Merge tag 'irq-core-2020-01-28' of git://git.kernel.org/pub/scm/linux…

…/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "The interrupt departement provides:

   - A mechanism to shield isolated tasks from managed interrupts:

     The affinity of managed interrupts is completely controlled by the
     kernel and user space has no influence on them. The reason is that
     the automatically assigned affinity correlates to the multi-queue
     CPU handling of block devices.

     If the generated affinity mask spaws both housekeeping and isolated
     CPUs the interrupt could be routed to an isolated CPU which would
     then be disturbed by I/O submitted by a housekeeping CPU.

     The new mechamism ensures that as long as one housekeeping CPU is
     online in the assigned affinity mask the interrupt is routed to a
     housekeeping CPU.

     If there is no online housekeeping CPU in the affinity mask, then
     the interrupt is routed to an isolated CPU to keep the device queue
     intact, but unless the isolated CPU submits I/O by itself these
     interrupts are not raised.

   - A small addon to the device tree irqdomain core code to avoid
     duplication in irq chip drivers

   - Conversion of the SiFive PLIC to hierarchical domains

   - The usual pile of new irq chip drivers: SiFive GPIO, Aspeed SCI,
     NXP INTMUX, Meson A1 GPIO

   - The first cut of support for the new ARM GICv4.1

   - The usual pile of fixes and improvements in core and driver code"

* tag 'irq-core-2020-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
  genirq, sched/isolation: Isolate from handling managed interrupts
  irqchip/gic-v4.1: Allow direct invalidation of VLPIs
  irqchip/gic-v4.1: Suppress per-VLPI doorbell
  irqchip/gic-v4.1: Add VPE INVALL callback
  irqchip/gic-v4.1: Add VPE eviction callback
  irqchip/gic-v4.1: Add VPE residency callback
  irqchip/gic-v4.1: Add mask/unmask doorbell callbacks
  irqchip/gic-v4.1: Plumb skeletal VPE irqchip
  irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP
  irqchip/gic-v4.1: Don't use the VPE proxy if RVPEID is set
  irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP
  irqchip/gic-v4.1: VPE table (aka GICR_VPROPBASER) allocation
  irqchip/gic-v3: Add GICv4.1 VPEID size discovery
  irqchip/gic-v3: Detect GICv4.1 supporting RVPEID
  irqchip/gic-v3-its: Fix get_vlpi_map() breakage with doorbells
  irqdomain: Fix a memory leak in irq_domain_push_irq()
  irqchip: Add NXP INTMUX interrupt multiplexer support
  dt-bindings: interrupt-controller: Add binding for NXP INTMUX interrupt multiplexer
  irqchip: Define EXYNOS_IRQ_COMBINER
  irqchip/meson-gpio: Add support for meson a1 SoCs
  ...

Documentation/admin-guide/kernel-parameters.txt

@@ -1934,9 +1934,31 @@
 			  <cpu number> begins at 0 and the maximum value is
 			  "number of CPUs in system - 1".
 
-			The format of <cpu-list> is described above.
-
+			managed_irq
+
+			  Isolate from being targeted by managed interrupts
+			  which have an interrupt mask containing isolated
+			  CPUs. The affinity of managed interrupts is
+			  handled by the kernel and cannot be changed via
+			  the /proc/irq/* interfaces.
+
+			  This isolation is best effort and only effective
+			  if the automatically assigned interrupt mask of a
+			  device queue contains isolated and housekeeping
+			  CPUs. If housekeeping CPUs are online then such
+			  interrupts are directed to the housekeeping CPU
+			  so that IO submitted on the housekeeping CPU
+			  cannot disturb the isolated CPU.
+
+			  If a queue's affinity mask contains only isolated
+			  CPUs then this parameter has no effect on the
+			  interrupt routing decision, though interrupts are
+			  only delivered when tasks running on those
+			  isolated CPUs submit IO. IO submitted on
+			  housekeeping CPUs has no influence on those
+			  queues.
 
+			The format of <cpu-list> is described above.
 
 	iucv=		[HW,NET]
 

Documentation/devicetree/bindings/gpio/sifive,gpio.yaml

@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/sifive,gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive GPIO controller
+
+maintainers:
+  - Yash Shah <yash.shah@sifive.com>
+  - Paul Walmsley <paul.walmsley@sifive.com>
+
+properties:
+  compatible:
+    items:
+      - const: sifive,fu540-c000-gpio
+      - const: sifive,gpio0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      interrupt mapping one per GPIO. Maximum 16 GPIOs.
+    minItems: 1
+    maxItems: 16
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - clocks
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/clock/sifive-fu540-prci.h>
+      gpio@10060000 {
+        compatible = "sifive,fu540-c000-gpio", "sifive,gpio0";
+        interrupt-parent = <&plic>;
+        interrupts = <7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22>;
+        reg = <0x0 0x10060000 0x0 0x1000>;
+        clocks = <&tlclk PRCI_CLK_TLCLK>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+      };
+
+...

Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt

@@ -17,6 +17,7 @@ Required properties:
     "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X)
     "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2)
     "amlogic,meson-sm1-gpio-intc" for SM1 SoCs (S905D3, S905X3, S905Y3)
+    "amlogic,meson-a1-gpio-intc" for A1 SoCs (A113L)
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller.
 - #interrupt-cells : Specifies the number of cells needed to encode an

Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt

@@ -0,0 +1,23 @@
+Aspeed AST25XX and AST26XX SCU Interrupt Controller
+
+Required Properties:
+ - #interrupt-cells		: must be 1
+ - compatible			: must be "aspeed,ast2500-scu-ic",
+				  "aspeed,ast2600-scu-ic0" or
+				  "aspeed,ast2600-scu-ic1"
+ - interrupts			: interrupt from the parent controller
+ - interrupt-controller		: indicates that the controller receives and
+				  fires new interrupts for child busses
+
+Example:
+
+    syscon@1e6e2000 {
+        ranges = <0 0x1e6e2000 0x1a8>;
+
+        scu_ic: interrupt-controller@18 {
+            #interrupt-cells = <1>;
+            compatible = "aspeed,ast2500-scu-ic";
+            interrupts = <21>;
+            interrupt-controller;
+        };
+    };

Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml

@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,intmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale INTMUX interrupt multiplexer
+
+maintainers:
+  - Joakim Zhang <qiangqing.zhang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx-intmux
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+    description: |
+      Should contain the parent interrupt lines (up to 8) used to multiplex
+      the input interrupts.
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description: |
+      The 1st cell is hw interrupt number, the 2nd cell is channel index.
+
+  clocks:
+    description: ipg clock.
+
+  clock-names:
+    const: ipg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@37400000 {
+        compatible = "fsl,imx-intmux";
+        reg = <0x37400000 0x1000>;
+        interrupts = <0 16 4>,
+                     <0 17 4>,
+                     <0 18 4>,
+                     <0 19 4>,
+                     <0 20 4>,
+                     <0 21 4>,
+                     <0 22 4>,
+                     <0 23 4>;
+        interrupt-controller;
+        interrupt-parent = <&gic>;
+        #interrupt-cells = <2>;
+        clocks = <&clk>;
+        clock-names = "ipg";
+    };

MAINTAINERS

@@ -2704,6 +2704,14 @@ S:	Maintained
 F:	drivers/pinctrl/aspeed/
 F:	Documentation/devicetree/bindings/pinctrl/aspeed,*
 
+ASPEED SCU INTERRUPT CONTROLLER DRIVER
+M:	Eddie James <eajames@linux.ibm.com>
+L:	linux-aspeed@lists.ozlabs.org (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt
+F:	drivers/irqchip/irq-aspeed-scu-ic.c
+F:	include/dt-bindings/interrupt-controller/aspeed-scu-ic.h
+
 ASPEED VIDEO ENGINE DRIVER
 M:	Eddie James <eajames@linux.ibm.com>
 L:	linux-media@vger.kernel.org

arch/arm/include/asm/arch_gicv3.h

@@ -10,6 +10,7 @@
 #ifndef __ASSEMBLY__
 
 #include <linux/io.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
 #include <asm/barrier.h>
 #include <asm/cacheflush.h>
 #include <asm/cp15.h>
@@ -327,6 +328,7 @@ static inline u64 __gic_readq_nonatomic(const volatile void __iomem *addr)
 /*
  * GITS_VPROPBASER - hi and lo bits may be accessed independently.
  */
+#define gits_read_vpropbaser(c)		__gic_readq_nonatomic(c)
 #define gits_write_vpropbaser(v, c)	__gic_writeq_nonatomic(v, c)
 
 /*

arch/arm/mach-exynos/Kconfig

@@ -12,6 +12,7 @@ menuconfig ARCH_EXYNOS
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
+	select EXYNOS_IRQ_COMBINER
 	select COMMON_CLK_SAMSUNG
 	select EXYNOS_ASV
 	select EXYNOS_CHIPID

arch/arm64/include/asm/arch_gicv3.h

@@ -141,6 +141,7 @@ static inline u32 gic_read_rpr(void)
 #define gicr_read_pendbaser(c)		readq_relaxed(c)
 
 #define gits_write_vpropbaser(v, c)	writeq_relaxed(v, c)
+#define gits_read_vpropbaser(c)		readq_relaxed(c)
 
 #define gits_write_vpendbaser(v, c)	writeq_relaxed(v, c)
 #define gits_read_vpendbaser(c)		readq_relaxed(c)

drivers/gpio/Kconfig

@@ -479,6 +479,15 @@ config GPIO_SAMA5D2_PIOBU
 	  The difference from regular GPIOs is that they
 	  maintain their value during backup/self-refresh.
 
+config GPIO_SIFIVE
+	bool "SiFive GPIO support"
+	depends on OF_GPIO && IRQ_DOMAIN_HIERARCHY
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	select REGMAP_MMIO
+	help
+	  Say yes here to support the GPIO device on SiFive SoCs.
+
 config GPIO_SIOX
 	tristate "SIOX GPIO support"
 	depends on SIOX

drivers/gpio/Makefile

@@ -124,6 +124,7 @@ obj-$(CONFIG_ARCH_SA1100)		+= gpio-sa1100.o
 obj-$(CONFIG_GPIO_SAMA5D2_PIOBU)	+= gpio-sama5d2-piobu.o
 obj-$(CONFIG_GPIO_SCH311X)		+= gpio-sch311x.o
 obj-$(CONFIG_GPIO_SCH)			+= gpio-sch.o
+obj-$(CONFIG_GPIO_SIFIVE)		+= gpio-sifive.o
 obj-$(CONFIG_GPIO_SIOX)			+= gpio-siox.o
 obj-$(CONFIG_GPIO_SODAVILLE)		+= gpio-sodaville.o
 obj-$(CONFIG_GPIO_SPEAR_SPICS)		+= gpio-spear-spics.o