Merge tag 'omap-for-v4.9/dt-pt1-signed' of git://git.kernel.org/pub/s…

…cm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "DTS related changes for omaps for v4.9 merge window" from Tony Lindgren:

- Update elm phandle for am335x

- Fix overo NAND gpmc ranges, this has always been broken so it can
  wait for the merge window

- Fix NAND and use NAND ready pin for logicpd gpmc, this can wait too
  as it's been using the older configration since the dts got added

- A series of dtc warning fixes for unit names

- Keep dcdc3, 5 and 6 enabled during suspend on am347x boards

- Disable DDR regulator during rtc-only/poweroff mode for am437x boards

- Remove redundant regulator compatibles for am437x boards

- Increas QSPI max frequency for dra7 boards

- Enable QSPI for am57xx-idk-common

- Enable am335x-wega audio support

- Workaround for i845 for dra7

- Update binding for logicpd boards

- Add gpio-decoder nodes for am335x-icev2 board

- Add linux,pci-domain property for dra7

- Fix dra7 clock data gmac_gmii_ref_clk_div and related clock tree
  entries, these can wait for merge window as Ethernet works on dra7

- A series of changes to drop skeleton.dtsi because of dtc warnings

* tag 'omap-for-v4.9/dt-pt1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (54 commits)
  ARM: dts: dra7: Add missing unit name to memory nodes
  ARM: dts: dra62x: Add missing unit name to memory nodes
  ARM: dts: dm8168: Add missing unit name to memory nodes
  ARM: dts: dm8148: Add missing unit name to memory nodes
  ARM: dts: am572x: Add missing unit name to memory nodes
  ARM: dts: am4372: Add missing unit name to memory nodes
  ARM: dts: am3517: Add missing unit name to memory nodes
  ARM: dts: am335x: Add missing unit name to memory nodes
  ARM: dts: omap5: Add missing unit name to memory nodes
  ARM: dts: omap4: Add missing unit name to memory nodes
  ARM: dts: omap3: Add missing unit name to memory nodes
  ARM: dts: omap2: Add missing unit name to memory nodes
  ARM: dts: am4372: Remove skeleton.dtsi usage
  ARM: dts: dra7: Remove skeleton.dtsi usage
  ARM: dts: dm816x: Remove skeleton.dtsi usage
  ARM: dts: dm814x: Remove skeleton.dtsi usage
  ARM: dts: am33xx: Remove skeleton.dtsi usage
  ARM: dts: omap5: Remove skeleton.dtsi usage
  ARM: dts: omap4: Remove skeleton.dtsi usage
  ARM: dts: omap3: Remove skeleton.dtsi usage
  ...

Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -180,3 +180,9 @@ Boards:
 
 - DRA722 EVM: Software Development Board for DRA722
   compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7"
+
+- DM3730 Logic PD Torpedo + Wireless: Commercial System on Module with WiFi and Bluetooth
+  compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3"
+
+- DM3730 Logic PD SOM-LV: Commercial System on Module with WiFi and Bluetooth
+  compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3"

arch/arm/boot/dts/am335x-baltos.dtsi

@@ -24,20 +24,20 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		regulator-boot-on;
 	};
 
-	wl12xx_vmmc: fixedregulator@2 {
+	wl12xx_vmmc: fixedregulator2 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&wl12xx_gpio>;
 		compatible = "regulator-fixed";
@@ -226,7 +226,7 @@
 
 		#address-cells = <1>;
 		#size-cells = <1>;
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 	};
 };
 

arch/arm/boot/dts/am335x-base0033.dts

@@ -29,13 +29,13 @@
 
 		compatible = "gpio-leds";
 
-		led@0 {
+		led0 {
 			label = "base:red:user";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;	/* gpio1_21 */
 			default-state = "off";
 		};
 
-		led@1 {
+		led1 {
 			label = "base:green:user";
 			gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;	/* gpio2_0 */
 			default-state = "off";

arch/arm/boot/dts/am335x-bone-common.dtsi

@@ -13,7 +13,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
@@ -28,36 +28,36 @@
 
 		compatible = "gpio-leds";
 
-		led@2 {
+		led2 {
 			label = "beaglebone:green:heartbeat";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "beaglebone:green:mmc0";
 			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
-		led@4 {
+		led4 {
 			label = "beaglebone:green:usr2";
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "cpu0";
 			default-state = "off";
 		};
 
-		led@5 {
+		led5 {
 			label = "beaglebone:green:usr3";
 			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc1";
 			default-state = "off";
 		};
 	};
 
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;

arch/arm/boot/dts/am335x-chilisom.dtsi

@@ -19,7 +19,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};

arch/arm/boot/dts/am335x-cm-t335.dts

@@ -17,7 +17,7 @@
 	model = "CompuLab CM-T335";
 	compatible = "compulab,cm-t335", "ti,am33xx";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x8000000>;	/* 128 MB */
 	};
@@ -26,23 +26,23 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_led_pins>;
-		led@0 {
+		led0 {
 			label = "cm_t335:green";
 			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;	/* gpio2_0 */
 			linux,default-trigger = "heartbeat";
 		};
 	};
 
 	/* regulator for mmc */
-	vmmc_fixed: fixedregulator@0 {
+	vmmc_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc_fixed";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
 	/* Regulator for WiFi */
-	vwlan_fixed: fixedregulator@2 {
+	vwlan_fixed: fixedregulator2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vwlan_fixed";
 		gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */

arch/arm/boot/dts/am335x-evm.dts

@@ -20,26 +20,26 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		regulator-boot-on;
 	};
 
-	lis3_reg: fixedregulator@1 {
+	lis3_reg: fixedregulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "lis3_reg";
 		regulator-boot-on;
 	};
 
-	wlan_en_reg: fixedregulator@2 {
+	wlan_en_reg: fixedregulator2 {
 		compatible = "regulator-fixed";
 		regulator-name = "wlan-en-regulator";
 		regulator-min-microvolt = <1800000>;
@@ -53,7 +53,7 @@
 		enable-active-high;
 	};
 
-	matrix_keypad: matrix_keypad@0 {
+	matrix_keypad: matrix_keypad0 {
 		compatible = "gpio-matrix-keypad";
 		debounce-delay-ms = <5>;
 		col-scan-delay-us = <2>;
@@ -73,20 +73,20 @@
 				0x0201006c>;	/* DOWN */
 	};
 
-	gpio_keys: volume_keys@0 {
+	gpio_keys: volume_keys0 {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		autorepeat;
 
-		switch@9 {
+		switch9 {
 			label = "volume-up";
 			linux,code = <115>;
 			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
 			wakeup-source;
 		};
 
-		switch@10 {
+		switch10 {
 			label = "volume-down";
 			linux,code = <114>;
 			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/am335x-evmsk.dts

@@ -27,26 +27,26 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		regulator-boot-on;
 	};
 
-	lis3_reg: fixedregulator@1 {
+	lis3_reg: fixedregulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "lis3_reg";
 		regulator-boot-on;
 	};
 
-	wl12xx_vmmc: fixedregulator@2 {
+	wl12xx_vmmc: fixedregulator2 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&wl12xx_gpio>;
 		compatible = "regulator-fixed";
@@ -58,7 +58,7 @@
 		enable-active-high;
 	};
 
-	vtt_fixed: fixedregulator@3 {
+	vtt_fixed: fixedregulator3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vtt";
 		regulator-min-microvolt = <1500000>;
@@ -75,58 +75,58 @@
 
 		compatible = "gpio-leds";
 
-		led@1 {
+		led1 {
 			label = "evmsk:green:usr0";
 			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "evmsk:green:usr1";
 			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "evmsk:green:mmc0";
 			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
-		led@4 {
+		led4 {
 			label = "evmsk:green:heartbeat";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 	};
 
-	gpio_buttons: gpio_buttons@0 {
+	gpio_buttons: gpio_buttons0 {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		switch@1 {
+		switch1 {
 			label = "button0";
 			linux,code = <0x100>;
 			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 		};
 
-		switch@2 {
+		switch2 {
 			label = "button1";
 			linux,code = <0x101>;
 			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		switch@3 {
+		switch3 {
 			label = "button2";
 			linux,code = <0x102>;
 			gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
 			wakeup-source;
 		};
 
-		switch@4 {
+		switch4 {
 			label = "button3";
 			linux,code = <0x103>;
 			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;