net/mlx5: E-Switch, Refactor chains and priorities

To support the entire chain and prio range (32bit + 16bit),
instead of a using a static array of chains/prios of limited size, create
them dynamically, and use a rhashtable to search for existing chains/prio
combinations.

This will be used in next patch to actually increase the number using
unamanged tables support and ignore flow level capability.

Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

drivers/net/ethernet/mellanox/mlx5/core/Makefile

@@ -42,7 +42,7 @@ mlx5_core-$(CONFIG_PCI_HYPERV_INTERFACE) += en/hv_vhca_stats.o
 # Core extra
 #
 mlx5_core-$(CONFIG_MLX5_ESWITCH)   += eswitch.o eswitch_offloads.o eswitch_offloads_termtbl.o \
-				      ecpf.o rdma.o
+				      ecpf.o rdma.o eswitch_offloads_chains.o
 mlx5_core-$(CONFIG_MLX5_MPFS)      += lib/mpfs.o
 mlx5_core-$(CONFIG_VXLAN)          += lib/vxlan.o
 mlx5_core-$(CONFIG_PTP_1588_CLOCK) += lib/clock.o

drivers/net/ethernet/mellanox/mlx5/core/en_rep.c

@@ -41,6 +41,7 @@
 #include <net/ipv6_stubs.h>
 
 #include "eswitch.h"
+#include "eswitch_offloads_chains.h"
 #include "en.h"
 #include "en_rep.h"
 #include "en_tc.h"
@@ -1262,25 +1263,25 @@ static int mlx5e_rep_setup_ft_cb(enum tc_setup_type type, void *type_data,
 	case TC_SETUP_CLSFLOWER:
 		memcpy(&tmp, f, sizeof(*f));
 
-		if (!mlx5_eswitch_prios_supported(esw) ||
+		if (!mlx5_esw_chains_prios_supported(esw) ||
 		    tmp.common.chain_index)
 			return -EOPNOTSUPP;
 
 		/* Re-use tc offload path by moving the ft flow to the
 		 * reserved ft chain.
 		 *
-		 * FT offload can use prio range [0, INT_MAX], so we
-		 * normalize it to range [1, mlx5_eswitch_get_prio_range(esw)]
+		 * FT offload can use prio range [0, INT_MAX], so we normalize
+		 * it to range [1, mlx5_esw_chains_get_prio_range(esw)]
 		 * as with tc, where prio 0 isn't supported.
 		 *
 		 * We only support chain 0 of FT offload.
 		 */
-		if (tmp.common.prio >= mlx5_eswitch_get_prio_range(esw))
+		if (tmp.common.prio >= mlx5_esw_chains_get_prio_range(esw))
 			return -EOPNOTSUPP;
 		if (tmp.common.chain_index != 0)
 			return -EOPNOTSUPP;
 
-		tmp.common.chain_index = mlx5_eswitch_get_ft_chain(esw);
+		tmp.common.chain_index = mlx5_esw_chains_get_ft_chain(esw);
 		tmp.common.prio++;
 		err = mlx5e_rep_setup_tc_cls_flower(priv, &tmp, flags);
 		memcpy(&f->stats, &tmp.stats, sizeof(f->stats));

drivers/net/ethernet/mellanox/mlx5/core/en_tc.c

@@ -51,6 +51,7 @@
 #include "en_rep.h"
 #include "en_tc.h"
 #include "eswitch.h"
+#include "eswitch_offloads_chains.h"
 #include "fs_core.h"
 #include "en/port.h"
 #include "en/tc_tun.h"
@@ -1083,7 +1084,7 @@ mlx5e_tc_offload_to_slow_path(struct mlx5_eswitch *esw,
 	memcpy(slow_attr, flow->esw_attr, sizeof(*slow_attr));
 	slow_attr->action = MLX5_FLOW_CONTEXT_ACTION_FWD_DEST;
 	slow_attr->split_count = 0;
-	slow_attr->dest_chain = FDB_TC_SLOW_PATH_CHAIN;
+	slow_attr->flags |= MLX5_ESW_ATTR_FLAG_SLOW_PATH;
 
 	rule = mlx5e_tc_offload_fdb_rules(esw, flow, spec, slow_attr);
 	if (!IS_ERR(rule))
@@ -1100,7 +1101,7 @@ mlx5e_tc_unoffload_from_slow_path(struct mlx5_eswitch *esw,
 	memcpy(slow_attr, flow->esw_attr, sizeof(*slow_attr));
 	slow_attr->action = MLX5_FLOW_CONTEXT_ACTION_FWD_DEST;
 	slow_attr->split_count = 0;
-	slow_attr->dest_chain = FDB_TC_SLOW_PATH_CHAIN;
+	slow_attr->flags |= MLX5_ESW_ATTR_FLAG_SLOW_PATH;
 	mlx5e_tc_unoffload_fdb_rules(esw, flow, slow_attr);
 	flow_flag_clear(flow, SLOW);
 }
@@ -1160,19 +1161,18 @@ mlx5e_tc_add_fdb_flow(struct mlx5e_priv *priv,
 		      struct netlink_ext_ack *extack)
 {
 	struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
-	u32 max_chain = mlx5_eswitch_get_chain_range(esw);
 	struct mlx5_esw_flow_attr *attr = flow->esw_attr;
 	struct mlx5e_tc_flow_parse_attr *parse_attr = attr->parse_attr;
-	u16 max_prio = mlx5_eswitch_get_prio_range(esw);
 	struct net_device *out_dev, *encap_dev = NULL;
 	struct mlx5_fc *counter = NULL;
 	struct mlx5e_rep_priv *rpriv;
 	struct mlx5e_priv *out_priv;
 	bool encap_valid = true;
+	u32 max_prio, max_chain;
 	int err = 0;
 	int out_index;
 
-	if (!mlx5_eswitch_prios_supported(esw) && attr->prio != 1) {
+	if (!mlx5_esw_chains_prios_supported(esw) && attr->prio != 1) {
 		NL_SET_ERR_MSG(extack, "E-switch priorities unsupported, upgrade FW");
 		return -EOPNOTSUPP;
 	}
@@ -1182,11 +1182,13 @@ mlx5e_tc_add_fdb_flow(struct mlx5e_priv *priv,
 	 * FDB_FT_CHAIN which is outside tc range.
 	 * See mlx5e_rep_setup_ft_cb().
 	 */
+	max_chain = mlx5_esw_chains_get_chain_range(esw);
 	if (!mlx5e_is_ft_flow(flow) && attr->chain > max_chain) {
 		NL_SET_ERR_MSG(extack, "Requested chain is out of supported range");
 		return -EOPNOTSUPP;
 	}
 
+	max_prio = mlx5_esw_chains_get_prio_range(esw);
 	if (attr->prio > max_prio) {
 		NL_SET_ERR_MSG(extack, "Requested priority is out of supported range");
 		return -EOPNOTSUPP;
@@ -3469,7 +3471,7 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv,
 			break;
 		case FLOW_ACTION_GOTO: {
 			u32 dest_chain = act->chain_index;
-			u32 max_chain = mlx5_eswitch_get_chain_range(esw);
+			u32 max_chain = mlx5_esw_chains_get_chain_range(esw);
 
 			if (ft_flow) {
 				NL_SET_ERR_MSG_MOD(extack, "Goto action is not supported");

drivers/net/ethernet/mellanox/mlx5/core/eswitch.h

@@ -157,7 +157,7 @@ enum offloads_fdb_flags {
 	ESW_FDB_CHAINS_AND_PRIOS_SUPPORTED = BIT(0),
 };
 
-extern const unsigned int ESW_POOLS[4];
+struct mlx5_esw_chains_priv;
 
 struct mlx5_eswitch_fdb {
 	union {
@@ -182,14 +182,7 @@ struct mlx5_eswitch_fdb {
 			struct mlx5_flow_handle *miss_rule_multi;
 			int vlan_push_pop_refcount;
 
-			struct {
-				struct mlx5_flow_table *fdb;
-				u32 num_rules;
-			} fdb_prio[FDB_NUM_CHAINS][FDB_TC_MAX_PRIO + 1][FDB_TC_LEVELS_PER_PRIO];
-			/* Protects fdb_prio table */
-			struct mutex fdb_prio_lock;
-
-			int fdb_left[ARRAY_SIZE(ESW_POOLS)];
+			struct mlx5_esw_chains_priv *esw_chains_priv;
 		} offloads;
 	};
 	u32 flags;
@@ -355,18 +348,6 @@ mlx5_eswitch_del_fwd_rule(struct mlx5_eswitch *esw,
 			  struct mlx5_flow_handle *rule,
 			  struct mlx5_esw_flow_attr *attr);
 
-bool
-mlx5_eswitch_prios_supported(struct mlx5_eswitch *esw);
-
-u16
-mlx5_eswitch_get_prio_range(struct mlx5_eswitch *esw);
-
-u32
-mlx5_eswitch_get_chain_range(struct mlx5_eswitch *esw);
-
-unsigned int
-mlx5_eswitch_get_ft_chain(struct mlx5_eswitch *esw);
-
 struct mlx5_flow_handle *
 mlx5_eswitch_create_vport_rx_rule(struct mlx5_eswitch *esw, u16 vport,
 				  struct mlx5_flow_destination *dest);
@@ -391,6 +372,11 @@ enum {
 	MLX5_ESW_DEST_ENCAP_VALID   = BIT(1),
 };
 
+enum {
+	MLX5_ESW_ATTR_FLAG_VLAN_HANDLED  = BIT(0),
+	MLX5_ESW_ATTR_FLAG_SLOW_PATH     = BIT(1),
+};
+
 struct mlx5_esw_flow_attr {
 	struct mlx5_eswitch_rep *in_rep;
 	struct mlx5_core_dev	*in_mdev;
@@ -404,7 +390,6 @@ struct mlx5_esw_flow_attr {
 	u16	vlan_vid[MLX5_FS_VLAN_DEPTH];
 	u8	vlan_prio[MLX5_FS_VLAN_DEPTH];
 	u8	total_vlan;
-	bool	vlan_handled;
 	struct {
 		u32 flags;
 		struct mlx5_eswitch_rep *rep;
@@ -419,6 +404,7 @@ struct mlx5_esw_flow_attr {
 	u32	chain;
 	u16	prio;
 	u32	dest_chain;
+	u32	flags;
 	struct mlx5e_tc_flow_parse_attr *parse_attr;
 };