Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/jkirsher/net-next

Jeff Kirsher says:

====================
This series contains updates to e100 and e1000e.

The e100 patch from Andy simply updates the netif_printk() to use
%*ph to dump small buffers.

The changes to e1000e include a fix from Dean Nelson to resolve a
issue where a pci_clear_master() was accidentally dropped during a
conflict resolution. Wei Young provides 2 patches, one removes an
assignment of the default ring size because it was a duplicate. The
second changes the packet split receive structure to use
PS_PAGE_BUFFERS macro for the length so that problems won't occur
when the length is changed.

The remaining patches for e1000e are from Bruce Allan, where he
provides a number of fixes and updates for I218.  In addition, a
fix for 82583 which can disappear off the PCIe bus, to resolve this,
disable ASPM L1.  Bruce also provides a fix to a previous commit
(commit e60b22c e1000e: fix accessing to suspended device) so that
devices are only taken out of runtime power management for those
ethtool operations that must access device registers.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/e100.c

@@ -1175,15 +1175,12 @@ static int e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 		config->rx_discard_short_frames = 0x0;  /* 1=discard, 0=save */
 	}
 
-	netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
-		     "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
-		     c[0], c[1], c[2], c[3], c[4], c[5], c[6], c[7]);
-	netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
-		     "[08-15]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
-		     c[8], c[9], c[10], c[11], c[12], c[13], c[14], c[15]);
-	netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
-		     "[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
-		     c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
+	netif_printk(nic, hw, KERN_DEBUG, nic->netdev, "[00-07]=%8ph\n",
+		     c + 0);
+	netif_printk(nic, hw, KERN_DEBUG, nic->netdev, "[08-15]=%8ph\n",
+		     c + 8);
+	netif_printk(nic, hw, KERN_DEBUG, nic->netdev, "[16-23]=%8ph\n",
+		     c + 16);
 	return 0;
 }
 

drivers/net/ethernet/intel/e1000e/82571.c

@@ -2057,6 +2057,7 @@ const struct e1000_info e1000_82583_info = {
 				  | FLAG_HAS_JUMBO_FRAMES
 				  | FLAG_HAS_CTRLEXT_ON_LOAD,
 	.flags2			= FLAG2_DISABLE_ASPM_L0S
+				  | FLAG2_DISABLE_ASPM_L1
 				  | FLAG2_NO_DISABLE_RX,
 	.pba			= 32,
 	.max_hw_frame_size	= DEFAULT_JUMBO,

drivers/net/ethernet/intel/e1000e/e1000.h

@@ -90,9 +90,6 @@ struct e1000_info;
 
 #define E1000_MNG_VLAN_NONE		(-1)
 
-/* Number of packet split data buffers (not including the header buffer) */
-#define PS_PAGE_BUFFERS			(MAX_PS_BUFFERS - 1)
-
 #define DEFAULT_JUMBO			9234
 
 /* Time to wait before putting the device into D3 if there's no link (in ms). */

drivers/net/ethernet/intel/e1000e/ethtool.c

@@ -173,7 +173,7 @@ static int e1000_get_settings(struct net_device *netdev,
 			speed = adapter->link_speed;
 			ecmd->duplex = adapter->link_duplex - 1;
 		}
-	} else {
+	} else if (!pm_runtime_suspended(netdev->dev.parent)) {
 		u32 status = er32(STATUS);
 		if (status & E1000_STATUS_LU) {
 			if (status & E1000_STATUS_SPEED_1000)
@@ -264,28 +264,35 @@ static int e1000_set_settings(struct net_device *netdev,
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
+	int ret_val = 0;
+
+	pm_runtime_get_sync(netdev->dev.parent);
 
 	/* When SoL/IDER sessions are active, autoneg/speed/duplex
 	 * cannot be changed
 	 */
 	if (hw->phy.ops.check_reset_block &&
 	    hw->phy.ops.check_reset_block(hw)) {
 		e_err("Cannot change link characteristics when SoL/IDER is active.\n");
-		return -EINVAL;
+		ret_val = -EINVAL;
+		goto out;
 	}
 
 	/* MDI setting is only allowed when autoneg enabled because
 	 * some hardware doesn't allow MDI setting when speed or
 	 * duplex is forced.
 	 */
 	if (ecmd->eth_tp_mdix_ctrl) {
-		if (hw->phy.media_type != e1000_media_type_copper)
-			return -EOPNOTSUPP;
+		if (hw->phy.media_type != e1000_media_type_copper) {
+			ret_val = -EOPNOTSUPP;
+			goto out;
+		}
 
 		if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) &&
 		    (ecmd->autoneg != AUTONEG_ENABLE)) {
 			e_err("forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n");
-			return -EINVAL;
+			ret_val = -EINVAL;
+			goto out;
 		}
 	}
 
@@ -307,8 +314,8 @@ static int e1000_set_settings(struct net_device *netdev,
 		u32 speed = ethtool_cmd_speed(ecmd);
 		/* calling this overrides forced MDI setting */
 		if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
-			clear_bit(__E1000_RESETTING, &adapter->state);
-			return -EINVAL;
+			ret_val = -EINVAL;
+			goto out;
 		}
 	}
 
@@ -331,8 +338,10 @@ static int e1000_set_settings(struct net_device *netdev,
 		e1000e_reset(adapter);
 	}
 
+out:
+	pm_runtime_put_sync(netdev->dev.parent);
 	clear_bit(__E1000_RESETTING, &adapter->state);
-	return 0;
+	return ret_val;
 }
 
 static void e1000_get_pauseparam(struct net_device *netdev,
@@ -366,6 +375,8 @@ static int e1000_set_pauseparam(struct net_device *netdev,
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
 		usleep_range(1000, 2000);
 
+	pm_runtime_get_sync(netdev->dev.parent);
+
 	if (adapter->fc_autoneg == AUTONEG_ENABLE) {
 		hw->fc.requested_mode = e1000_fc_default;
 		if (netif_running(adapter->netdev)) {
@@ -398,6 +409,7 @@ static int e1000_set_pauseparam(struct net_device *netdev,
 	}
 
 out:
+	pm_runtime_put_sync(netdev->dev.parent);
 	clear_bit(__E1000_RESETTING, &adapter->state);
 	return retval;
 }
@@ -428,6 +440,8 @@ static void e1000_get_regs(struct net_device *netdev,
 	u32 *regs_buff = p;
 	u16 phy_data;
 
+	pm_runtime_get_sync(netdev->dev.parent);
+
 	memset(p, 0, E1000_REGS_LEN * sizeof(u32));
 
 	regs->version = (1 << 24) | (adapter->pdev->revision << 16) |
@@ -472,6 +486,8 @@ static void e1000_get_regs(struct net_device *netdev,
 	e1e_rphy(hw, MII_STAT1000, &phy_data);
 	regs_buff[24] = (u32)phy_data;	/* phy local receiver status */
 	regs_buff[25] = regs_buff[24];	/* phy remote receiver status */
+
+	pm_runtime_put_sync(netdev->dev.parent);
 }
 
 static int e1000_get_eeprom_len(struct net_device *netdev)
@@ -504,6 +520,8 @@ static int e1000_get_eeprom(struct net_device *netdev,
 	if (!eeprom_buff)
 		return -ENOMEM;
 
+	pm_runtime_get_sync(netdev->dev.parent);
+
 	if (hw->nvm.type == e1000_nvm_eeprom_spi) {
 		ret_val = e1000_read_nvm(hw, first_word,
 					 last_word - first_word + 1,
@@ -517,6 +535,8 @@ static int e1000_get_eeprom(struct net_device *netdev,
 		}
 	}
 
+	pm_runtime_put_sync(netdev->dev.parent);
+
 	if (ret_val) {
 		/* a read error occurred, throw away the result */
 		memset(eeprom_buff, 0xff, sizeof(u16) *
@@ -566,6 +586,8 @@ static int e1000_set_eeprom(struct net_device *netdev,
 
 	ptr = (void *)eeprom_buff;
 
+	pm_runtime_get_sync(netdev->dev.parent);
+
 	if (eeprom->offset & 1) {
 		/* need read/modify/write of first changed EEPROM word */
 		/* only the second byte of the word is being modified */
@@ -606,6 +628,7 @@ static int e1000_set_eeprom(struct net_device *netdev,
 		ret_val = e1000e_update_nvm_checksum(hw);
 
 out:
+	pm_runtime_put_sync(netdev->dev.parent);
 	kfree(eeprom_buff);
 	return ret_val;
 }
@@ -701,6 +724,8 @@ static int e1000_set_ringparam(struct net_device *netdev,
 		}
 	}
 
+	pm_runtime_get_sync(netdev->dev.parent);
+
 	e1000e_down(adapter);
 
 	/* We can't just free everything and then setup again, because the
@@ -739,6 +764,7 @@ static int e1000_set_ringparam(struct net_device *netdev,
 		e1000e_free_tx_resources(temp_tx);
 err_setup:
 	e1000e_up(adapter);
+	pm_runtime_put_sync(netdev->dev.parent);
 free_temp:
 	vfree(temp_tx);
 	vfree(temp_rx);
@@ -1732,6 +1758,8 @@ static void e1000_diag_test(struct net_device *netdev,
 	u8 autoneg;
 	bool if_running = netif_running(netdev);
 
+	pm_runtime_get_sync(netdev->dev.parent);
+
 	set_bit(__E1000_TESTING, &adapter->state);
 
 	if (!if_running) {
@@ -1817,6 +1845,8 @@ static void e1000_diag_test(struct net_device *netdev,
 	}
 
 	msleep_interruptible(4 * 1000);
+
+	pm_runtime_put_sync(netdev->dev.parent);
 }
 
 static void e1000_get_wol(struct net_device *netdev,
@@ -1891,6 +1921,8 @@ static int e1000_set_phys_id(struct net_device *netdev,
 
 	switch (state) {
 	case ETHTOOL_ID_ACTIVE:
+		pm_runtime_get_sync(netdev->dev.parent);
+
 		if (!hw->mac.ops.blink_led)
 			return 2;	/* cycle on/off twice per second */
 
@@ -1902,6 +1934,7 @@ static int e1000_set_phys_id(struct net_device *netdev,
 			e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
 		hw->mac.ops.led_off(hw);
 		hw->mac.ops.cleanup_led(hw);
+		pm_runtime_put_sync(netdev->dev.parent);
 		break;
 
 	case ETHTOOL_ID_ON:
@@ -1912,6 +1945,7 @@ static int e1000_set_phys_id(struct net_device *netdev,
 		hw->mac.ops.led_off(hw);
 		break;
 	}
+
 	return 0;
 }
 
@@ -1950,11 +1984,15 @@ static int e1000_set_coalesce(struct net_device *netdev,
 		adapter->itr_setting = adapter->itr & ~3;
 	}
 
+	pm_runtime_get_sync(netdev->dev.parent);
+
 	if (adapter->itr_setting != 0)
 		e1000e_write_itr(adapter, adapter->itr);
 	else
 		e1000e_write_itr(adapter, 0);
 
+	pm_runtime_put_sync(netdev->dev.parent);
+
 	return 0;
 }
 
@@ -1968,7 +2006,9 @@ static int e1000_nway_reset(struct net_device *netdev)
 	if (!adapter->hw.mac.autoneg)
 		return -EINVAL;
 
+	pm_runtime_get_sync(netdev->dev.parent);
 	e1000e_reinit_locked(adapter);
+	pm_runtime_put_sync(netdev->dev.parent);
 
 	return 0;
 }
@@ -1982,7 +2022,12 @@ static void e1000_get_ethtool_stats(struct net_device *netdev,
 	int i;
 	char *p = NULL;
 
+	pm_runtime_get_sync(netdev->dev.parent);
+
 	e1000e_get_stats64(netdev, &net_stats);
+
+	pm_runtime_put_sync(netdev->dev.parent);
+
 	for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
 		switch (e1000_gstrings_stats[i].type) {
 		case NETDEV_STATS:
@@ -2033,7 +2078,11 @@ static int e1000_get_rxnfc(struct net_device *netdev,
 	case ETHTOOL_GRXFH: {
 		struct e1000_adapter *adapter = netdev_priv(netdev);
 		struct e1000_hw *hw = &adapter->hw;
-		u32 mrqc = er32(MRQC);
+		u32 mrqc;
+
+		pm_runtime_get_sync(netdev->dev.parent);
+		mrqc = er32(MRQC);
+		pm_runtime_put_sync(netdev->dev.parent);
 
 		if (!(mrqc & E1000_MRQC_RSS_FIELD_MASK))
 			return 0;
@@ -2096,9 +2145,13 @@ static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
 		return -EOPNOTSUPP;
 	}
 
+	pm_runtime_get_sync(netdev->dev.parent);
+
 	ret_val = hw->phy.ops.acquire(hw);
-	if (ret_val)
+	if (ret_val) {
+		pm_runtime_put_sync(netdev->dev.parent);
 		return -EBUSY;
+	}
 
 	/* EEE Capability */
 	ret_val = e1000_read_emi_reg_locked(hw, cap_addr, &phy_data);
@@ -2117,14 +2170,11 @@ static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
 
 	/* EEE PCS Status */
 	ret_val = e1000_read_emi_reg_locked(hw, pcs_stat_addr, &phy_data);
+	if (ret_val)
+		goto release;
 	if (hw->phy.type == e1000_phy_82579)
 		phy_data <<= 8;
 
-release:
-	hw->phy.ops.release(hw);
-	if (ret_val)
-		return -ENODATA;
-
 	/* Result of the EEE auto negotiation - there is no register that
 	 * has the status of the EEE negotiation so do a best-guess based
 	 * on whether Tx or Rx LPI indications have been received.
@@ -2136,7 +2186,14 @@ static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
 	edata->tx_lpi_enabled = true;
 	edata->tx_lpi_timer = er32(LPIC) >> E1000_LPIC_LPIET_SHIFT;
 
-	return 0;
+release:
+	hw->phy.ops.release(hw);
+	if (ret_val)
+		ret_val = -ENODATA;
+
+	pm_runtime_put_sync(netdev->dev.parent);
+
+	return ret_val;
 }
 
 static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata)
@@ -2169,12 +2226,16 @@ static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata)
 
 	hw->dev_spec.ich8lan.eee_disable = !edata->eee_enabled;
 
+	pm_runtime_get_sync(netdev->dev.parent);
+
 	/* reset the link */
 	if (netif_running(netdev))
 		e1000e_reinit_locked(adapter);
 	else
 		e1000e_reset(adapter);
 
+	pm_runtime_put_sync(netdev->dev.parent);
+
 	return 0;
 }
 
@@ -2212,19 +2273,7 @@ static int e1000e_get_ts_info(struct net_device *netdev,
 	return 0;
 }
 
-static int e1000e_ethtool_begin(struct net_device *netdev)
-{
-	return pm_runtime_get_sync(netdev->dev.parent);
-}
-
-static void e1000e_ethtool_complete(struct net_device *netdev)
-{
-	pm_runtime_put_sync(netdev->dev.parent);
-}
-
 static const struct ethtool_ops e1000_ethtool_ops = {
-	.begin			= e1000e_ethtool_begin,
-	.complete		= e1000e_ethtool_complete,
 	.get_settings		= e1000_get_settings,
 	.set_settings		= e1000_set_settings,
 	.get_drvinfo		= e1000_get_drvinfo,