Merge remote-tracking branches 'asoc/topic/tas6424', 'asoc/topic/tfa9…

…879', 'asoc/topic/tlv320aic31xx', 'asoc/topic/tlv320aic32x4' and 'asoc/topic/tlv320aic3x' into asoc-next

Documentation/devicetree/bindings/sound/tfa9879.txt

@@ -6,18 +6,18 @@ Required properties:
 
 - reg : the I2C address of the device
 
+- #sound-dai-cells : must be 0.
+
 Example:
 
 &i2c1 {
-	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
 
-	codec: tfa9879@6c {
+	amp: amp@6c {
 		#sound-dai-cells = <0>;
 		compatible = "nxp,tfa9879";
 		reg = <0x6c>;
-        };
+	};
 };
 

Documentation/devicetree/bindings/sound/ti,tas6424.txt

@@ -0,0 +1,20 @@
+Texas Instruments TAS6424 Quad-Channel Audio amplifier
+
+The TAS6424 serial control bus communicates through I2C protocols.
+
+Required properties:
+	- compatible: "ti,tas6424" - TAS6424
+	- reg: I2C slave address
+	- sound-dai-cells: must be equal to 0
+
+Example:
+
+tas6424: tas6424@6a {
+	compatible = "ti,tas6424";
+	reg = <0x6a>;
+
+	#sound-dai-cells = <0>;
+};
+
+For more product information please see the link below:
+http://www.ti.com/product/TAS6424-Q1

Documentation/devicetree/bindings/sound/tlv320aic31xx.txt

@@ -22,14 +22,18 @@ Required properties:
 
 Optional properties:
 
-- gpio-reset - gpio pin number used for codec reset
+- reset-gpios - GPIO specification for the active low RESET input.
 - ai31xx-micbias-vg - MicBias Voltage setting
         1 or MICBIAS_2_0V - MICBIAS output is powered to 2.0V
         2 or MICBIAS_2_5V - MICBIAS output is powered to 2.5V
         3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD
 	If this node is not mentioned or if the value is unknown, then
 	micbias	is set to 2.0V.
 
+Deprecated properties:
+
+- gpio-reset - gpio pin number used for codec reset
+
 CODEC output pins:
   * HPL
   * HPR
@@ -48,6 +52,7 @@ CODEC input pins:
 The pins can be used in referring sound node's audio-routing property.
 
 Example:
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/sound/tlv320aic31xx-micbias.h>
 
 tlv320aic31xx: tlv320aic31xx@18 {
@@ -56,6 +61,8 @@ tlv320aic31xx: tlv320aic31xx@18 {
 
 	ai31xx-micbias-vg = <MICBIAS_OFF>;
 
+	reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+
 	HPVDD-supply = <&regulator>;
 	SPRVDD-supply = <&regulator>;
 	SPLVDD-supply = <&regulator>;

Documentation/devicetree/bindings/sound/tlv320aic3x.txt

@@ -17,7 +17,7 @@ Required properties:
 
 Optional properties:
 
-- gpio-reset - gpio pin number used for codec reset
+- reset-gpios - GPIO specification for the active low RESET input.
 - ai3x-gpio-func - <array of 2 int> - AIC3X_GPIO1 & AIC3X_GPIO2 Functionality
 				    - Not supported on tlv320aic3104
 - ai3x-micbias-vg - MicBias Voltage required.
@@ -34,6 +34,10 @@ Optional properties:
 - AVDD-supply, IOVDD-supply, DRVDD-supply, DVDD-supply : power supplies for the
   device as covered in Documentation/devicetree/bindings/regulator/regulator.txt
 
+Deprecated properties:
+
+- gpio-reset - gpio pin number used for codec reset
+
 CODEC output pins:
   * LLOUT
   * RLOUT
@@ -61,10 +65,14 @@ The pins can be used in referring sound node's audio-routing property.
 
 Example:
 
+#include <dt-bindings/gpio/gpio.h>
+
 tlv320aic3x: tlv320aic3x@1b {
 	compatible = "ti,tlv320aic3x";
 	reg = <0x1b>;
 
+	reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+
 	AVDD-supply = <&regulator>;
 	IOVDD-supply = <&regulator>;
 	DRVDD-supply = <&regulator>;

MAINTAINERS

@@ -9803,6 +9803,7 @@ NXP TFA9879 DRIVER
 M:	Peter Rosin <peda@axentia.se>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Maintained
+F:	Documentation/devicetree/bindings/sound/tfa9879.txt
 F:	sound/soc/codecs/tfa9879*
 
 NXP-NCI NFC DRIVER

sound/soc/codecs/Kconfig

@@ -150,6 +150,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_TAS5086 if I2C
 	select SND_SOC_TAS571X if I2C
 	select SND_SOC_TAS5720 if I2C
+	select SND_SOC_TAS6424 if I2C
 	select SND_SOC_TFA9879 if I2C
 	select SND_SOC_TLV320AIC23_I2C if I2C
 	select SND_SOC_TLV320AIC23_SPI if SPI_MASTER
@@ -901,6 +902,13 @@ config SND_SOC_TAS5720
 	  Enable support for Texas Instruments TAS5720L/M high-efficiency mono
 	  Class-D audio power amplifiers.
 
+config SND_SOC_TAS6424
+	tristate "Texas Instruments TAS6424 Quad-Channel Audio amplifier"
+	depends on I2C
+	help
+	  Enable support for Texas Instruments TAS6424 high-efficiency
+	  digital input quad-channel Class-D audio power amplifiers.
+
 config SND_SOC_TFA9879
 	tristate "NXP Semiconductors TFA9879 amplifier"
 	depends on I2C
@@ -931,12 +939,12 @@ config SND_SOC_TLV320AIC32X4
 	tristate
 
 config SND_SOC_TLV320AIC32X4_I2C
-	tristate
+	tristate "Texas Instruments TLV320AIC32x4 audio CODECs - I2C"
 	depends on I2C
 	select SND_SOC_TLV320AIC32X4
 
 config SND_SOC_TLV320AIC32X4_SPI
-	tristate
+	tristate "Texas Instruments TLV320AIC32x4 audio CODECs - SPI"
 	depends on SPI_MASTER
 	select SND_SOC_TLV320AIC32X4
 

sound/soc/codecs/Makefile

@@ -159,6 +159,7 @@ snd-soc-sti-sas-objs := sti-sas.o
 snd-soc-tas5086-objs := tas5086.o
 snd-soc-tas571x-objs := tas571x.o
 snd-soc-tas5720-objs := tas5720.o
+snd-soc-tas6424-objs := tas6424.o
 snd-soc-tfa9879-objs := tfa9879.o
 snd-soc-tlv320aic23-objs := tlv320aic23.o
 snd-soc-tlv320aic23-i2c-objs := tlv320aic23-i2c.o
@@ -402,6 +403,7 @@ obj-$(CONFIG_SND_SOC_TAS2552)	+= snd-soc-tas2552.o
 obj-$(CONFIG_SND_SOC_TAS5086)	+= snd-soc-tas5086.o
 obj-$(CONFIG_SND_SOC_TAS571X)	+= snd-soc-tas571x.o
 obj-$(CONFIG_SND_SOC_TAS5720)	+= snd-soc-tas5720.o
+obj-$(CONFIG_SND_SOC_TAS6424)	+= snd-soc-tas6424.o
 obj-$(CONFIG_SND_SOC_TFA9879)	+= snd-soc-tfa9879.o
 obj-$(CONFIG_SND_SOC_TLV320AIC23)	+= snd-soc-tlv320aic23.o
 obj-$(CONFIG_SND_SOC_TLV320AIC23_I2C)	+= snd-soc-tlv320aic23-i2c.o