net/mlx5e: Use PARTIAL_GSO for UDP segmentation

This patch removes the splitting of UDP_GSO_L4 packets in the driver,
and exposes UDP_GSO_L4 as a PARTIAL_GSO feature. Thus, the network stack
is not responsible for splitting the packet into two.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

drivers/net/ethernet/mellanox/mlx5/core/Makefile

@@ -14,8 +14,8 @@ mlx5_core-$(CONFIG_MLX5_FPGA) += fpga/cmd.o fpga/core.o fpga/conn.o fpga/sdk.o \
 		fpga/ipsec.o fpga/tls.o
 
 mlx5_core-$(CONFIG_MLX5_CORE_EN) += en_main.o en_common.o en_fs.o en_ethtool.o \
-		en_tx.o en_rx.o en_dim.o en_txrx.o en_accel/rxtx.o en_stats.o  \
-		vxlan.o en_arfs.o en_fs_ethtool.o en_selftest.o en/port.o
+		en_tx.o en_rx.o en_dim.o en_txrx.o en_stats.o vxlan.o          \
+		en_arfs.o en_fs_ethtool.o en_selftest.o en/port.o
 
 mlx5_core-$(CONFIG_MLX5_MPFS) += lib/mpfs.o
 

drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h

@@ -38,14 +38,22 @@
 #include <linux/netdevice.h>
 #include "en_accel/ipsec_rxtx.h"
 #include "en_accel/tls_rxtx.h"
-#include "en_accel/rxtx.h"
 #include "en.h"
 
-static inline struct sk_buff *mlx5e_accel_handle_tx(struct sk_buff *skb,
-						    struct mlx5e_txqsq *sq,
-						    struct net_device *dev,
-						    struct mlx5e_tx_wqe **wqe,
-						    u16 *pi)
+static inline void
+mlx5e_udp_gso_handle_tx_skb(struct sk_buff *skb)
+{
+	int payload_len = skb_shinfo(skb)->gso_size + sizeof(struct udphdr);
+
+	udp_hdr(skb)->len = htons(payload_len);
+}
+
+static inline struct sk_buff *
+mlx5e_accel_handle_tx(struct sk_buff *skb,
+		      struct mlx5e_txqsq *sq,
+		      struct net_device *dev,
+		      struct mlx5e_tx_wqe **wqe,
+		      u16 *pi)
 {
 #ifdef CONFIG_MLX5_EN_TLS
 	if (test_bit(MLX5E_SQ_STATE_TLS, &sq->state)) {
@@ -63,11 +71,8 @@ static inline struct sk_buff *mlx5e_accel_handle_tx(struct sk_buff *skb,
 	}
 #endif
 
-	if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4) {
-		skb = mlx5e_udp_gso_handle_tx_skb(dev, sq, skb, wqe, pi);
-		if (unlikely(!skb))
-			return NULL;
-	}
+	if (skb_is_gso(skb) && skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4)
+		mlx5e_udp_gso_handle_tx_skb(skb);
 
 	return skb;
 }

drivers/net/ethernet/mellanox/mlx5/core/en_main.c

@@ -4538,7 +4538,6 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev)
 	netdev->hw_features      |= NETIF_F_HW_VLAN_STAG_TX;
 
 	if (mlx5e_vxlan_allowed(mdev) || MLX5_CAP_ETH(mdev, tunnel_stateless_gre)) {
-		netdev->hw_features     |= NETIF_F_GSO_PARTIAL;
 		netdev->hw_enc_features |= NETIF_F_IP_CSUM;
 		netdev->hw_enc_features |= NETIF_F_IPV6_CSUM;
 		netdev->hw_enc_features |= NETIF_F_TSO;
@@ -4563,6 +4562,11 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev)
 						NETIF_F_GSO_GRE_CSUM;
 	}
 
+	netdev->hw_features	                 |= NETIF_F_GSO_PARTIAL;
+	netdev->gso_partial_features             |= NETIF_F_GSO_UDP_L4;
+	netdev->hw_features                      |= NETIF_F_GSO_UDP_L4;
+	netdev->features                         |= NETIF_F_GSO_UDP_L4;
+
 	mlx5_query_port_fcs(mdev, &fcs_supported, &fcs_enabled);
 
 	if (fcs_supported)
@@ -4595,9 +4599,6 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev)
 	netdev->features         |= NETIF_F_HIGHDMA;
 	netdev->features         |= NETIF_F_HW_VLAN_STAG_FILTER;
 
-	netdev->features         |= NETIF_F_GSO_UDP_L4;
-	netdev->hw_features      |= NETIF_F_GSO_UDP_L4;
-
 	netdev->priv_flags       |= IFF_UNICAST_FLT;
 
 	mlx5e_set_netdev_dev_addr(netdev);