c/devices/xxxx/select_engine
+echo 1 > /sys/class/firmware/lp8501/loading
+echo "9d0140ff7e0040007e00a001c000" > /sys/class/firmware/lp8501/data
+echo 0 > /sys/class/firmware/lp8501/loading
+echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
+
+Ex 2) Engine 2 and 3 are used at the same time
+echo 2 > /sys/bus/i2c/devices/xxxx/select_engine
+sleep 1
+echo 1 > /sys/class/firmware/lp8501/loading
+echo "9d0140ff7e0040007e00a001c000" > /sys/class/firmware/lp8501/data
+echo 0 > /sys/class/firmware/lp8501/loading
+sleep 1
+echo 3 > /sys/bus/i2c/devices/xxxx/select_engine
+sleep 1
+echo 1 > /sys/class/firmware/lp8501/loading
+echo "9d0340ff7e0040007e00a001c000" > /sys/class/firmware/lp8501/data
+echo 0 > /sys/class/firmware/lp8501/loading
+sleep 1
+echo 1 > /sys/class/leds/d1/device/run_engine
+
 ( 'run_engine' and 'firmware_cb' )
 The sequence of running the program data is common.
 But each device has own specific register addresses for commands.

drivers/leds/Kconfig

@@ -194,11 +194,11 @@ config LEDS_LP3944
 	  module will be called leds-lp3944.
 
 config LEDS_LP55XX_COMMON
-	tristate "Common Driver for TI/National LP5521, LP5523/55231 and LP5562"
-	depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562
+	tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
+	depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501
 	select FW_LOADER
 	help
-	  This option supports common operations for LP5521 and LP5523/55231
+	  This option supports common operations for LP5521/5523/55231/5562/8501
 	  devices.
 
 config LEDS_LP5521
@@ -232,6 +232,18 @@ config LEDS_LP5562
 	  Driver provides direct control via LED class and interface for
 	  programming the engines.
 
+config LEDS_LP8501
+	tristate "LED Support for TI LP8501 LED driver chip"
+	depends on LEDS_CLASS && I2C
+	select LEDS_LP55XX_COMMON
+	help
+	  If you say yes here you get support for TI LP8501 LED driver.
+	  It is 9 channel chip with programmable engines.
+	  Driver provides direct control via LED class and interface for
+	  programming the engines.
+	  It is similar as LP5523, but output power selection is available.
+	  And register layout and engine program schemes are different.
+
 config LEDS_LP8788
 	tristate "LED support for the TI LP8788 PMIC"
 	depends on LEDS_CLASS

drivers/leds/Makefile

@@ -27,6 +27,7 @@ obj-$(CONFIG_LEDS_LP55XX_COMMON)	+= leds-lp55xx-common.o
 obj-$(CONFIG_LEDS_LP5521)		+= leds-lp5521.o
 obj-$(CONFIG_LEDS_LP5523)		+= leds-lp5523.o
 obj-$(CONFIG_LEDS_LP5562)		+= leds-lp5562.o
+obj-$(CONFIG_LEDS_LP8501)		+= leds-lp8501.o
 obj-$(CONFIG_LEDS_LP8788)		+= leds-lp8788.o
 obj-$(CONFIG_LEDS_TCA6507)		+= leds-tca6507.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o

drivers/leds/leds-lp55xx-common.c

@@ -593,6 +593,9 @@ int lp55xx_of_populate_pdata(struct device *dev, struct device_node *np)
 	of_property_read_string(np, "label", &pdata->label);
 	of_property_read_u8(np, "clock-mode", &pdata->clock_mode);
 
+	/* LP8501 specific */
+	of_property_read_u8(np, "pwr-sel", (u8 *)&pdata->pwr_sel);
+
 	dev->platform_data = pdata;
 
 	return 0;