Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits)
  MAINTAINERS: Add Andy Gospodarek as co-maintainer.
  r8169: disable ASPM
  RxRPC: Fix v1 keys
  AF_RXRPC: Handle receiving ACKALL packets
  cnic: Fix lost interrupt on bnx2x
  cnic: Prevent status block race conditions with hardware
  net: dcbnl: check correct ops in dcbnl_ieee_set()
  e1000e: disable broken PHY wakeup for ICH10 LOMs, use MAC wakeup instead
  igb: fix sparse warning
  e1000: fix sparse warning
  netfilter: nf_log: avoid oops in (un)bind with invalid nfproto values
  dccp: fix oops on Reset after close
  ipvs: fix dst_lock locking on dest update
  davinci_emac: Add Carrier Link OK check in Davinci RX Handler
  bnx2x: update driver version to 1.62.00-6
  bnx2x: properly calculate lro_mss
  bnx2x: perform statistics "action" before state transition.
  bnx2x: properly configure coefficients for MinBW algorithm (NPAR mode).
  bnx2x: Fix ethtool -t link test for MF (non-pmf) devices.
  bnx2x: Fix nvram test for single port devices.
  ...

Documentation/networking/00-INDEX

@@ -40,8 +40,6 @@ decnet.txt
 	- info on using the DECnet networking layer in Linux.
 depca.txt
 	- the Digital DEPCA/EtherWORKS DE1?? and DE2?? LANCE Ethernet driver
-dgrs.txt
-	- the Digi International RightSwitch SE-X Ethernet driver
 dmfe.txt
 	- info on the Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver.
 e100.txt
@@ -50,8 +48,6 @@ e1000.txt
 	- info on Intel's E1000 line of gigabit ethernet boards
 eql.txt
 	- serial IP load balancing
-ethertap.txt
-	- the Ethertap user space packet reception and transmission driver
 ewrk3.txt
 	- the Digital EtherWORKS 3 DE203/4/5 Ethernet driver
 filter.txt
@@ -104,8 +100,6 @@ tuntap.txt
 	- TUN/TAP device driver, allowing user space Rx/Tx of packets.
 vortex.txt
 	- info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards.
-wavelan.txt
-	- AT&T GIS (nee NCR) WaveLAN card: An Ethernet-like radio transceiver
 x25.txt
 	- general info on X.25 development.
 x25-iface.txt

MAINTAINERS

@@ -1467,6 +1467,7 @@ F:	include/net/bluetooth/
 
 BONDING DRIVER
 M:	Jay Vosburgh <fubar@us.ibm.com>
+M:	Andy Gospodarek <andy@greyhouse.net>
 L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/bonding/
 S:	Supported
@@ -2033,7 +2034,7 @@ F:	Documentation/scsi/dc395x.txt
 F:	drivers/scsi/dc395x.*
 
 DCCP PROTOCOL
-M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
+M:	Gerrit Renker <gerrit@erg.abdn.ac.uk>
 L:	dccp@vger.kernel.org
 W:	http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp
 S:	Maintained

drivers/isdn/hardware/eicon/istream.c

@@ -62,7 +62,7 @@ void diva_xdi_provide_istream_info (ADAPTER* a,
   stream interface.
   If synchronous service was requested, then function
   does return amount of data written to stream.
-  'final' does indicate that pice of data to be written is
+  'final' does indicate that piece of data to be written is
   final part of frame (necessary only by structured datatransfer)
   return  0 if zero lengh packet was written
   return -1 if stream is full

drivers/net/bnx2x/bnx2x.h

@@ -22,7 +22,7 @@
  * (you will need to reboot afterwards) */
 /* #define BNX2X_STOP_ON_ERROR */
 
-#define DRV_MODULE_VERSION      "1.62.00-5"
+#define DRV_MODULE_VERSION      "1.62.00-6"
 #define DRV_MODULE_RELDATE      "2011/01/30"
 #define BNX2X_BC_VER            0x040200
 
@@ -1613,19 +1613,23 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
 #define BNX2X_BTR			4
 #define MAX_SPQ_PENDING			8
 
-
-/* CMNG constants
-   derived from lab experiments, and not from system spec calculations !!! */
-#define DEF_MIN_RATE			100
+/* CMNG constants, as derived from system spec calculations */
+/* default MIN rate in case VNIC min rate is configured to zero - 100Mbps */
+#define DEF_MIN_RATE					100
 /* resolution of the rate shaping timer - 100 usec */
-#define RS_PERIODIC_TIMEOUT_USEC	100
-/* resolution of fairness algorithm in usecs -
-   coefficient for calculating the actual t fair */
-#define T_FAIR_COEF			10000000
+#define RS_PERIODIC_TIMEOUT_USEC			100
 /* number of bytes in single QM arbitration cycle -
-   coefficient for calculating the fairness timer */
-#define QM_ARB_BYTES			40000
-#define FAIR_MEM			2
+ * coefficient for calculating the fairness timer */
+#define QM_ARB_BYTES					160000
+/* resolution of Min algorithm 1:100 */
+#define MIN_RES						100
+/* how many bytes above threshold for the minimal credit of Min algorithm*/
+#define MIN_ABOVE_THRESH				32768
+/* Fairness algorithm integration time coefficient -
+ * for calculating the actual Tfair */
+#define T_FAIR_COEF	((MIN_ABOVE_THRESH +  QM_ARB_BYTES) * 8 * MIN_RES)
+/* Memory of fairness algorithm . 2 cycles */
+#define FAIR_MEM					2
 
 
 #define ATTN_NIG_FOR_FUNC		(1L << 8)

drivers/net/bnx2x/bnx2x_cmn.c

@@ -259,10 +259,44 @@ static void bnx2x_tpa_start(struct bnx2x_fastpath *fp, u16 queue,
 #endif
 }
 
+/* Timestamp option length allowed for TPA aggregation:
+ *
+ *		nop nop kind length echo val
+ */
+#define TPA_TSTAMP_OPT_LEN	12
+/**
+ * Calculate the approximate value of the MSS for this
+ * aggregation using the first packet of it.
+ *
+ * @param bp
+ * @param parsing_flags Parsing flags from the START CQE
+ * @param len_on_bd Total length of the first packet for the
+ *		     aggregation.
+ */
+static inline u16 bnx2x_set_lro_mss(struct bnx2x *bp, u16 parsing_flags,
+				    u16 len_on_bd)
+{
+	/* TPA arrgregation won't have an IP options and TCP options
+	 * other than timestamp.
+	 */
+	u16 hdrs_len = ETH_HLEN + sizeof(struct iphdr) + sizeof(struct tcphdr);
+
+
+	/* Check if there was a TCP timestamp, if there is it's will
+	 * always be 12 bytes length: nop nop kind length echo val.
+	 *
+	 * Otherwise FW would close the aggregation.
+	 */
+	if (parsing_flags & PARSING_FLAGS_TIME_STAMP_EXIST_FLAG)
+		hdrs_len += TPA_TSTAMP_OPT_LEN;
+
+	return len_on_bd - hdrs_len;
+}
+
 static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 			       struct sk_buff *skb,
 			       struct eth_fast_path_rx_cqe *fp_cqe,
-			       u16 cqe_idx)
+			       u16 cqe_idx, u16 parsing_flags)
 {
 	struct sw_rx_page *rx_pg, old_rx_pg;
 	u16 len_on_bd = le16_to_cpu(fp_cqe->len_on_bd);
@@ -275,8 +309,8 @@ static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 
 	/* This is needed in order to enable forwarding support */
 	if (frag_size)
-		skb_shinfo(skb)->gso_size = min((u32)SGE_PAGE_SIZE,
-					       max(frag_size, (u32)len_on_bd));
+		skb_shinfo(skb)->gso_size = bnx2x_set_lro_mss(bp, parsing_flags,
+							      len_on_bd);
 
 #ifdef BNX2X_STOP_ON_ERROR
 	if (pages > min_t(u32, 8, MAX_SKB_FRAGS)*SGE_PAGE_SIZE*PAGES_PER_SGE) {
@@ -344,6 +378,8 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 	if (likely(new_skb)) {
 		/* fix ip xsum and give it to the stack */
 		/* (no need to map the new skb) */
+		u16 parsing_flags =
+			le16_to_cpu(cqe->fast_path_cqe.pars_flags.flags);
 
 		prefetch(skb);
 		prefetch(((char *)(skb)) + L1_CACHE_BYTES);
@@ -373,9 +409,9 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 		}
 
 		if (!bnx2x_fill_frag_skb(bp, fp, skb,
-					 &cqe->fast_path_cqe, cqe_idx)) {
-			if ((le16_to_cpu(cqe->fast_path_cqe.
-			    pars_flags.flags) & PARSING_FLAGS_VLAN))
+					 &cqe->fast_path_cqe, cqe_idx,
+					 parsing_flags)) {
+			if (parsing_flags & PARSING_FLAGS_VLAN)
 				__vlan_hwaccel_put_tag(skb,
 						 le16_to_cpu(cqe->fast_path_cqe.
 							     vlan_tag));
@@ -703,19 +739,20 @@ u16 bnx2x_get_mf_speed(struct bnx2x *bp)
 {
 	u16 line_speed = bp->link_vars.line_speed;
 	if (IS_MF(bp)) {
-		u16 maxCfg = (bp->mf_config[BP_VN(bp)] &
-						FUNC_MF_CFG_MAX_BW_MASK) >>
-						FUNC_MF_CFG_MAX_BW_SHIFT;
-		/* Calculate the current MAX line speed limit for the DCC
-		 * capable devices
+		u16 maxCfg = bnx2x_extract_max_cfg(bp,
+						   bp->mf_config[BP_VN(bp)]);
+
+		/* Calculate the current MAX line speed limit for the MF
+		 * devices
 		 */
-		if (IS_MF_SD(bp)) {
+		if (IS_MF_SI(bp))
+			line_speed = (line_speed * maxCfg) / 100;
+		else { /* SD mode */
 			u16 vn_max_rate = maxCfg * 100;
 
 			if (vn_max_rate < line_speed)
 				line_speed = vn_max_rate;
-		} else /* IS_MF_SI(bp)) */
-			line_speed = (line_speed * maxCfg) / 100;
+		}
 	}
 
 	return line_speed;

drivers/net/bnx2x/bnx2x_cmn.h

@@ -1044,4 +1044,24 @@ static inline void storm_memset_cmng(struct bnx2x *bp,
 void bnx2x_acquire_phy_lock(struct bnx2x *bp);
 void bnx2x_release_phy_lock(struct bnx2x *bp);
 
+/**
+ * Extracts MAX BW part from MF configuration.
+ *
+ * @param bp
+ * @param mf_cfg
+ *
+ * @return u16
+ */
+static inline u16 bnx2x_extract_max_cfg(struct bnx2x *bp, u32 mf_cfg)
+{
+	u16 max_cfg = (mf_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
+			      FUNC_MF_CFG_MAX_BW_SHIFT;
+	if (!max_cfg) {
+		BNX2X_ERR("Illegal configuration detected for Max BW - "
+			  "using 100 instead\n");
+		max_cfg = 100;
+	}
+	return max_cfg;
+}
+
 #endif /* BNX2X_CMN_H */

drivers/net/bnx2x/bnx2x_ethtool.c

@@ -238,7 +238,7 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	speed |= (cmd->speed_hi << 16);
 
 	if (IS_MF_SI(bp)) {
-		u32 param = 0;
+		u32 param = 0, part;
 		u32 line_speed = bp->link_vars.line_speed;
 
 		/* use 10G if no link detected */
@@ -251,9 +251,11 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 				       REQ_BC_VER_4_SET_MF_BW);
 			return -EINVAL;
 		}
-		if (line_speed < speed) {
-			BNX2X_DEV_INFO("New speed should be less or equal "
-				       "to actual line speed\n");
+		part = (speed * 100) / line_speed;
+		if (line_speed < speed || !part) {
+			BNX2X_DEV_INFO("Speed setting should be in a range "
+				       "from 1%% to 100%% "
+				       "of actual line speed\n");
 			return -EINVAL;
 		}
 		/* load old values */
@@ -263,8 +265,7 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		param &= FUNC_MF_CFG_MIN_BW_MASK;
 
 		/* set new MAX value */
-		param |= (((speed * 100) / line_speed)
-				 << FUNC_MF_CFG_MAX_BW_SHIFT)
+		param |= (part << FUNC_MF_CFG_MAX_BW_SHIFT)
 				  & FUNC_MF_CFG_MAX_BW_MASK;
 
 		bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW, param);
@@ -1781,9 +1782,7 @@ static int bnx2x_test_nvram(struct bnx2x *bp)
 		{ 0x100, 0x350 }, /* manuf_info */
 		{ 0x450,  0xf0 }, /* feature_info */
 		{ 0x640,  0x64 }, /* upgrade_key_info */
-		{ 0x6a4,  0x64 },
 		{ 0x708,  0x70 }, /* manuf_key_info */
-		{ 0x778,  0x70 },
 		{     0,     0 }
 	};
 	__be32 buf[0x350 / 4];
@@ -1933,11 +1932,11 @@ static void bnx2x_self_test(struct net_device *dev,
 		buf[4] = 1;
 		etest->flags |= ETH_TEST_FL_FAILED;
 	}
-	if (bp->port.pmf)
-		if (bnx2x_link_test(bp, is_serdes) != 0) {
-			buf[5] = 1;
-			etest->flags |= ETH_TEST_FL_FAILED;
-		}
+
+	if (bnx2x_link_test(bp, is_serdes) != 0) {
+		buf[5] = 1;
+		etest->flags |= ETH_TEST_FL_FAILED;
+	}
 
 #ifdef BNX2X_EXTRA_DEBUG
 	bnx2x_panic_dump(bp);

drivers/net/bnx2x/bnx2x_init.h

@@ -241,7 +241,7 @@ static const struct {
 	/* Block IGU, MISC, PXP and PXP2 parity errors as long as we don't
 	 * want to handle "system kill" flow at the moment.
 	 */
-	BLOCK_PRTY_INFO(PXP, 0x3ffffff, 0x3ffffff, 0x3ffffff, 0x3ffffff),
+	BLOCK_PRTY_INFO(PXP, 0x7ffffff, 0x3ffffff, 0x3ffffff, 0x7ffffff),
 	BLOCK_PRTY_INFO_0(PXP2,	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff),
 	BLOCK_PRTY_INFO_1(PXP2,	0x7ff, 0x7f, 0x7f, 0x7ff),
 	BLOCK_PRTY_INFO(HC, 0x7, 0x7, 0x7, 0),

drivers/net/bnx2x/bnx2x_main.c

@@ -1974,13 +1974,22 @@ static void bnx2x_init_vn_minmax(struct bnx2x *bp, int vn)
 		vn_max_rate = 0;
 
 	} else {
+		u32 maxCfg = bnx2x_extract_max_cfg(bp, vn_cfg);
+
 		vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
 				FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
-		/* If min rate is zero - set it to 1 */
+		/* If fairness is enabled (not all min rates are zeroes) and
+		   if current min rate is zero - set it to 1.
+		   This is a requirement of the algorithm. */
 		if (bp->vn_weight_sum && (vn_min_rate == 0))
 			vn_min_rate = DEF_MIN_RATE;
-		vn_max_rate = ((vn_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
-				FUNC_MF_CFG_MAX_BW_SHIFT) * 100;
+
+		if (IS_MF_SI(bp))
+			/* maxCfg in percents of linkspeed */
+			vn_max_rate = (bp->link_vars.line_speed * maxCfg) / 100;
+		else
+			/* maxCfg is absolute in 100Mb units */
+			vn_max_rate = maxCfg * 100;
 	}
 
 	DP(NETIF_MSG_IFUP,
@@ -2006,7 +2015,8 @@ static void bnx2x_init_vn_minmax(struct bnx2x *bp, int vn)
 		m_fair_vn.vn_credit_delta =
 			max_t(u32, (vn_min_rate * (T_FAIR_COEF /
 						   (8 * bp->vn_weight_sum))),
-			      (bp->cmng.fair_vars.fair_threshold * 2));
+			      (bp->cmng.fair_vars.fair_threshold +
+							MIN_ABOVE_THRESH));
 		DP(NETIF_MSG_IFUP, "m_fair_vn.vn_credit_delta %d\n",
 		   m_fair_vn.vn_credit_delta);
 	}

drivers/net/bnx2x/bnx2x_stats.c

@@ -1239,14 +1239,14 @@ void bnx2x_stats_handle(struct bnx2x *bp, enum bnx2x_stats_event event)
 	if (unlikely(bp->panic))
 		return;
 
+	bnx2x_stats_stm[bp->stats_state][event].action(bp);
+
 	/* Protect a state change flow */
 	spin_lock_bh(&bp->stats_lock);
 	state = bp->stats_state;
 	bp->stats_state = bnx2x_stats_stm[state][event].next_state;
 	spin_unlock_bh(&bp->stats_lock);
 
-	bnx2x_stats_stm[state][event].action(bp);
-
 	if ((event != STATS_EVENT_UPDATE) || netif_msg_timer(bp))
 		DP(BNX2X_MSG_STATS, "state %d -> event %d -> state %d\n",
 		   state, event, bp->stats_state);

drivers/net/can/softing/softing_main.c

@@ -633,6 +633,7 @@ static const struct net_device_ops softing_netdev_ops = {
 };
 
 static const struct can_bittiming_const softing_btr_const = {
+	.name = "softing",
 	.tseg1_min = 1,
 	.tseg1_max = 16,
 	.tseg2_min = 1,