Merge branch 'for-5.17/letsketch' into for-linus

- new driver to support for LetSketch device (Hans de Goede)

.mailmap

@@ -126,6 +126,8 @@ Greg Kroah-Hartman <gregkh@suse.de>
 Greg Kroah-Hartman <greg@kroah.com>
 Greg Kurz <groug@kaod.org> <gkurz@linux.vnet.ibm.com>
 Gregory CLEMENT <gregory.clement@bootlin.com> <gregory.clement@free-electrons.com>
+Guo Ren <guoren@kernel.org> <guoren@linux.alibaba.com>
+Guo Ren <guoren@kernel.org> <ren_guo@c-sky.com>
 Gustavo Padovan <gustavo@las.ic.unicamp.br>
 Gustavo Padovan <padovan@profusion.mobi>
 Hanjun Guo <guohanjun@huawei.com> <hanjun.guo@linaro.org>

Documentation/devicetree/bindings/i2c/apple,i2c.yaml

@@ -20,9 +20,9 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - apple,t8103-i2c
-      - apple,i2c
+    items:
+      - const: apple,t8103-i2c
+      - const: apple,i2c
 
   reg:
     maxItems: 1
@@ -51,7 +51,7 @@ unevaluatedProperties: false
 examples:
   - |
     i2c@35010000 {
-      compatible = "apple,t8103-i2c";
+      compatible = "apple,t8103-i2c", "apple,i2c";
       reg = <0x35010000 0x4000>;
       interrupt-parent = <&aic>;
       interrupts = <0 627 4>;

Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml

@@ -136,7 +136,7 @@ examples:
         samsung,syscon-phandle = <&pmu_system_controller>;
 
         /* NTC thermistor is a hwmon device */
-        ncp15wb473 {
+        thermistor {
             compatible = "murata,ncp15wb473";
             pullup-uv = <1800000>;
             pullup-ohm = <47000>;

Documentation/devicetree/bindings/input/gpio-keys.yaml

@@ -142,7 +142,7 @@ examples:
         down {
             label = "GPIO Key DOWN";
             linux,code = <108>;
-            interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+            interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
         };
     };
 

Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml

@@ -79,6 +79,8 @@ properties:
 
             properties:
               data-lanes:
+                description:
+                  Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data lines.
                 items:
                   minItems: 1
                   maxItems: 4
@@ -91,18 +93,6 @@ properties:
             required:
               - data-lanes
 
-            allOf:
-              - if:
-                  properties:
-                    compatible:
-                      contains:
-                        const: fsl,imx7-mipi-csi2
-                then:
-                  properties:
-                    data-lanes:
-                      items:
-                        maxItems: 2
-
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description:

Documentation/devicetree/bindings/net/ethernet-phy.yaml

@@ -91,6 +91,14 @@ properties:
       compensate for the board being designed with the lanes
       swapped.
 
+  enet-phy-lane-no-swap:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, indicates that PHY will disable swap of the
+      TX/RX lanes. This property allows the PHY to work correcly after
+      e.g. wrong bootstrap configuration caused by issues in PCB
+      layout design.
+
   eee-broken-100tx:
     $ref: /schemas/types.yaml#/definitions/flag
     description:

Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml

@@ -29,7 +29,7 @@ properties:
           - PHY_TYPE_PCIE
           - PHY_TYPE_SATA
           - PHY_TYPE_SGMII
-          - PHY_TYPE_USB
+          - PHY_TYPE_USB3
       - description: The PHY instance
         minimum: 0
         maximum: 1 # for DP, SATA or USB

Documentation/devicetree/bindings/power/supply/bq25980.yaml

@@ -105,7 +105,7 @@ examples:
           reg = <0x65>;
           interrupt-parent = <&gpio1>;
           interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
-          ti,watchdog-timer = <0>;
+          ti,watchdog-timeout-ms = <0>;
           ti,sc-ocp-limit-microamp = <2000000>;
           ti,sc-ovp-limit-microvolt = <17800000>;
           monitored-battery = <&bat>;

Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml

@@ -51,6 +51,19 @@ patternProperties:
     description:
       Properties for single BUCK regulator.
 
+    properties:
+      op_mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 1
+        description: |
+          Describes the different operating modes of the regulator with power
+          mode change in SOC. The different possible values are:
+            0 - always off mode
+            1 - on in normal mode
+            2 - low power mode
+            3 - suspend mode
+
     required:
       - regulator-name
 
@@ -63,6 +76,18 @@ patternProperties:
       Properties for single BUCK regulator.
 
     properties:
+      op_mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 1
+        description: |
+          Describes the different operating modes of the regulator with power
+          mode change in SOC. The different possible values are:
+            0 - always off mode
+            1 - on in normal mode
+            2 - low power mode
+            3 - suspend mode
+
       s5m8767,pmic-ext-control-gpios:
         maxItems: 1
         description: |

Documentation/devicetree/bindings/sound/wlf,wm8962.yaml

@@ -19,6 +19,9 @@ properties:
   clocks:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
   "#sound-dai-cells":
     const: 0
 

Documentation/locking/locktypes.rst

@@ -439,11 +439,9 @@ preemption. The following substitution works on both kernels::
   spin_lock(&p->lock);
   p->count += this_cpu_read(var2);
 
-On a non-PREEMPT_RT kernel migrate_disable() maps to preempt_disable()
-which makes the above code fully equivalent. On a PREEMPT_RT kernel
 migrate_disable() ensures that the task is pinned on the current CPU which
 in turn guarantees that the per-CPU access to var1 and var2 are staying on
-the same CPU.
+the same CPU while the task remains preemptible.
 
 The migrate_disable() substitution is not valid for the following
 scenario::
@@ -456,9 +454,8 @@ scenario::
     p = this_cpu_ptr(&var1);
     p->val = func2();
 
-While correct on a non-PREEMPT_RT kernel, this breaks on PREEMPT_RT because
-here migrate_disable() does not protect against reentrancy from a
-preempting task. A correct substitution for this case is::
+This breaks because migrate_disable() does not protect against reentrancy from
+a preempting task. A correct substitution for this case is::
 
   func()
   {

Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst

@@ -440,6 +440,22 @@ NOTE: For 82599-based network connections, if you are enabling jumbo frames in
 a virtual function (VF), jumbo frames must first be enabled in the physical
 function (PF). The VF MTU setting cannot be larger than the PF MTU.
 
+NBASE-T Support
+---------------
+The ixgbe driver supports NBASE-T on some devices. However, the advertisement
+of NBASE-T speeds is suppressed by default, to accommodate broken network
+switches which cannot cope with advertised NBASE-T speeds. Use the ethtool
+command to enable advertising NBASE-T speeds on devices which support it::
+
+  ethtool -s eth? advertise 0x1800000001028
+
+On Linux systems with INTERFACES(5), this can be specified as a pre-up command
+in /etc/network/interfaces so that the interface is always brought up with
+NBASE-T support, e.g.::
+
+  iface eth? inet dhcp
+       pre-up ethtool -s eth? advertise 0x1800000001028 || true
+
 Generic Receive Offload, aka GRO
 --------------------------------
 The driver supports the in-kernel software implementation of GRO. GRO has

MAINTAINERS

@@ -3066,7 +3066,7 @@ F:	Documentation/devicetree/bindings/phy/phy-ath79-usb.txt
 F:	drivers/phy/qualcomm/phy-ath79-usb.c
 
 ATHEROS ATH GENERIC UTILITIES
-M:	Kalle Valo <kvalo@codeaurora.org>
+M:	Kalle Valo <kvalo@kernel.org>
 L:	linux-wireless@vger.kernel.org
 S:	Supported
 F:	drivers/net/wireless/ath/*
@@ -3081,7 +3081,7 @@ W:	https://wireless.wiki.kernel.org/en/users/Drivers/ath5k
 F:	drivers/net/wireless/ath/ath5k/
 
 ATHEROS ATH6KL WIRELESS DRIVER
-M:	Kalle Valo <kvalo@codeaurora.org>
+M:	Kalle Valo <kvalo@kernel.org>
 L:	linux-wireless@vger.kernel.org
 S:	Supported
 W:	https://wireless.wiki.kernel.org/en/users/Drivers/ath6kl
@@ -9329,7 +9329,6 @@ S:	Maintained
 F:	drivers/iio/pressure/dps310.c
 
 INFINIBAND SUBSYSTEM
-M:	Doug Ledford <dledford@redhat.com>
 M:	Jason Gunthorpe <jgg@nvidia.com>
 L:	linux-rdma@vger.kernel.org
 S:	Supported
@@ -10280,9 +10279,9 @@ F:	lib/Kconfig.kcsan
 F:	scripts/Makefile.kcsan
 
 KDUMP
-M:	Dave Young <dyoung@redhat.com>
 M:	Baoquan He <bhe@redhat.com>
 R:	Vivek Goyal <vgoyal@redhat.com>
+R:	Dave Young <dyoung@redhat.com>
 L:	kexec@lists.infradead.org
 S:	Maintained
 W:	http://lse.sourceforge.net/kdump/
@@ -10746,6 +10745,13 @@ S:	Maintained
 W:	http://legousb.sourceforge.net/
 F:	drivers/usb/misc/legousbtower.c
 
+LETSKETCH HID TABLET DRIVER
+M:	Hans de Goede <hdegoede@redhat.com>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git
+F:	drivers/hid/hid-letsketch.c
+
 LG LAPTOP EXTRAS
 M:	Matan Ziv-Av <matan@svgalib.org>
 L:	platform-driver-x86@vger.kernel.org
@@ -12180,8 +12186,8 @@ F:	drivers/net/ethernet/mellanox/mlx5/core/fpga/*
 F:	include/linux/mlx5/mlx5_ifc_fpga.h
 
 MELLANOX ETHERNET SWITCH DRIVERS
-M:	Jiri Pirko <jiri@nvidia.com>
 M:	Ido Schimmel <idosch@nvidia.com>
+M:	Petr Machata <petrm@nvidia.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 W:	http://www.mellanox.com
@@ -13249,7 +13255,7 @@ F:	include/uapi/linux/if_*
 F:	include/uapi/linux/netdevice.h
 
 NETWORKING DRIVERS (WIRELESS)
-M:	Kalle Valo <kvalo@codeaurora.org>
+M:	Kalle Valo <kvalo@kernel.org>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 Q:	http://patchwork.kernel.org/project/linux-wireless/list/
@@ -15705,15 +15711,15 @@ T:	git git://linuxtv.org/anttip/media_tree.git
 F:	drivers/media/tuners/qt1010*
 
 QUALCOMM ATHEROS ATH10K WIRELESS DRIVER
-M:	Kalle Valo <kvalo@codeaurora.org>
+M:	Kalle Valo <kvalo@kernel.org>
 L:	ath10k@lists.infradead.org
 S:	Supported
 W:	https://wireless.wiki.kernel.org/en/users/Drivers/ath10k
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
 F:	drivers/net/wireless/ath/ath10k/
 
 QUALCOMM ATHEROS ATH11K WIRELESS DRIVER
-M:	Kalle Valo <kvalo@codeaurora.org>
+M:	Kalle Valo <kvalo@kernel.org>
 L:	ath11k@lists.infradead.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
@@ -15771,6 +15777,15 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/net/qcom,ethqos.txt
 F:	drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
 
+QUALCOMM FASTRPC DRIVER
+M:	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+M:	Amol Maheshwari <amahesh@qti.qualcomm.com>
+L:	linux-arm-msm@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/misc/qcom,fastrpc.txt
+F:	drivers/misc/fastrpc.c
+F:	include/uapi/misc/fastrpc.h
+
 QUALCOMM GENERIC INTERFACE I2C DRIVER
 M:	Akash Asthana <akashast@codeaurora.org>
 M:	Mukesh Savaliya <msavaliy@codeaurora.org>
@@ -15877,7 +15892,7 @@ F:	Documentation/devicetree/bindings/media/*venus*
 F:	drivers/media/platform/qcom/venus/
 
 QUALCOMM WCN36XX WIRELESS DRIVER
-M:	Kalle Valo <kvalo@codeaurora.org>
+M:	Kalle Valo <kvalo@kernel.org>
 L:	wcn36xx@lists.infradead.org
 S:	Supported
 W:	https://wireless.wiki.kernel.org/en/users/Drivers/wcn36xx
@@ -16629,7 +16644,6 @@ W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	drivers/iommu/s390-iommu.c
 
 S390 IUCV NETWORK LAYER
-M:	Julian Wiedmann <jwi@linux.ibm.com>
 M:	Alexandra Winter <wintera@linux.ibm.com>
 M:	Wenjia Zhang <wenjia@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
@@ -16641,7 +16655,6 @@ F:	include/net/iucv/
 F:	net/iucv/
 
 S390 NETWORK DRIVERS
-M:	Julian Wiedmann <jwi@linux.ibm.com>
 M:	Alexandra Winter <wintera@linux.ibm.com>
 M:	Wenjia Zhang <wenjia@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
@@ -21053,7 +21066,7 @@ S:	Maintained
 F:	arch/x86/kernel/cpu/zhaoxin.c
 
 ZONEFS FILESYSTEM
-M:	Damien Le Moal <damien.lemoal@wdc.com>
+M:	Damien Le Moal <damien.lemoal@opensource.wdc.com>
 M:	Naohiro Aota <naohiro.aota@wdc.com>
 R:	Johannes Thumshirn <jth@kernel.org>
 L:	linux-fsdevel@vger.kernel.org

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 16
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc6
 NAME = Gobble Gobble
 
 # *DOCUMENTATION*
@@ -1374,17 +1374,17 @@ endif
 
 ifneq ($(dtstree),)
 
-%.dtb: dt_binding_check include/config/kernel.release scripts_dtc
-	$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ $(dtstree)/$*.dt.yaml
+%.dtb: include/config/kernel.release scripts_dtc
+	$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
 
-%.dtbo: dt_binding_check include/config/kernel.release scripts_dtc
-	$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ $(dtstree)/$*.dt.yaml
+%.dtbo: include/config/kernel.release scripts_dtc
+	$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
 
 PHONY += dtbs dtbs_install dtbs_check
 dtbs: include/config/kernel.release scripts_dtc
 	$(Q)$(MAKE) $(build)=$(dtstree)
 
-ifneq ($(filter dtbs_check %.dtb %.dtbo, $(MAKECMDGOALS)),)
+ifneq ($(filter dtbs_check, $(MAKECMDGOALS)),)
 export CHECK_DTBS=y
 dtbs: dt_binding_check
 endif

arch/arm/boot/dts/imx6qp-prtwd3.dts

@@ -178,6 +178,8 @@
 				label = "cpu";
 				ethernet = <&fec>;
 				phy-mode = "rgmii-id";
+				rx-internal-delay-ps = <2000>;
+				tx-internal-delay-ps = <2000>;
 
 				fixed-link {
 					speed = <100>;

arch/arm/boot/dts/imx6ull-pinfunc.h

@@ -82,6 +82,6 @@
 #define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS                         0x01F4 0x0480 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0                       0x01FC 0x0488 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA07__ESAI_T0                            0x0200 0x048C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA07__ESAI_TX0                           0x0200 0x048C 0x0000 0x9 0x0
 
 #endif /* __DTS_IMX6ULL_PINFUNC_H */