Merge tag 'usb-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git…

…/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a few tiny USB fixes for reported issues with some USB
  drivers.

  These fixes include:

   - gadget driver fixes for regressions

   - tcpm driver fix

   - dwc3 driver fixes

   - xhci renesas firmware loading fix, again.

   - usb serial option driver device id addition

   - usb serial ch341 revert for regression

  All all of these have been in linux-next with no reported problems"

* tag 'usb-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: u_audio: fix race condition on endpoint stop
  usb: gadget: f_uac2: fixup feedback endpoint stop
  usb: typec: tcpm: Raise vdm_sm_running flag only when VDM SM is running
  usb: renesas-xhci: Prefer firmware loading on unknown ROM state
  usb: dwc3: gadget: Stop EP0 transfers during pullup disable
  usb: dwc3: gadget: Fix dwc3_calc_trbs_left()
  Revert "USB: serial: ch341: fix character loss at high transfer rates"
  USB: serial: option: add new VID/PID to support Fibocom FG150

drivers/usb/dwc3/gadget.c

@@ -940,19 +940,19 @@ static struct dwc3_trb *dwc3_ep_prev_trb(struct dwc3_ep *dep, u8 index)
 
 static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep)
 {
-	struct dwc3_trb		*tmp;
 	u8			trbs_left;
 
 	/*
-	 * If enqueue & dequeue are equal than it is either full or empty.
-	 *
-	 * One way to know for sure is if the TRB right before us has HWO bit
-	 * set or not. If it has, then we're definitely full and can't fit any
-	 * more transfers in our ring.
+	 * If the enqueue & dequeue are equal then the TRB ring is either full
+	 * or empty. It's considered full when there are DWC3_TRB_NUM-1 of TRBs
+	 * pending to be processed by the driver.
 	 */
 	if (dep->trb_enqueue == dep->trb_dequeue) {
-		tmp = dwc3_ep_prev_trb(dep, dep->trb_enqueue);
-		if (tmp->ctrl & DWC3_TRB_CTRL_HWO)
+		/*
+		 * If there is any request remained in the started_list at
+		 * this point, that means there is no TRB available.
+		 */
+		if (!list_empty(&dep->started_list))
 			return 0;
 
 		return DWC3_TRB_NUM - 1;
@@ -2243,10 +2243,8 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 
 		ret = wait_for_completion_timeout(&dwc->ep0_in_setup,
 				msecs_to_jiffies(DWC3_PULL_UP_TIMEOUT));
-		if (ret == 0) {
-			dev_err(dwc->dev, "timed out waiting for SETUP phase\n");
-			return -ETIMEDOUT;
-		}
+		if (ret == 0)
+			dev_warn(dwc->dev, "timed out waiting for SETUP phase\n");
 	}
 
 	/*
@@ -2458,6 +2456,7 @@ static int __dwc3_gadget_start(struct dwc3 *dwc)
 	/* begin to receive SETUP packets */
 	dwc->ep0state = EP0_SETUP_PHASE;
 	dwc->link_state = DWC3_LINK_STATE_SS_DIS;
+	dwc->delayed_status = false;
 	dwc3_ep0_out_start(dwc);
 
 	dwc3_gadget_enable_irq(dwc);

drivers/usb/gadget/function/u_audio.c

@@ -230,7 +230,13 @@ static void u_audio_iso_fback_complete(struct usb_ep *ep,
 	int status = req->status;
 
 	/* i/f shutting down */
-	if (!prm->fb_ep_enabled || req->status == -ESHUTDOWN)
+	if (!prm->fb_ep_enabled) {
+		kfree(req->buf);
+		usb_ep_free_request(ep, req);
+		return;
+	}
+
+	if (req->status == -ESHUTDOWN)
 		return;
 
 	/*
@@ -388,8 +394,6 @@ static inline void free_ep(struct uac_rtd_params *prm, struct usb_ep *ep)
 	if (!prm->ep_enabled)
 		return;
 
-	prm->ep_enabled = false;
-
 	audio_dev = uac->audio_dev;
 	params = &audio_dev->params;
 
@@ -407,6 +411,8 @@ static inline void free_ep(struct uac_rtd_params *prm, struct usb_ep *ep)
 		}
 	}
 
+	prm->ep_enabled = false;
+
 	if (usb_ep_disable(ep))
 		dev_err(uac->card->dev, "%s:%d Error!\n", __func__, __LINE__);
 }
@@ -418,15 +424,16 @@ static inline void free_ep_fback(struct uac_rtd_params *prm, struct usb_ep *ep)
 	if (!prm->fb_ep_enabled)
 		return;
 
-	prm->fb_ep_enabled = false;
-
 	if (prm->req_fback) {
-		usb_ep_dequeue(ep, prm->req_fback);
-		kfree(prm->req_fback->buf);
-		usb_ep_free_request(ep, prm->req_fback);
+		if (usb_ep_dequeue(ep, prm->req_fback)) {
+			kfree(prm->req_fback->buf);
+			usb_ep_free_request(ep, prm->req_fback);
+		}
 		prm->req_fback = NULL;
 	}
 
+	prm->fb_ep_enabled = false;
+
 	if (usb_ep_disable(ep))
 		dev_err(uac->card->dev, "%s:%d Error!\n", __func__, __LINE__);
 }

drivers/usb/host/xhci-pci-renesas.c

@@ -207,7 +207,8 @@ static int renesas_check_rom_state(struct pci_dev *pdev)
 			return 0;
 
 		case RENESAS_ROM_STATUS_NO_RESULT: /* No result yet */
-			return 0;
+			dev_dbg(&pdev->dev, "Unknown ROM status ...\n");
+			return -ENOENT;
 
 		case RENESAS_ROM_STATUS_ERROR: /* Error State */
 		default: /* All other states are marked as "Reserved states" */
@@ -224,14 +225,6 @@ static int renesas_fw_check_running(struct pci_dev *pdev)
 	u8 fw_state;
 	int err;
 
-	/* Check if device has ROM and loaded, if so skip everything */
-	err = renesas_check_rom(pdev);
-	if (err) { /* we have rom */
-		err = renesas_check_rom_state(pdev);
-		if (!err)
-			return err;
-	}
-
 	/*
 	 * Test if the device is actually needing the firmware. As most
 	 * BIOSes will initialize the device for us. If the device is
@@ -591,21 +584,39 @@ int renesas_xhci_check_request_fw(struct pci_dev *pdev,
 			(struct xhci_driver_data *)id->driver_data;
 	const char *fw_name = driver_data->firmware;
 	const struct firmware *fw;
+	bool has_rom;
 	int err;
 
+	/* Check if device has ROM and loaded, if so skip everything */
+	has_rom = renesas_check_rom(pdev);
+	if (has_rom) {
+		err = renesas_check_rom_state(pdev);
+		if (!err)
+			return 0;
+		else if (err != -ENOENT)
+			has_rom = false;
+	}
+
 	err = renesas_fw_check_running(pdev);
 	/* Continue ahead, if the firmware is already running. */
 	if (err == 0)
 		return 0;
 
+	/* no firmware interface available */
 	if (err != 1)
-		return err;
+		return has_rom ? 0 : err;
 
 	pci_dev_get(pdev);
-	err = request_firmware(&fw, fw_name, &pdev->dev);
+	err = firmware_request_nowarn(&fw, fw_name, &pdev->dev);
 	pci_dev_put(pdev);
 	if (err) {
-		dev_err(&pdev->dev, "request_firmware failed: %d\n", err);
+		if (has_rom) {
+			dev_info(&pdev->dev, "failed to load firmware %s, fallback to ROM\n",
+				 fw_name);
+			return 0;
+		}
+		dev_err(&pdev->dev, "failed to load firmware %s: %d\n",
+			fw_name, err);
 		return err;
 	}
 

drivers/usb/serial/ch341.c

@@ -851,7 +851,6 @@ static struct usb_serial_driver ch341_device = {
 		.owner	= THIS_MODULE,
 		.name	= "ch341-uart",
 	},
-	.bulk_in_size      = 512,
 	.id_table          = id_table,
 	.num_ports         = 1,
 	.open              = ch341_open,

drivers/usb/serial/option.c

@@ -2074,6 +2074,8 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = RSVD(4) | RSVD(5) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff),			/* Fibocom NL678 series */
 	  .driver_info = RSVD(6) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) },	/* Fibocom FG150 Diag */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) },		/* Fibocom FG150 AT */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) },			/* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) },			/* LongSung M5710 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) },			/* GosunCn GM500 RNDIS */