ASoC: codec: wm8960: Relax bit clock computation

WM8960 derives bit clock from sysclock using BCLKDIV[3:0] of R8
clocking register (See WM8960 datasheet, page 71).

There are use cases, like this:
aplay -Dhw:0,0 -r 48000 -c 1 -f S20_3LE -t raw audio48k20b_3LE1c.pcm

where no BCLKDIV applied to sysclock can give us the exact requested
bitclk, so driver fails to configure clocking and aplay fails to run.

Fix this by relaxing bitclk computation, so that when no exact value
can be derived from sysclk pick the closest value greater than
expected bitclk.

Suggested-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/codecs/wm8960.c

@@ -611,23 +611,31 @@ static const int bclk_divs[] = {
  *		- lrclk      = sysclk / dac_divs
  *		- 10 * bclk  = sysclk / bclk_divs
  *
+ *	If we cannot find an exact match for (sysclk, lrclk, bclk)
+ *	triplet, we relax the bclk such that bclk is chosen as the
+ *	closest available frequency greater than expected bclk.
+ *
  * @wm8960_priv: wm8960 codec private data
  * @mclk: MCLK used to derive sysclk
  * @sysclk_idx: sysclk_divs index for found sysclk
  * @dac_idx: dac_divs index for found lrclk
  * @bclk_idx: bclk_divs index for found bclk
  *
  * Returns:
- * -1, in case no sysclk frequency available found
- *  0, in case an exact (@sysclk_idx, @dac_idx, @bclk_idx) match is found
+ *  -1, in case no sysclk frequency available found
+ * >=0, in case we could derive bclk and lrclk from sysclk using
+ *      (@sysclk_idx, @dac_idx, @bclk_idx) dividers
  */
 static
 int wm8960_configure_sysclk(struct wm8960_priv *wm8960, int mclk,
 			    int *sysclk_idx, int *dac_idx, int *bclk_idx)
 {
 	int sysclk, bclk, lrclk;
 	int i, j, k;
-	int diff;
+	int diff, closest = mclk;
+
+	/* marker for no match */
+	*bclk_idx = -1;
 
 	bclk = wm8960->bclk;
 	lrclk = wm8960->lrclk;
@@ -648,18 +656,20 @@ int wm8960_configure_sysclk(struct wm8960_priv *wm8960, int mclk,
 					*bclk_idx = k;
 					break;
 				}
+				if (diff > 0 && closest > diff) {
+					*sysclk_idx = i;
+					*dac_idx = j;
+					*bclk_idx = k;
+					closest = diff;
+				}
 			}
 			if (k != ARRAY_SIZE(bclk_divs))
 				break;
 		}
 		if (j != ARRAY_SIZE(dac_divs))
 			break;
 	}
-
-	if (i != ARRAY_SIZE(sysclk_divs))
-		return 0;
-
-	return -1;
+	return *bclk_idx;
 }
 
 static int wm8960_configure_clocking(struct snd_soc_codec *codec)
@@ -703,7 +713,7 @@ static int wm8960_configure_clocking(struct snd_soc_codec *codec)
 
 	if (wm8960->clk_id != WM8960_SYSCLK_PLL) {
 		ret = wm8960_configure_sysclk(wm8960, freq_out, &i, &j, &k);
-		if (ret == 0) {
+		if (ret >= 0) {
 			goto configure_clock;
 		} else if (wm8960->clk_id != WM8960_SYSCLK_AUTO) {
 			dev_err(codec->dev, "failed to configure clock\n");