Merge tag 'linux-can-next-for-4.12-20170425' of git://git.kernel.org/…

…pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2017-04-25

this is a pull request of 21 patches for net-next/master.

There are 4 patches by Stephane Grosjean for the PEAK PCAN-PCIe FD
CAN-FD boards. The next 7 patches are by Mario Huettel, which add
support for M_CAN IP version >= v3.1.x to the m_can driver. A patch by
Remigiusz Kołłątaj adds support for the Microchip CAN BUS Analyzer. 8
patches by Oliver Hartkopp complete the initial CAN network namespace
support. Wei Yongjun's patch for the ti_hecc driver fixes the return
value check in the probe function.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/can/Kconfig

@@ -9,6 +9,24 @@ config CAN_VCAN
 	  This driver can also be built as a module.  If so, the module
 	  will be called vcan.
 
+config CAN_VXCAN
+	tristate "Virtual CAN Tunnel (vxcan)"
+	---help---
+	  Similar to the virtual ethernet driver veth, vxcan implements a
+	  local CAN traffic tunnel between two virtual CAN network devices.
+	  When creating a vxcan, two vxcan devices are created as pair.
+	  When one end receives the packet it appears on its pair and vice
+	  versa. The vxcan can be used for cross namespace communication.
+
+	  In opposite to vcan loopback devices the vxcan only forwards CAN
+	  frames to its pair and does *not* provide a local echo of sent
+	  CAN frames. To disable a potential echo in af_can.c the vxcan driver
+	  announces IFF_ECHO in the interface flags. To have a clean start
+	  in each namespace the CAN GW hop counter is set to zero.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called vxcan.
+
 config CAN_SLCAN
 	tristate "Serial / USB serial CAN Adaptors (slcan)"
 	depends on TTY
@@ -142,6 +160,7 @@ source "drivers/net/can/cc770/Kconfig"
 source "drivers/net/can/ifi_canfd/Kconfig"
 source "drivers/net/can/m_can/Kconfig"
 source "drivers/net/can/mscan/Kconfig"
+source "drivers/net/can/peak_canfd/Kconfig"
 source "drivers/net/can/rcar/Kconfig"
 source "drivers/net/can/sja1000/Kconfig"
 source "drivers/net/can/softing/Kconfig"

drivers/net/can/Makefile

@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_CAN_VCAN)		+= vcan.o
+obj-$(CONFIG_CAN_VXCAN)		+= vxcan.o
 obj-$(CONFIG_CAN_SLCAN)		+= slcan.o
 
 obj-$(CONFIG_CAN_DEV)		+= can-dev.o
@@ -26,6 +27,7 @@ obj-$(CONFIG_CAN_IFI_CANFD)	+= ifi_canfd/
 obj-$(CONFIG_CAN_JANZ_ICAN3)	+= janz-ican3.o
 obj-$(CONFIG_CAN_MSCAN)		+= mscan/
 obj-$(CONFIG_CAN_M_CAN)		+= m_can/
+obj-$(CONFIG_CAN_PEAK_PCIEFD)	+= peak_canfd/
 obj-$(CONFIG_CAN_SJA1000)	+= sja1000/
 obj-$(CONFIG_CAN_SUN4I)		+= sun4i_can.o
 obj-$(CONFIG_CAN_TI_HECC)	+= ti_hecc.o