Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-06-21

This series contains updates to ice driver only.

Marcin fixes GTP filters by allowing ignoring of the inner ethertype field.

Wojciech adds VSI handle tracking in order to properly distinguish similar
filters for removal.

Anatolii removes ability to set 1000baseT and 1000baseX fields
concurrently which caused link issues. He also disallows setting
channels to less than the number of Traffic Classes which would cause
NULL pointer dereference.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: ethtool: Prohibit improper channel config for DCB
  ice: ethtool: advertise 1000M speeds properly
  ice: Fix switchdev rules book keeping
  ice: ignore protocol field in GTP offload
====================

Link: https://lore.kernel.org/r/20220621224756.631765-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/intel/ice/ice_ethtool.c

@@ -2189,6 +2189,42 @@ ice_setup_autoneg(struct ice_port_info *p, struct ethtool_link_ksettings *ks,
 	return err;
 }
 
+/**
+ * ice_set_phy_type_from_speed - set phy_types based on speeds
+ * and advertised modes
+ * @ks: ethtool link ksettings struct
+ * @phy_type_low: pointer to the lower part of phy_type
+ * @phy_type_high: pointer to the higher part of phy_type
+ * @adv_link_speed: targeted link speeds bitmap
+ */
+static void
+ice_set_phy_type_from_speed(const struct ethtool_link_ksettings *ks,
+			    u64 *phy_type_low, u64 *phy_type_high,
+			    u16 adv_link_speed)
+{
+	/* Handle 1000M speed in a special way because ice_update_phy_type
+	 * enables all link modes, but having mixed copper and optical
+	 * standards is not supported.
+	 */
+	adv_link_speed &= ~ICE_AQ_LINK_SPEED_1000MB;
+
+	if (ethtool_link_ksettings_test_link_mode(ks, advertising,
+						  1000baseT_Full))
+		*phy_type_low |= ICE_PHY_TYPE_LOW_1000BASE_T |
+				 ICE_PHY_TYPE_LOW_1G_SGMII;
+
+	if (ethtool_link_ksettings_test_link_mode(ks, advertising,
+						  1000baseKX_Full))
+		*phy_type_low |= ICE_PHY_TYPE_LOW_1000BASE_KX;
+
+	if (ethtool_link_ksettings_test_link_mode(ks, advertising,
+						  1000baseX_Full))
+		*phy_type_low |= ICE_PHY_TYPE_LOW_1000BASE_SX |
+				 ICE_PHY_TYPE_LOW_1000BASE_LX;
+
+	ice_update_phy_type(phy_type_low, phy_type_high, adv_link_speed);
+}
+
 /**
  * ice_set_link_ksettings - Set Speed and Duplex
  * @netdev: network interface device structure
@@ -2320,7 +2356,8 @@ ice_set_link_ksettings(struct net_device *netdev,
 		adv_link_speed = curr_link_speed;
 
 	/* Convert the advertise link speeds to their corresponded PHY_TYPE */
-	ice_update_phy_type(&phy_type_low, &phy_type_high, adv_link_speed);
+	ice_set_phy_type_from_speed(ks, &phy_type_low, &phy_type_high,
+				    adv_link_speed);
 
 	if (!autoneg_changed && adv_link_speed == curr_link_speed) {
 		netdev_info(netdev, "Nothing changed, exiting without setting anything.\n");
@@ -3470,6 +3507,16 @@ static int ice_set_channels(struct net_device *dev, struct ethtool_channels *ch)
 	new_rx = ch->combined_count + ch->rx_count;
 	new_tx = ch->combined_count + ch->tx_count;
 
+	if (new_rx < vsi->tc_cfg.numtc) {
+		netdev_err(dev, "Cannot set less Rx channels, than Traffic Classes you have (%u)\n",
+			   vsi->tc_cfg.numtc);
+		return -EINVAL;
+	}
+	if (new_tx < vsi->tc_cfg.numtc) {
+		netdev_err(dev, "Cannot set less Tx channels, than Traffic Classes you have (%u)\n",
+			   vsi->tc_cfg.numtc);
+		return -EINVAL;
+	}
 	if (new_rx > ice_get_max_rxq(pf)) {
 		netdev_err(dev, "Maximum allowed Rx channels is %d\n",
 			   ice_get_max_rxq(pf));

drivers/net/ethernet/intel/ice/ice_lib.c

@@ -909,7 +909,7 @@ static void ice_set_dflt_vsi_ctx(struct ice_hw *hw, struct ice_vsi_ctx *ctxt)
  * @vsi: the VSI being configured
  * @ctxt: VSI context structure
  */
-static void ice_vsi_setup_q_map(struct ice_vsi *vsi, struct ice_vsi_ctx *ctxt)
+static int ice_vsi_setup_q_map(struct ice_vsi *vsi, struct ice_vsi_ctx *ctxt)
 {
 	u16 offset = 0, qmap = 0, tx_count = 0, pow = 0;
 	u16 num_txq_per_tc, num_rxq_per_tc;
@@ -982,7 +982,18 @@ static void ice_vsi_setup_q_map(struct ice_vsi *vsi, struct ice_vsi_ctx *ctxt)
 	else
 		vsi->num_rxq = num_rxq_per_tc;
 
+	if (vsi->num_rxq > vsi->alloc_rxq) {
+		dev_err(ice_pf_to_dev(vsi->back), "Trying to use more Rx queues (%u), than were allocated (%u)!\n",
+			vsi->num_rxq, vsi->alloc_rxq);
+		return -EINVAL;
+	}
+
 	vsi->num_txq = tx_count;
+	if (vsi->num_txq > vsi->alloc_txq) {
+		dev_err(ice_pf_to_dev(vsi->back), "Trying to use more Tx queues (%u), than were allocated (%u)!\n",
+			vsi->num_txq, vsi->alloc_txq);
+		return -EINVAL;
+	}
 
 	if (vsi->type == ICE_VSI_VF && vsi->num_txq != vsi->num_rxq) {
 		dev_dbg(ice_pf_to_dev(vsi->back), "VF VSI should have same number of Tx and Rx queues. Hence making them equal\n");
@@ -1000,6 +1011,8 @@ static void ice_vsi_setup_q_map(struct ice_vsi *vsi, struct ice_vsi_ctx *ctxt)
 	 */
 	ctxt->info.q_mapping[0] = cpu_to_le16(vsi->rxq_map[0]);
 	ctxt->info.q_mapping[1] = cpu_to_le16(vsi->num_rxq);
+
+	return 0;
 }
 
 /**
@@ -1187,7 +1200,10 @@ static int ice_vsi_init(struct ice_vsi *vsi, bool init_vsi)
 	if (vsi->type == ICE_VSI_CHNL) {
 		ice_chnl_vsi_setup_q_map(vsi, ctxt);
 	} else {
-		ice_vsi_setup_q_map(vsi, ctxt);
+		ret = ice_vsi_setup_q_map(vsi, ctxt);
+		if (ret)
+			goto out;
+
 		if (!init_vsi) /* means VSI being updated */
 			/* must to indicate which section of VSI context are
 			 * being modified
@@ -3464,7 +3480,7 @@ void ice_vsi_cfg_netdev_tc(struct ice_vsi *vsi, u8 ena_tc)
  *
  * Prepares VSI tc_config to have queue configurations based on MQPRIO options.
  */
-static void
+static int
 ice_vsi_setup_q_map_mqprio(struct ice_vsi *vsi, struct ice_vsi_ctx *ctxt,
 			   u8 ena_tc)
 {
@@ -3513,7 +3529,18 @@ ice_vsi_setup_q_map_mqprio(struct ice_vsi *vsi, struct ice_vsi_ctx *ctxt,
 
 	/* Set actual Tx/Rx queue pairs */
 	vsi->num_txq = offset + qcount_tx;
+	if (vsi->num_txq > vsi->alloc_txq) {
+		dev_err(ice_pf_to_dev(vsi->back), "Trying to use more Tx queues (%u), than were allocated (%u)!\n",
+			vsi->num_txq, vsi->alloc_txq);
+		return -EINVAL;
+	}
+
 	vsi->num_rxq = offset + qcount_rx;
+	if (vsi->num_rxq > vsi->alloc_rxq) {
+		dev_err(ice_pf_to_dev(vsi->back), "Trying to use more Rx queues (%u), than were allocated (%u)!\n",
+			vsi->num_rxq, vsi->alloc_rxq);
+		return -EINVAL;
+	}
 
 	/* Setup queue TC[0].qmap for given VSI context */
 	ctxt->info.tc_mapping[0] = cpu_to_le16(qmap);
@@ -3531,6 +3558,8 @@ ice_vsi_setup_q_map_mqprio(struct ice_vsi *vsi, struct ice_vsi_ctx *ctxt,
 	dev_dbg(ice_pf_to_dev(vsi->back), "vsi->num_rxq = %d\n",  vsi->num_rxq);
 	dev_dbg(ice_pf_to_dev(vsi->back), "all_numtc %u, all_enatc: 0x%04x, tc_cfg.numtc %u\n",
 		vsi->all_numtc, vsi->all_enatc, vsi->tc_cfg.numtc);
+
+	return 0;
 }
 
 /**
@@ -3580,9 +3609,12 @@ int ice_vsi_cfg_tc(struct ice_vsi *vsi, u8 ena_tc)
 
 	if (vsi->type == ICE_VSI_PF &&
 	    test_bit(ICE_FLAG_TC_MQPRIO, pf->flags))
-		ice_vsi_setup_q_map_mqprio(vsi, ctx, ena_tc);
+		ret = ice_vsi_setup_q_map_mqprio(vsi, ctx, ena_tc);
 	else
-		ice_vsi_setup_q_map(vsi, ctx);
+		ret = ice_vsi_setup_q_map(vsi, ctx);
+
+	if (ret)
+		goto out;
 
 	/* must to indicate which section of VSI context are being modified */
 	ctx->info.valid_sections = cpu_to_le16(ICE_AQ_VSI_PROP_RXQ_MAP_VALID);

drivers/net/ethernet/intel/ice/ice_tc_lib.c

@@ -524,6 +524,7 @@ ice_eswitch_add_tc_fltr(struct ice_vsi *vsi, struct ice_tc_flower_fltr *fltr)
 	 */
 	fltr->rid = rule_added.rid;
 	fltr->rule_id = rule_added.rule_id;
+	fltr->dest_id = rule_added.vsi_handle;
 
 exit:
 	kfree(list);
@@ -993,7 +994,9 @@ ice_parse_cls_flower(struct net_device *filter_dev, struct ice_vsi *vsi,
 		n_proto_key = ntohs(match.key->n_proto);
 		n_proto_mask = ntohs(match.mask->n_proto);
 
-		if (n_proto_key == ETH_P_ALL || n_proto_key == 0) {
+		if (n_proto_key == ETH_P_ALL || n_proto_key == 0 ||
+		    fltr->tunnel_type == TNL_GTPU ||
+		    fltr->tunnel_type == TNL_GTPC) {
 			n_proto_key = 0;
 			n_proto_mask = 0;
 		} else {