Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux in…

…to rmobile-fixes-for-linus

Documentation/DocBook/device-drivers.tmpl

@@ -50,7 +50,9 @@
 
      <sect1><title>Delaying, scheduling, and timer routines</title>
 !Iinclude/linux/sched.h
-!Ekernel/sched.c
+!Ekernel/sched/core.c
+!Ikernel/sched/cpupri.c
+!Ikernel/sched/fair.c
 !Iinclude/linux/completion.h
 !Ekernel/timer.c
      </sect1>
@@ -100,9 +102,12 @@ X!Iinclude/linux/kobject.h
 !Iinclude/linux/device.h
      </sect1>
      <sect1><title>Device Drivers Base</title>
+!Idrivers/base/init.c
 !Edrivers/base/driver.c
 !Edrivers/base/core.c
+!Edrivers/base/syscore.c
 !Edrivers/base/class.c
+!Idrivers/base/node.c
 !Edrivers/base/firmware_class.c
 !Edrivers/base/transport_class.c
 <!-- Cannot be included, because
@@ -111,13 +116,18 @@ X!Iinclude/linux/kobject.h
      exceed allowed 44 characters maximum
 X!Edrivers/base/attribute_container.c
 -->
-!Edrivers/base/sys.c
+!Edrivers/base/dd.c
 <!--
 X!Edrivers/base/interface.c
 -->
 !Iinclude/linux/platform_device.h
 !Edrivers/base/platform.c
 !Edrivers/base/bus.c
+     </sect1>
+     <sect1><title>Device Drivers DMA Management</title>
+!Edrivers/base/dma-buf.c
+!Edrivers/base/dma-coherent.c
+!Edrivers/base/dma-mapping.c
      </sect1>
      <sect1><title>Device Drivers Power Management</title>
 !Edrivers/base/power/main.c
@@ -216,9 +226,8 @@ X!Isound/sound_firmware.c
 
   <chapter id="uart16x50">
      <title>16x50 UART Driver</title>
-!Iinclude/linux/serial_core.h
 !Edrivers/tty/serial/serial_core.c
-!Edrivers/tty/serial/8250.c
+!Edrivers/tty/serial/8250/8250.c
   </chapter>
 
   <chapter id="fbdev">

Documentation/DocBook/deviceiobook.tmpl

@@ -317,7 +317,7 @@ CPU B:  spin_unlock_irqrestore(&dev_lock, flags)
   <chapter id="pubfunctions">
      <title>Public Functions Provided</title>
 !Iarch/x86/include/asm/io.h
-!Elib/iomap.c
+!Elib/pci_iomap.c
   </chapter>
 
 </book>

Documentation/DocBook/media/dvb/dvbproperty.xml

@@ -163,14 +163,16 @@ get/set up to 64 properties. The actual meaning of each property is described on
 	<section id="DTV-FREQUENCY">
 		<title><constant>DTV_FREQUENCY</constant></title>
 
-		<para>Central frequency of the channel, in HZ.</para>
+		<para>Central frequency of the channel.</para>
 
 		<para>Notes:</para>
-		<para>1)For ISDB-T, the channels are usually transmitted with an offset of 143kHz.
+		<para>1)For satellital delivery systems, it is measured in kHz.
+			For the other ones, it is measured in Hz.</para>
+		<para>2)For ISDB-T, the channels are usually transmitted with an offset of 143kHz.
 			E.g. a valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of
 			the channel which is 6MHz.</para>
 
-		<para>2)As in ISDB-Tsb the channel consists of only one or three segments the
+		<para>3)As in ISDB-Tsb the channel consists of only one or three segments the
 			frequency step is 429kHz, 3*429 respectively. As for ISDB-T the
 			central frequency of the channel is expected.</para>
 	</section>
@@ -735,14 +737,10 @@ typedef enum fe_hierarchy {
 			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
-			<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
-			<listitem><para><link linkend="DTV-CODE-RATE-HP"><constant>DTV_CODE_RATE_HP</constant></link></para></listitem>
-			<listitem><para><link linkend="DTV-CODE-RATE-LP"><constant>DTV_CODE_RATE_LP</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem>
-			<listitem><para><link linkend="DTV-HIERARCHY"><constant>DTV_HIERARCHY</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-ISDBT-LAYER-ENABLED"><constant>DTV_ISDBT_LAYER_ENABLED</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-ISDBT-PARTIAL-RECEPTION"><constant>DTV_ISDBT_PARTIAL_RECEPTION</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-ISDBT-SOUND-BROADCASTING"><constant>DTV_ISDBT_SOUND_BROADCASTING</constant></link></para></listitem>

Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml

@@ -183,7 +183,12 @@ applications must set the array to zero.</entry>
 	    <entry>__u32</entry>
 	    <entry><structfield>ctrl_class</structfield></entry>
 	    <entry>The control class to which all controls belong, see
-<xref linkend="ctrl-class" />.</entry>
+<xref linkend="ctrl-class" />. Drivers that use a kernel framework for handling
+controls will also accept a value of 0 here, meaning that the controls can
+belong to any control class. Whether drivers support this can be tested by setting
+<structfield>ctrl_class</structfield> to 0 and calling <constant>VIDIOC_TRY_EXT_CTRLS</constant>
+with a <structfield>count</structfield> of 0. If that succeeds, then the driver
+supports this feature.</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>
@@ -194,10 +199,13 @@ also be zero.</entry>
 	  <row>
 	    <entry>__u32</entry>
 	    <entry><structfield>error_idx</structfield></entry>
-	    <entry>Set by the driver in case of an error. It is the
-index of the control causing the error or equal to 'count' when the
-error is not associated with a particular control. Undefined when the
-ioctl returns 0 (success).</entry>
+	    <entry>Set by the driver in case of an error. If it is equal
+to <structfield>count</structfield>, then no actual changes were made to
+controls. In other words, the error was not associated with setting a particular
+control. If it is another value, then only the controls up to <structfield>error_idx-1</structfield>
+were modified and control <structfield>error_idx</structfield> is the one that
+caused the error. The <structfield>error_idx</structfield> value is undefined
+if the ioctl returned 0 (success).</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>

Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml

@@ -364,15 +364,20 @@ capability and it is cleared otherwise.</entry>
 	  <row>
 	    <entry><constant>V4L2_FBUF_FLAG_OVERLAY</constant></entry>
 	    <entry>0x0002</entry>
-	    <entry>The frame buffer is an overlay surface the same
-size as the capture. [?]</entry>
-	  </row>
-	  <row>
-	    <entry spanname="hspan">The purpose of
-<constant>V4L2_FBUF_FLAG_OVERLAY</constant> was never quite clear.
-Most drivers seem to ignore this flag. For compatibility with the
-<wordasword>bttv</wordasword> driver applications should set the
-<constant>V4L2_FBUF_FLAG_OVERLAY</constant> flag.</entry>
+	    <entry>If this flag is set for a video capture device, then the
+driver will set the initial overlay size to cover the full framebuffer size,
+otherwise the existing overlay size (as set by &VIDIOC-S-FMT;) will be used.
+
+Only one video capture driver (bttv) supports this flag. The use of this flag
+for capture devices is deprecated. There is no way to detect which drivers
+support this flag, so the only reliable method of setting the overlay size is
+through &VIDIOC-S-FMT;.
+
+If this flag is set for a video output device, then the video output overlay
+window is relative to the top-left corner of the framebuffer and restricted
+to the size of the framebuffer. If it is cleared, then the video output
+overlay window is relative to the video output display.
+            </entry>
 	  </row>
 	  <row>
 	    <entry><constant>V4L2_FBUF_FLAG_CHROMAKEY</constant></entry>

Documentation/DocBook/media/v4l/vidioc-g-frequency.xml

@@ -98,8 +98,11 @@ the &v4l2-output; <structfield>modulator</structfield> field and the
 	    <entry>&v4l2-tuner-type;</entry>
 	    <entry><structfield>type</structfield></entry>
 	    <entry>The tuner type. This is the same value as in the
-&v4l2-tuner; <structfield>type</structfield> field. The field is not
-applicable to modulators, &ie; ignored by drivers.</entry>
+&v4l2-tuner; <structfield>type</structfield> field. The type must be set
+to <constant>V4L2_TUNER_RADIO</constant> for <filename>/dev/radioX</filename>
+device nodes, and to <constant>V4L2_TUNER_ANALOG_TV</constant>
+for all others. The field is not applicable to modulators, &ie; ignored
+by drivers.</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>

Documentation/DocBook/media/v4l/vidioc-g-input.xml

@@ -61,8 +61,8 @@ desired input in an integer and call the
 <constant>VIDIOC_S_INPUT</constant> ioctl with a pointer to this
 integer. Side effects are possible. For example inputs may support
 different video standards, so the driver may implicitly switch the
-current standard. It is good practice to select an input before
-querying or negotiating any other parameters.</para>
+current standard. Because of these possible side effects applications
+must select an input before querying or negotiating any other parameters.</para>
 
     <para>Information about video inputs is available using the
 &VIDIOC-ENUMINPUT; ioctl.</para>

Documentation/DocBook/media/v4l/vidioc-g-output.xml

@@ -61,8 +61,9 @@ desired output in an integer and call the
 <constant>VIDIOC_S_OUTPUT</constant> ioctl with a pointer to this integer.
 Side effects are possible. For example outputs may support different
 video standards, so the driver may implicitly switch the current
-standard. It is good practice to select an output before querying or
-negotiating any other parameters.</para>
+standard.
+standard. Because of these possible side effects applications
+must select an output before querying or negotiating any other parameters.</para>
 
     <para>Information about video outputs is available using the
 &VIDIOC-ENUMOUTPUT; ioctl.</para>

Documentation/acpi/apei/einj.txt

@@ -47,20 +47,53 @@ directory apei/einj. The following files are provided.
 
 - param1
   This file is used to set the first error parameter value. Effect of
-  parameter depends on error_type specified. For memory error, this is
-  physical memory address.  Only available if param_extension module
-  parameter is specified.
+  parameter depends on error_type specified.
 
 - param2
   This file is used to set the second error parameter value. Effect of
-  parameter depends on error_type specified. For memory error, this is
-  physical memory address mask.  Only available if param_extension
-  module parameter is specified.
+  parameter depends on error_type specified.
+
+BIOS versions based in the ACPI 4.0 specification have limited options
+to control where the errors are injected.  Your BIOS may support an
+extension (enabled with the param_extension=1 module parameter, or
+boot command line einj.param_extension=1). This allows the address
+and mask for memory injections to be specified by the param1 and
+param2 files in apei/einj.
+
+BIOS versions using the ACPI 5.0 specification have more control over
+the target of the injection. For processor related errors (type 0x1,
+0x2 and 0x4) the APICID of the target should be provided using the
+param1 file in apei/einj. For memory errors (type 0x8, 0x10 and 0x20)
+the address is set using param1 with a mask in param2 (0x0 is equivalent
+to all ones). For PCI express errors (type 0x40, 0x80 and 0x100) the
+segment, bus, device and function are specified using param1:
+
+         31     24 23    16 15    11 10      8  7        0
+	+-------------------------------------------------+
+	| segment |   bus  | device | function | reserved |
+	+-------------------------------------------------+
+
+An ACPI 5.0 BIOS may also allow vendor specific errors to be injected.
+In this case a file named vendor will contain identifying information
+from the BIOS that hopefully will allow an application wishing to use
+the vendor specific extension to tell that they are running on a BIOS
+that supports it. All vendor extensions have the 0x80000000 bit set in
+error_type. A file vendor_flags controls the interpretation of param1
+and param2 (1 = PROCESSOR, 2 = MEMORY, 4 = PCI). See your BIOS vendor
+documentation for details (and expect changes to this API if vendors
+creativity in using this feature expands beyond our expectations).
+
+Example:
+# cd /sys/kernel/debug/apei/einj
+# cat available_error_type		# See which errors can be injected
+0x00000002	Processor Uncorrectable non-fatal
+0x00000008	Memory Correctable
+0x00000010	Memory Uncorrectable non-fatal
+# echo 0x12345000 > param1		# Set memory address for injection
+# echo 0xfffffffffffff000 > param2	# Mask - anywhere in this page
+# echo 0x8 > error_type			# Choose correctable memory error
+# echo 1 > error_inject			# Inject now
 
-Injecting parameter support is a BIOS version specific extension, that
-is, it only works on some BIOS version.  If you want to use it, please
-make sure your BIOS version has the proper support and specify
-"param_extension=y" in module parameter.
 
 For more information about EINJ, please refer to ACPI specification
-version 4.0, section 17.5.
+version 4.0, section 17.5 and ACPI 5.0, section 18.6.

Documentation/devices.txt

@@ -447,6 +447,9 @@ Your cooperation is appreciated.
 		234 = /dev/btrfs-control	Btrfs control device
 		235 = /dev/autofs	Autofs control device
 		236 = /dev/mapper/control	Device-Mapper control device
+		237 = /dev/loop-control Loopback control device
+		238 = /dev/vhost-net	Host kernel accelerator for virtio net
+
 		240-254			Reserved for local use
 		255			Reserved for MISC_DYNAMIC_MINOR
 

Documentation/devicetree/bindings/dma/atmel-dma.txt

@@ -0,0 +1,14 @@
+* Atmel Direct Memory Access Controller (DMA)
+
+Required properties:
+- compatible: Should be "atmel,<chip>-dma"
+- reg: Should contain DMA registers location and length
+- interrupts: Should contain DMA interrupt
+
+Examples:
+
+dma@ffffec00 {
+	compatible = "atmel,at91sam9g45-dma";
+	reg = <0xffffec00 0x200>;
+	interrupts = <21>;
+};

Documentation/devicetree/bindings/i2c/omap-i2c.txt

@@ -0,0 +1,30 @@
+I2C for OMAP platforms
+
+Required properties :
+- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c"
+- ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Recommended properties :
+- clock-frequency : Desired I2C bus clock frequency in Hz. Otherwise
+  the default 100 kHz frequency will be used.
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Note: Current implementation will fetch base address, irq and dma
+from omap hwmod data base during device registration.
+Future plan is to migrate hwmod data base contents into device tree
+blob so that, all the required data will be used from device tree dts
+file.
+
+Examples :
+
+i2c1: i2c@0 {
+    compatible = "ti,omap3-i2c";
+    #address-cells = <1>;
+    #size-cells = <0>;
+    ti,hwmods = "i2c1";
+    clock-frequency = <400000>;
+};

Documentation/dmaengine.txt

@@ -75,6 +75,10 @@ The slave DMA usage consists of following steps:
    slave_sg	- DMA a list of scatter gather buffers from/to a peripheral
    dma_cyclic	- Perform a cyclic DMA operation from/to a peripheral till the
 		  operation is explicitly stopped.
+   interleaved_dma - This is common to Slave as well as M2M clients. For slave
+		 address of devices' fifo could be already known to the driver.
+		 Various types of operations could be expressed by setting
+		 appropriate values to the 'dma_interleaved_template' members.
 
    A non-NULL return of this transfer API represents a "descriptor" for
    the given transaction.
@@ -89,6 +93,10 @@ The slave DMA usage consists of following steps:
 		struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
 		size_t period_len, enum dma_data_direction direction);
 
+	struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)(
+		struct dma_chan *chan, struct dma_interleaved_template *xt,
+		unsigned long flags);
+
    The peripheral driver is expected to have mapped the scatterlist for
    the DMA operation prior to calling device_prep_slave_sg, and must
    keep the scatterlist mapped until the DMA operation has completed.

Documentation/driver-model/devres.txt

@@ -233,6 +233,10 @@ certainly invest a bit more effort into libata core layer).
   6. List of managed interfaces
   -----------------------------
 
+MEM
+  devm_kzalloc()
+  devm_kfree()
+
 IO region
   devm_request_region()
   devm_request_mem_region()

Documentation/feature-removal-schedule.txt

@@ -439,17 +439,6 @@ Who:	Jean Delvare <khali@linux-fr.org>
 
 ----------------------------
 
-What:	For VIDIOC_S_FREQUENCY the type field must match the device node's type.
-	If not, return -EINVAL.
-When:	3.2
-Why:	It makes no sense to switch the tuner to radio mode by calling
-	VIDIOC_S_FREQUENCY on a video node, or to switch the tuner to tv mode by
-	calling VIDIOC_S_FREQUENCY on a radio node. This is the first step of a
-	move to more consistent handling of tv and radio tuners.
-Who:	Hans Verkuil <hans.verkuil@cisco.com>
-
-----------------------------
-
 What:	Opening a radio device node will no longer automatically switch the
 	tuner mode from tv to radio.
 When:	3.3
@@ -521,3 +510,17 @@ Why:	The pci_scan_bus_parented() interface creates a new root bus.  The
 	convert to using pci_scan_root_bus() so they can supply a list of
 	bus resources when the bus is created.
 Who:	Bjorn Helgaas <bhelgaas@google.com>
+
+----------------------------
+
+What:	The CAP9 SoC family will be removed
+When:	3.4
+Files:	arch/arm/mach-at91/at91cap9.c
+	arch/arm/mach-at91/at91cap9_devices.c
+	arch/arm/mach-at91/include/mach/at91cap9.h
+	arch/arm/mach-at91/include/mach/at91cap9_matrix.h
+	arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
+	arch/arm/mach-at91/board-cap9adk.c
+Why:	The code is not actively maintained and platforms are now hard to find.
+Who:	Nicolas Ferre <nicolas.ferre@atmel.com>
+	Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>