Merge tag 'powerpc-6.12-1' of git://git.kernel.org/pub/scm/linux/kern…

…el/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - Reduce alignment constraints on STRICT_KERNEL_RWX and speed-up TLB
   misses on 8xx and 603

 - Replace kretprobe code with rethook and enable fprobe

 - Remove the "fast endian switch" syscall

 - Handle DLPAR device tree updates in kernel, allowing the deprecation
   of the binary /proc/powerpc/ofdt interface

Thanks to Abhishek Dubey, Alex Shi, Benjamin Gray, Christophe Leroy,
Gaosheng Cui, Gautam Menghani, Geert Uytterhoeven, Haren Myneni, Hari
Bathini, Huang Xiaojia, Jinjie Ruan, Madhavan Srinivasan, Miguel Ojeda,
Mina Almasry, Narayana Murty N, Naveen Rao, Rob Herring (Arm), Scott
Cheloha, Segher Boessenkool, Stephen Rothwell, Thomas Zimmermann, Uwe
Kleine-König, Vaibhav Jain, and Zhang Zekun.

* tag 'powerpc-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (59 commits)
  powerpc/atomic: Use YZ constraints for DS-form instructions
  MAINTAINERS: powerpc: Add Maddy
  powerpc: Switch back to struct platform_driver::remove()
  powerpc/pseries/eeh: Fix pseries_eeh_err_inject
  selftests/powerpc: Allow building without static libc
  macintosh/via-pmu: register_pmu_pm_ops() can be __init
  powerpc: Stop using no_llseek
  powerpc/64s: Remove the "fast endian switch" syscall
  powerpc/mm/64s: Restrict THP to Radix or HPT w/64K pages
  powerpc/mm/64s: Move THP reqs into a separate symbol
  powerpc/64s: Make mmu_hash_ops __ro_after_init
  powerpc: Replace kretprobe code with rethook on powerpc
  powerpc: pseries: Constify struct kobj_type
  powerpc: powernv: Constify struct kobj_type
  powerpc: Constify struct kobj_type
  powerpc/pseries/dlpar: Add device tree nodes for DLPAR IO add
  powerpc/pseries/dlpar: Remove device tree node for DLPAR IO remove
  powerpc/pseries: Use correct data types from pseries_hp_errorlog struct
  powerpc/vdso: Inconditionally use CFUNC macro
  powerpc/32: Implement validation of emergency stack
  ...

CREDITS

@@ -378,6 +378,9 @@ S: 1549 Hiironen Rd.
 S: Brimson, MN  55602
 S: USA
 
+N: Arnd Bergmann
+D: Maintainer of Cell Broadband Engine Architecture
+
 N: Hennus Bergman
 P: 1024/77D50909 76 99 FD 31 91 E1 96 1C  90 BB 22 80 62 F6 BD 63
 D: Author and maintainer of the QIC-02 tape driver
@@ -1869,6 +1872,9 @@ S: K osmidomkum 723
 S: 160 00 Praha 6
 S: Czech Republic
 
+N: Jeremy Kerr
+D: Maintainer of SPU File System
+
 N: Michael Kerrisk
 E: mtk.manpages@gmail.com
 W: https://man7.org/

MAINTAINERS

@@ -5145,10 +5145,8 @@ F:	Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
 F:	drivers/media/cec/platform/cec-gpio/
 
 CELL BROADBAND ENGINE ARCHITECTURE
-M:	Arnd Bergmann <arnd@arndb.de>
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Supported
-W:	http://www.ibm.com/developerworks/power/cell/
+S:	Orphan
 F:	arch/powerpc/include/asm/cell*.h
 F:	arch/powerpc/include/asm/spu*.h
 F:	arch/powerpc/include/uapi/asm/spu*.h
@@ -12995,6 +12993,7 @@ M:	Michael Ellerman <mpe@ellerman.id.au>
 R:	Nicholas Piggin <npiggin@gmail.com>
 R:	Christophe Leroy <christophe.leroy@csgroup.eu>
 R:	Naveen N Rao <naveen@kernel.org>
+R:	Madhavan Srinivasan <maddy@linux.ibm.com>
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Supported
 W:	https://github.com/linuxppc/wiki/wiki
@@ -21672,10 +21671,8 @@ F:	include/linux/spmi.h
 F:	include/trace/events/spmi.h
 
 SPU FILE SYSTEM
-M:	Jeremy Kerr <jk@ozlabs.org>
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Supported
-W:	http://www.ibm.com/developerworks/power/cell/
+S:	Orphan
 F:	Documentation/filesystems/spufs/spufs.rst
 F:	arch/powerpc/platforms/cell/spufs/
 

arch/powerpc/Kconfig

@@ -269,6 +269,7 @@ config PPC
 	select HAVE_PERF_EVENTS_NMI		if PPC64
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
+	select HAVE_RETHOOK			if KPROBES
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_RELIABLE_STACKTRACE
 	select HAVE_RSEQ
@@ -854,8 +855,8 @@ config DATA_SHIFT_BOOL
 	bool "Set custom data alignment"
 	depends on ADVANCED_OPTIONS
 	depends on STRICT_KERNEL_RWX || DEBUG_PAGEALLOC || KFENCE
-	depends on PPC_BOOK3S_32 || (PPC_8xx && !PIN_TLB_DATA && !STRICT_KERNEL_RWX) || \
-		   PPC_85xx
+	depends on (PPC_8xx && !PIN_TLB_DATA && (!STRICT_KERNEL_RWX || !PIN_TLB_TEXT)) || \
+		   PPC_BOOK3S_32 || PPC_85xx
 	help
 	  This option allows you to set the kernel data alignment. When
 	  RAM is mapped by blocks, the alignment needs to fit the size and
@@ -871,9 +872,9 @@ config DATA_SHIFT
 	range 20 24 if (STRICT_KERNEL_RWX || DEBUG_PAGEALLOC || KFENCE) && PPC_85xx
 	default 22 if STRICT_KERNEL_RWX && PPC_BOOK3S_32
 	default 18 if (DEBUG_PAGEALLOC || KFENCE) && PPC_BOOK3S_32
-	default 23 if STRICT_KERNEL_RWX && PPC_8xx
-	default 23 if (DEBUG_PAGEALLOC || KFENCE) && PPC_8xx && PIN_TLB_DATA
-	default 19 if (DEBUG_PAGEALLOC || KFENCE) && PPC_8xx
+	default 23 if (STRICT_KERNEL_RWX || DEBUG_PAGEALLOC || KFENCE) && PPC_8xx && \
+		      (PIN_TLB_DATA || PIN_TLB_TEXT)
+	default 19 if (STRICT_KERNEL_RWX || DEBUG_PAGEALLOC || KFENCE) && PPC_8xx
 	default 24 if STRICT_KERNEL_RWX && PPC_85xx
 	default PAGE_SHIFT
 	help
@@ -1274,8 +1275,27 @@ config TASK_SIZE_BOOL
 config TASK_SIZE
 	hex "Size of user task space" if TASK_SIZE_BOOL
 	default "0x80000000" if PPC_8xx
-	default "0xb0000000" if PPC_BOOK3S_32
+	default "0xb0000000" if PPC_BOOK3S_32 && EXECMEM
 	default "0xc0000000"
+
+config MODULES_SIZE_BOOL
+	bool "Set custom size for modules/execmem area"
+	depends on EXECMEM && ADVANCED_OPTIONS
+	help
+	  This option allows you to set the size of kernel virtual address
+	  space dedicated for modules/execmem.
+	  For the time being it is only for 8xx and book3s/32. Other
+	  platform share it with vmalloc space.
+
+	  Say N here unless you know what you are doing.
+
+config MODULES_SIZE
+	int "Size of modules/execmem area (In Mbytes)" if MODULES_SIZE_BOOL
+	range 1 256 if EXECMEM
+	default 64 if EXECMEM && PPC_BOOK3S_32
+	default 32 if EXECMEM && PPC_8xx
+	default 0
+
 endmenu
 
 if PPC64

arch/powerpc/Kconfig.debug

@@ -379,12 +379,6 @@ config FAIL_IOMMU
 
 	  If you are unsure, say N.
 
-config PPC_FAST_ENDIAN_SWITCH
-	bool "Deprecated fast endian-switch syscall"
-	depends on DEBUG_KERNEL && PPC_BOOK3S_64
-	help
-	  If you're unsure what this is, say N.
-
 config KASAN_SHADOW_OFFSET
 	hex
 	depends on KASAN

arch/powerpc/configs/ppc64_defconfig

@@ -93,6 +93,7 @@ CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_KSM=y
 CONFIG_TRANSPARENT_HUGEPAGE=y
 CONFIG_MEM_SOFT_DIRTY=y
+CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
 CONFIG_ZONE_DEVICE=y
 CONFIG_NET=y
 CONFIG_PACKET=y

arch/powerpc/include/asm/asm-compat.h

@@ -26,19 +26,23 @@
 #define PPC_MIN_STKFRM	112
 
 #ifdef __BIG_ENDIAN__
-#define LHZX_BE	stringify_in_c(lhzx)
 #define LWZX_BE	stringify_in_c(lwzx)
 #define LDX_BE	stringify_in_c(ldx)
 #define STWX_BE	stringify_in_c(stwx)
 #define STDX_BE	stringify_in_c(stdx)
 #else
-#define LHZX_BE	stringify_in_c(lhbrx)
 #define LWZX_BE	stringify_in_c(lwbrx)
 #define LDX_BE	stringify_in_c(ldbrx)
 #define STWX_BE	stringify_in_c(stwbrx)
 #define STDX_BE	stringify_in_c(stdbrx)
 #endif
 
+#ifdef CONFIG_CC_IS_CLANG
+#define DS_FORM_CONSTRAINT "Z<>"
+#else
+#define DS_FORM_CONSTRAINT "YZ<>"
+#endif
+
 #else /* 32-bit */
 
 /* operations for longs and pointers */

arch/powerpc/include/asm/atomic.h

@@ -11,6 +11,7 @@
 #include <asm/cmpxchg.h>
 #include <asm/barrier.h>
 #include <asm/asm-const.h>
+#include <asm/asm-compat.h>
 
 /*
  * Since *_return_relaxed and {cmp}xchg_relaxed are implemented with
@@ -197,7 +198,7 @@ static __inline__ s64 arch_atomic64_read(const atomic64_t *v)
 	if (IS_ENABLED(CONFIG_PPC_KERNEL_PREFIXED))
 		__asm__ __volatile__("ld %0,0(%1)" : "=r"(t) : "b"(&v->counter));
 	else
-		__asm__ __volatile__("ld%U1%X1 %0,%1" : "=r"(t) : "m<>"(v->counter));
+		__asm__ __volatile__("ld%U1%X1 %0,%1" : "=r"(t) : DS_FORM_CONSTRAINT (v->counter));
 
 	return t;
 }
@@ -208,7 +209,7 @@ static __inline__ void arch_atomic64_set(atomic64_t *v, s64 i)
 	if (IS_ENABLED(CONFIG_PPC_KERNEL_PREFIXED))
 		__asm__ __volatile__("std %1,0(%2)" : "=m"(v->counter) : "r"(i), "b"(&v->counter));
 	else
-		__asm__ __volatile__("std%U0%X0 %1,%0" : "=m<>"(v->counter) : "r"(i));
+		__asm__ __volatile__("std%U0%X0 %1,%0" : "=" DS_FORM_CONSTRAINT (v->counter) : "r"(i));
 }
 
 #define ATOMIC64_OP(op, asm_op)						\

arch/powerpc/include/asm/book3s/32/pgtable.h

@@ -196,7 +196,8 @@ void unmap_kernel_page(unsigned long va);
 #endif
 
 #define MODULES_END	ALIGN_DOWN(PAGE_OFFSET, SZ_256M)
-#define MODULES_VADDR	(MODULES_END - SZ_256M)
+#define MODULES_SIZE	(CONFIG_MODULES_SIZE * SZ_1M)
+#define MODULES_VADDR	(MODULES_END - MODULES_SIZE)
 
 #ifndef __ASSEMBLY__
 #include <linux/sched.h>

arch/powerpc/include/asm/book3s/64/hash-4k.h

@@ -74,6 +74,26 @@
 #define remap_4k_pfn(vma, addr, pfn, prot)	\
 	remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot))
 
+/*
+ * With 4K page size the real_pte machinery is all nops.
+ */
+#define __real_pte(e, p, o)		((real_pte_t){(e)})
+#define __rpte_to_pte(r)	((r).pte)
+#define __rpte_to_hidx(r,index)	(pte_val(__rpte_to_pte(r)) >> H_PAGE_F_GIX_SHIFT)
+
+#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift)       \
+	do {							         \
+		index = 0;					         \
+		shift = mmu_psize_defs[psize].shift;		         \
+
+#define pte_iterate_hashed_end() } while(0)
+
+/*
+ * We expect this to be called only for user addresses or kernel virtual
+ * addresses other than the linear mapping.
+ */
+#define pte_pagesize_index(mm, addr, pte)	MMU_PAGE_4K
+
 /*
  * 4K PTE format is different from 64K PTE format. Saving the hash_slot is just
  * a matter of returning the PTE bits that need to be modified. On 64K PTE,

arch/powerpc/include/asm/book3s/64/pgtable.h

@@ -330,32 +330,6 @@ static inline unsigned long pud_leaf_size(pud_t pud)
 
 #ifndef __ASSEMBLY__
 
-/*
- * This is the default implementation of various PTE accessors, it's
- * used in all cases except Book3S with 64K pages where we have a
- * concept of sub-pages
- */
-#ifndef __real_pte
-
-#define __real_pte(e, p, o)		((real_pte_t){(e)})
-#define __rpte_to_pte(r)	((r).pte)
-#define __rpte_to_hidx(r,index)	(pte_val(__rpte_to_pte(r)) >> H_PAGE_F_GIX_SHIFT)
-
-#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift)       \
-	do {							         \
-		index = 0;					         \
-		shift = mmu_psize_defs[psize].shift;		         \
-
-#define pte_iterate_hashed_end() } while(0)
-
-/*
- * We expect this to be called only for user addresses or kernel virtual
- * addresses other than the linear mapping.
- */
-#define pte_pagesize_index(mm, addr, pte)	MMU_PAGE_4K
-
-#endif /* __real_pte */
-
 static inline unsigned long pte_update(struct mm_struct *mm, unsigned long addr,
 				       pte_t *ptep, unsigned long clr,
 				       unsigned long set, int huge)

arch/powerpc/include/asm/code-patching.h

@@ -76,6 +76,43 @@ int patch_instruction(u32 *addr, ppc_inst_t instr);
 int raw_patch_instruction(u32 *addr, ppc_inst_t instr);
 int patch_instructions(u32 *addr, u32 *code, size_t len, bool repeat_instr);
 
+/*
+ * The data patching functions patch_uint() and patch_ulong(), etc., must be
+ * called on aligned addresses.
+ *
+ * The instruction patching functions patch_instruction() and similar must be
+ * called on addresses satisfying instruction alignment requirements.
+ */
+
+#ifdef CONFIG_PPC64
+
+int patch_uint(void *addr, unsigned int val);
+int patch_ulong(void *addr, unsigned long val);
+
+#define patch_u64 patch_ulong
+
+#else
+
+static inline int patch_uint(void *addr, unsigned int val)
+{
+	if (!IS_ALIGNED((unsigned long)addr, sizeof(unsigned int)))
+		return -EINVAL;
+
+	return patch_instruction(addr, ppc_inst(val));
+}
+
+static inline int patch_ulong(void *addr, unsigned long val)
+{
+	if (!IS_ALIGNED((unsigned long)addr, sizeof(unsigned long)))
+		return -EINVAL;
+
+	return patch_instruction(addr, ppc_inst(val));
+}
+
+#endif
+
+#define patch_u32 patch_uint
+
 static inline unsigned long patch_site_addr(s32 *site)
 {
 	return (unsigned long)site + *site;

arch/powerpc/include/asm/eeh.h

@@ -308,6 +308,7 @@ int eeh_pe_reset(struct eeh_pe *pe, int option, bool include_passed);
 int eeh_pe_configure(struct eeh_pe *pe);
 int eeh_pe_inject_err(struct eeh_pe *pe, int type, int func,
 		      unsigned long addr, unsigned long mask);
+int eeh_pe_inject_mmio_error(struct pci_dev *pdev);
 
 /**
  * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.

arch/powerpc/include/asm/mmu_context.h

@@ -116,9 +116,6 @@ static inline bool need_extra_context(struct mm_struct *mm, unsigned long ea)
 }
 #endif
 
-extern int use_cop(unsigned long acop, struct mm_struct *mm);
-extern void drop_cop(unsigned long acop, struct mm_struct *mm);
-
 #ifdef CONFIG_PPC_BOOK3S_64
 static inline void inc_mm_active_cpus(struct mm_struct *mm)
 {

arch/powerpc/include/asm/nohash/32/mmu-8xx.h

@@ -170,8 +170,9 @@
 
 #define mmu_linear_psize	MMU_PAGE_8M
 
-#define MODULES_VADDR	(PAGE_OFFSET - SZ_256M)
 #define MODULES_END	PAGE_OFFSET
+#define MODULES_SIZE	(CONFIG_MODULES_SIZE * SZ_1M)
+#define MODULES_VADDR	(MODULES_END - MODULES_SIZE)
 
 #ifndef __ASSEMBLY__
 

arch/powerpc/include/asm/nohash/pgalloc.h

@@ -19,8 +19,14 @@ static inline void tlb_flush_pgtable(struct mmu_gather *tlb,
 
 static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 {
-	return kmem_cache_alloc(PGT_CACHE(PGD_INDEX_SIZE),
+	pgd_t *pgd = kmem_cache_alloc(PGT_CACHE(PGD_INDEX_SIZE),
 			pgtable_gfp_flags(mm, GFP_KERNEL));
+
+#if defined(CONFIG_PPC_8xx) || defined(CONFIG_PPC_BOOK3S_603)
+	memcpy(pgd + USER_PTRS_PER_PGD, swapper_pg_dir + USER_PTRS_PER_PGD,
+	       (MAX_PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+#endif
+	return pgd;
 }
 
 static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)

arch/powerpc/include/asm/percpu.h

@@ -23,7 +23,7 @@ DECLARE_STATIC_KEY_FALSE(__percpu_first_chunk_is_paged);
 		(static_key_enabled(&__percpu_first_chunk_is_paged.key))
 #else
 #define percpu_first_chunk_is_paged	false
-#endif /* CONFIG_PPC64 && CONFIG_SMP */
+#endif
 
 #include <asm-generic/percpu.h>
 

arch/powerpc/include/asm/rtas.h

@@ -397,6 +397,7 @@ inline uint16_t pseries_errorlog_length(struct pseries_errorlog *sect)
 #define PSERIES_HP_ELOG_RESOURCE_SLOT	3
 #define PSERIES_HP_ELOG_RESOURCE_PHB	4
 #define PSERIES_HP_ELOG_RESOURCE_PMEM   6
+#define PSERIES_HP_ELOG_RESOURCE_DT	7
 
 #define PSERIES_HP_ELOG_ACTION_ADD	1
 #define PSERIES_HP_ELOG_ACTION_REMOVE	2

arch/powerpc/include/asm/thread_info.h

@@ -226,6 +226,10 @@ static inline int arch_within_stack_frames(const void * const stack,
 	return BAD_STACK;
 }
 
+#ifdef CONFIG_PPC32
+extern void *emergency_ctx[];
+#endif
+
 #endif	/* !__ASSEMBLY__ */
 
 #endif /* __KERNEL__ */

arch/powerpc/include/asm/uaccess.h

@@ -6,6 +6,7 @@
 #include <asm/page.h>
 #include <asm/extable.h>
 #include <asm/kup.h>
+#include <asm/asm-compat.h>
 
 #ifdef __powerpc64__
 /* We use TASK_SIZE_USER64 as TASK_SIZE is not constant */
@@ -92,12 +93,6 @@ __pu_failed:							\
 		: label)
 #endif
 
-#ifdef CONFIG_CC_IS_CLANG
-#define DS_FORM_CONSTRAINT "Z<>"
-#else
-#define DS_FORM_CONSTRAINT "YZ<>"
-#endif
-
 #ifdef __powerpc64__
 #ifdef CONFIG_PPC_KERNEL_PREFIXED
 #define __put_user_asm2_goto(x, ptr, label)			\