Merge remote branch 'intel/drm-intel-next' of ../drm-next into drm-co…

…re-next

* 'intel/drm-intel-next' of ../drm-next: (755 commits)
  drm/i915: Only wait on a pending flip if we intend to write to the buffer
  drm/i915/dp: Sanity check eDP existence
  drm/i915: Rebind the buffer if its alignment constraints changes with tiling
  drm/i915: Disable GPU semaphores by default
  drm/i915: Do not overflow the MMADDR write FIFO
  Revert "drm/i915: fix corruptions on i8xx due to relaxed fencing"
  drm/i915: Don't save/restore hardware status page address register
  drm/i915: don't store the reg value for HWS_PGA
  drm/i915: fix memory corruption with GM965 and >4GB RAM
  Linux 2.6.38-rc7
  Revert "TPM: Long default timeout fix"
  drm/i915: Re-enable GPU semaphores for SandyBridge mobile
  drm/i915: Replace vblank PM QoS with "Interrupt-Based AGPBUSY#"
  Revert "drm/i915: Use PM QoS to prevent C-State starvation of gen3 GPU"
  drm/i915: Allow relocation deltas outside of target bo
  drm/i915: Silence an innocuous compiler warning for an unused variable
  fs/block_dev.c: fix new kernel-doc warning
  ACPI: Fix build for CONFIG_NET unset
  mm: <asm-generic/pgtable.h> must include <linux/mm_types.h>
  x86: Use u32 instead of long to set reset vector back to 0
  ...

Conflicts:
	drivers/gpu/drm/i915/i915_gem.c

.gitignore

@@ -28,6 +28,7 @@ modules.builtin
 *.gz
 *.bz2
 *.lzma
+*.xz
 *.lzo
 *.patch
 *.gcno

Documentation/DocBook/drm.tmpl

@@ -73,8 +73,8 @@
       services.
     </para>
     <para>
-      The core of every DRM driver is struct drm_device.  Drivers
-      will typically statically initialize a drm_device structure,
+      The core of every DRM driver is struct drm_driver.  Drivers
+      will typically statically initialize a drm_driver structure,
       then pass it to drm_init() at load time.
     </para>
 
@@ -84,7 +84,7 @@
     <title>Driver initialization</title>
     <para>
       Before calling the DRM initialization routines, the driver must
-      first create and fill out a struct drm_device structure.
+      first create and fill out a struct drm_driver structure.
     </para>
     <programlisting>
       static struct drm_driver driver = {

Documentation/DocBook/filesystems.tmpl

@@ -82,6 +82,11 @@
      </sect1>
   </chapter>
 
+  <chapter id="fs_events">
+     <title>Events based on file descriptors</title>
+!Efs/eventfd.c
+  </chapter>
+
   <chapter id="sysfs">
      <title>The Filesystem for Exporting Kernel Objects</title>
 !Efs/sysfs/file.c

Documentation/hwmon/jc42

@@ -51,7 +51,8 @@ Supported chips:
   * JEDEC JC 42.4 compliant temperature sensor chips
     Prefix: 'jc42'
     Addresses scanned: I2C 0x18 - 0x1f
-    Datasheet: -
+    Datasheet:
+	http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf
 
 Author:
 	Guenter Roeck <guenter.roeck@ericsson.com>
@@ -60,7 +61,11 @@ Author:
 Description
 -----------
 
-This driver implements support for JEDEC JC 42.4 compliant temperature sensors.
+This driver implements support for JEDEC JC 42.4 compliant temperature sensors,
+which are used on many DDR3 memory modules for mobile devices and servers. Some
+systems use the sensor to prevent memory overheating by automatically throttling
+the memory controller.
+
 The driver auto-detects the chips listed above, but can be manually instantiated
 to support other JC 42.4 compliant chips.
 
@@ -81,15 +86,19 @@ limits. The chip supports only a single register to configure the hysteresis,
 which applies to all limits. This register can be written by writing into
 temp1_crit_hyst. Other hysteresis attributes are read-only.
 
+If the BIOS has configured the sensor for automatic temperature management, it
+is likely that it has locked the registers, i.e., that the temperature limits
+cannot be changed.
+
 Sysfs entries
 -------------
 
 temp1_input		Temperature (RO)
-temp1_min		Minimum temperature (RW)
-temp1_max		Maximum temperature (RW)
-temp1_crit		Critical high temperature (RW)
+temp1_min		Minimum temperature (RO or RW)
+temp1_max		Maximum temperature (RO or RW)
+temp1_crit		Critical high temperature (RO or RW)
 
-temp1_crit_hyst		Critical hysteresis temperature (RW)
+temp1_crit_hyst		Critical hysteresis temperature (RO or RW)
 temp1_max_hyst		Maximum hysteresis temperature (RO)
 
 temp1_min_alarm		Temperature low alarm

Documentation/hwmon/k10temp

@@ -9,6 +9,8 @@ Supported chips:
   Socket S1G3: Athlon II, Sempron, Turion II
 * AMD Family 11h processors:
   Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
+* AMD Family 12h processors: "Llano"
+* AMD Family 14h processors: "Brazos" (C/E/G-Series)
 
   Prefix: 'k10temp'
   Addresses scanned: PCI space
@@ -17,10 +19,14 @@ Supported chips:
     http://support.amd.com/us/Processor_TechDocs/31116.pdf
   BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41256.pdf
+  BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
+    http://support.amd.com/us/Processor_TechDocs/43170.pdf
   Revision Guide for AMD Family 10h Processors:
     http://support.amd.com/us/Processor_TechDocs/41322.pdf
   Revision Guide for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41788.pdf
+  Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
+    http://support.amd.com/us/Processor_TechDocs/47534.pdf
   AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
     http://support.amd.com/us/Processor_TechDocs/43373.pdf
   AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
@@ -34,7 +40,7 @@ Description
 -----------
 
 This driver permits reading of the internal temperature sensor of AMD
-Family 10h and 11h processors.
+Family 10h/11h/12h/14h processors.
 
 All these processors have a sensor, but on those for Socket F or AM2+,
 the sensor may return inconsistent values (erratum 319).  The driver

Documentation/kernel-parameters.txt

@@ -144,6 +144,11 @@ a fixed number of characters. This limit depends on the architecture
 and is between 256 and 4096 characters. It is defined in the file
 ./include/asm/setup.h as COMMAND_LINE_SIZE.
 
+Finally, the [KMG] suffix is commonly described after a number of kernel
+parameter values. These 'K', 'M', and 'G' letters represent the _binary_
+multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30
+bytes respectively. Such letter suffixes can also be entirely omitted.
+
 
 	acpi=		[HW,ACPI,X86]
 			Advanced Configuration and Power Interface
@@ -545,16 +550,20 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format:
 			<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
 
-	crashkernel=nn[KMG]@ss[KMG]
-			[KNL] Reserve a chunk of physical memory to
-			hold a kernel to switch to with kexec on panic.
+	crashkernel=size[KMG][@offset[KMG]]
+			[KNL] Using kexec, Linux can switch to a 'crash kernel'
+			upon panic. This parameter reserves the physical
+			memory region [offset, offset + size] for that kernel
+			image. If '@offset' is omitted, then a suitable offset
+			is selected automatically. Check
+			Documentation/kdump/kdump.txt for further details.
 
 	crashkernel=range1:size1[,range2:size2,...][@offset]
 			[KNL] Same as above, but depends on the memory
 			in the running system. The syntax of range is
 			start-[end] where start and end are both
 			a memory unit (amount[KMG]). See also
-			Documentation/kdump/kdump.txt for a example.
+			Documentation/kdump/kdump.txt for an example.
 
 	cs89x0_dma=	[HW,NET]
 			Format: <dma>
@@ -1262,10 +1271,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			6 (KERN_INFO)		informational
 			7 (KERN_DEBUG)		debug-level messages
 
-	log_buf_len=n	Sets the size of the printk ring buffer, in bytes.
-			Format: { n | nk | nM }
-			n must be a power of two.  The default size
-			is set in the kernel config file.
+	log_buf_len=n[KMG]	Sets the size of the printk ring buffer,
+			in bytes.  n must be a power of two.  The default
+			size is set in the kernel config file.
 
 	logo.nologo	[FB] Disables display of the built-in Linux logo.
 			This may be used to provide more screen space for

Documentation/networking/Makefile

@@ -4,6 +4,8 @@ obj- := dummy.o
 # List of programs to build
 hostprogs-y := ifenslave
 
+HOSTCFLAGS_ifenslave.o += -I$(objtree)/usr/include
+
 # Tell kbuild to always build the programs
 always := $(hostprogs-y)
 

Documentation/workqueue.txt

@@ -190,9 +190,9 @@ resources, scheduled and executed.
 	* Long running CPU intensive workloads which can be better
 	  managed by the system scheduler.
 
-  WQ_FREEZEABLE
+  WQ_FREEZABLE
 
-	A freezeable wq participates in the freeze phase of the system
+	A freezable wq participates in the freeze phase of the system
 	suspend operations.  Work items on the wq are drained and no
 	new work item starts execution until thawed.
 

MAINTAINERS

@@ -885,7 +885,7 @@ S:	Supported
 
 ARM/QUALCOMM MSM MACHINE SUPPORT
 M:	David Brown <davidb@codeaurora.org>
-M:	Daniel Walker <dwalker@codeaurora.org>
+M:	Daniel Walker <dwalker@fifo99.com>
 M:	Bryan Huntsman <bryanh@codeaurora.org>
 L:	linux-arm-msm@vger.kernel.org
 F:	arch/arm/mach-msm/
@@ -1692,6 +1692,13 @@ M:	Andy Whitcroft <apw@canonical.com>
 S:	Supported
 F:	scripts/checkpatch.pl
 
+CHINESE DOCUMENTATION
+M:	Harry Wei <harryxiyou@gmail.com>
+L:	xiyoulinuxkernelgroup@googlegroups.com
+L:	linux-kernel@zh-kernel.org (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/zh_CN/
+
 CISCO VIC ETHERNET NIC DRIVER
 M:	Vasanthy Kolluri <vkolluri@cisco.com>
 M:	Roopa Prabhu <roprabhu@cisco.com>
@@ -2126,6 +2133,7 @@ S:	Supported
 F:	fs/dlm/
 
 DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
+M:	Vinod Koul <vinod.koul@intel.com>
 M:	Dan Williams <dan.j.williams@intel.com>
 S:	Supported
 F:	drivers/dma/
@@ -2774,6 +2782,15 @@ F:	Documentation/isdn/README.gigaset
 F:	drivers/isdn/gigaset/
 F:	include/linux/gigaset_dev.h
 
+GPIO SUBSYSTEM
+M:	Grant Likely <grant.likely@secretlab.ca>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+T:	git git://git.secretlab.ca/git/linux-2.6.git
+F:	Documentation/gpio/gpio.txt
+F:	drivers/gpio/
+F:	include/linux/gpio*
+
 GRETH 10/100/1G Ethernet MAC device driver
 M:	Kristoffer Glembo <kristoffer@gaisler.com>
 L:	netdev@vger.kernel.org
@@ -2863,7 +2880,6 @@ M:	Guenter Roeck <guenter.roeck@ericsson.com>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
-T:	quilt kernel.org/pub/linux/kernel/people/groeck/linux-staging/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
 S:	Maintained
 F:	Documentation/hwmon/
@@ -4591,7 +4607,7 @@ F:	drivers/i2c/busses/i2c-ocores.c
 
 OPEN FIRMWARE AND FLATTENED DEVICE TREE
 M:	Grant Likely <grant.likely@secretlab.ca>
-L:	devicetree-discuss@lists.ozlabs.org
+L:	devicetree-discuss@lists.ozlabs.org (moderated for non-subscribers)
 W:	http://fdt.secretlab.ca
 T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
@@ -5257,7 +5273,7 @@ S:	Maintained
 F:	drivers/net/wireless/rtl818x/rtl8180/
 
 RTL8187 WIRELESS DRIVER
-M:	Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+M:	Herton Ronaldo Krzesinski <herton@canonical.com>
 M:	Hin-Tak Leung <htl10@users.sourceforge.net>
 M:	Larry Finger <Larry.Finger@lwfinger.net>
 L:	linux-wireless@vger.kernel.org
@@ -6095,7 +6111,7 @@ S:	Maintained
 F:	security/tomoyo/
 
 TOPSTAR LAPTOP EXTRAS DRIVER
-M:	Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+M:	Herton Ronaldo Krzesinski <herton@canonical.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/topstar-laptop.c

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 38
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc7
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -1177,6 +1177,31 @@ config ARM_ERRATA_743622
 	  visible impact on the overall performance or power consumption of the
 	  processor.
 
+config ARM_ERRATA_751472
+	bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for the 751472 Cortex-A9 (prior
+	  to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
+	  completion of a following broadcasted operation if the second
+	  operation is received by a CPU before the ICIALLUIS has completed,
+	  potentially leading to corrupted entries in the cache or TLB.
+
+config ARM_ERRATA_753970
+	bool "ARM errata: cache sync operation may be faulty"
+	depends on CACHE_PL310
+	help
+	  This option enables the workaround for the 753970 PL310 (r3p0) erratum.
+
+	  Under some condition the effect of cache sync operation on
+	  the store buffer still remains when the operation completes.
+	  This means that the store buffer is always asked to drain and
+	  this prevents it from merging any further writes. The workaround
+	  is to replace the normal offset of cache sync operation (0x730)
+	  by another offset targeting an unmapped PL310 register 0x740.
+	  This has the same effect as the cache sync operation: store buffer
+	  drain and waiting for all buffers empty.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -1391,7 +1416,7 @@ config AEABI
 
 config OABI_COMPAT
 	bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
-	depends on AEABI && EXPERIMENTAL
+	depends on AEABI && EXPERIMENTAL && !THUMB2_KERNEL
 	default y
 	help
 	  This option preserves the old syscall interface along with the

arch/arm/Makefile

@@ -15,7 +15,7 @@ ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux	+= --be8
 endif
 
-OBJCOPYFLAGS	:=-O binary -R .note -R .note.gnu.build-id -R .comment -S
+OBJCOPYFLAGS	:=-O binary -R .comment -S
 GZFLAGS		:=-9
 #KBUILD_CFLAGS	+=-pipe
 # Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb:

arch/arm/boot/compressed/.gitignore

@@ -1,3 +1,7 @@
 font.c
-piggy.gz
+lib1funcs.S
+piggy.gzip
+piggy.lzo
+piggy.lzma
+vmlinux
 vmlinux.lds

arch/arm/include/asm/hardware/cache-l2x0.h

@@ -36,6 +36,7 @@
 #define L2X0_RAW_INTR_STAT		0x21C
 #define L2X0_INTR_CLEAR			0x220
 #define L2X0_CACHE_SYNC			0x730
+#define L2X0_DUMMY_REG			0x740
 #define L2X0_INV_LINE_PA		0x770
 #define L2X0_INV_WAY			0x77C
 #define L2X0_CLEAN_LINE_PA		0x7B0

arch/arm/include/asm/hardware/sp810.h

@@ -58,6 +58,9 @@
 
 static inline void sysctl_soft_reset(void __iomem *base)
 {
+	/* switch to slow mode */
+	writel(0x2, base + SCCTRL);
+
 	/* writing any value to SCSYSSTAT reg will reset system */
 	writel(0, base + SCSYSSTAT);
 }