Merge remote-tracking branches 'spi/topic/xilinx' and 'spi/topic/xtfp…

…ga' into spi-next

Documentation/devicetree/bindings/spi/spi-xtensa-xtfpga.txt

@@ -0,0 +1,9 @@
+Cadence Xtensa XTFPGA platform SPI controller.
+
+This simple SPI master controller is built into xtfpga bitstreams and is used
+to control daughterboard audio codec.
+
+Required properties:
+- compatible: should be "cdns,xtfpga-spi".
+- reg: physical base address of the controller and length of memory mapped
+  region.

MAINTAINERS

@@ -9782,6 +9782,12 @@ L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/tty/serial/uartlite.c
 
+XTENSA XTFPGA PLATFORM SUPPORT
+M:	Max Filippov <jcmvbkbc@gmail.com>
+L:	linux-xtensa@linux-xtensa.org
+S:	Maintained
+F:	drivers/spi/spi-xtensa-xtfpga.c
+
 YAM DRIVER FOR AX.25
 M:	Jean-Paul Roubelat <jpr@f6fbb.org>
 L:	linux-hams@vger.kernel.org

drivers/spi/Kconfig

@@ -538,6 +538,19 @@ config SPI_XILINX
 
 	  Or for the DS570, see "XPS Serial Peripheral Interface (SPI) (v2.00b)"
 
+config SPI_XTENSA_XTFPGA
+	tristate "Xtensa SPI controller for xtfpga"
+	depends on (XTENSA && XTENSA_PLATFORM_XTFPGA) || COMPILE_TEST
+	select SPI_BITBANG
+	help
+	  SPI driver for xtfpga SPI master controller.
+
+	  This simple SPI master controller is built into xtfpga bitstreams
+	  and is used to control daughterboard audio codec. It always transfers
+	  16 bit words in SPI mode 0, automatically asserting CS on transfer
+	  start and deasserting on end.
+
+
 config SPI_NUC900
 	tristate "Nuvoton NUC900 series SPI"
 	depends on ARCH_W90X900

drivers/spi/Makefile

@@ -81,3 +81,4 @@ obj-$(CONFIG_SPI_TOPCLIFF_PCH)		+= spi-topcliff-pch.o
 obj-$(CONFIG_SPI_TXX9)			+= spi-txx9.o
 obj-$(CONFIG_SPI_XCOMM)		+= spi-xcomm.o
 obj-$(CONFIG_SPI_XILINX)		+= spi-xilinx.o
+obj-$(CONFIG_SPI_XTENSA_XTFPGA)		+= spi-xtensa-xtfpga.o

drivers/spi/spi-xilinx.c

@@ -87,10 +87,10 @@ struct xilinx_spi {
 	const u8 *tx_ptr;	/* pointer in the Rx buffer */
 	int remaining_bytes;	/* the number of bytes left to transfer */
 	u8 bits_per_word;
-	unsigned int (*read_fn) (void __iomem *);
-	void (*write_fn) (u32, void __iomem *);
-	void (*tx_fn) (struct xilinx_spi *);
-	void (*rx_fn) (struct xilinx_spi *);
+	unsigned int (*read_fn)(void __iomem *);
+	void (*write_fn)(u32, void __iomem *);
+	void (*tx_fn)(struct xilinx_spi *);
+	void (*rx_fn)(struct xilinx_spi *);
 };
 
 static void xspi_write32(u32 val, void __iomem *addr)
@@ -208,26 +208,11 @@ static void xilinx_spi_chipselect(struct spi_device *spi, int is_on)
 }
 
 /* spi_bitbang requires custom setup_transfer() to be defined if there is a
- * custom txrx_bufs(). We have nothing to setup here as the SPI IP block
- * supports 8 or 16 bits per word which cannot be changed in software.
- * SPI clock can't be changed in software either.
- * Check for correct bits per word. Chip select delay calculations could be
- * added here as soon as bitbang_work() can be made aware of the delay value.
+ * custom txrx_bufs().
  */
 static int xilinx_spi_setup_transfer(struct spi_device *spi,
 		struct spi_transfer *t)
 {
-	struct xilinx_spi *xspi = spi_master_get_devdata(spi->master);
-	u8 bits_per_word;
-
-	bits_per_word = (t && t->bits_per_word)
-			 ? t->bits_per_word : spi->bits_per_word;
-	if (bits_per_word != xspi->bits_per_word) {
-		dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
-			__func__, bits_per_word);
-		return -EINVAL;
-	}
-
 	return 0;
 }
 
@@ -406,6 +391,7 @@ static int xilinx_spi_probe(struct platform_device *pdev)
 		xspi->write_fn = xspi_write32_be;
 	}
 
+	master->bits_per_word_mask = SPI_BPW_MASK(bits_per_word);
 	xspi->bits_per_word = bits_per_word;
 	if (xspi->bits_per_word == 8) {
 		xspi->tx_fn = xspi_tx8;

drivers/spi/spi-xtensa-xtfpga.c

@@ -0,0 +1,170 @@
+/*
+ * Xtensa xtfpga SPI controller driver
+ *
+ * Copyright (c) 2014 Cadence Design Systems Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#define XTFPGA_SPI_NAME "xtfpga_spi"
+
+#define XTFPGA_SPI_START	0x0
+#define XTFPGA_SPI_BUSY		0x4
+#define XTFPGA_SPI_DATA		0x8
+
+#define BUSY_WAIT_US		100
+
+struct xtfpga_spi {
+	struct spi_bitbang bitbang;
+	void __iomem *regs;
+	u32 data;
+	unsigned data_sz;
+};
+
+static inline void xtfpga_spi_write32(const struct xtfpga_spi *spi,
+				      unsigned addr, u32 val)
+{
+	iowrite32(val, spi->regs + addr);
+}
+
+static inline unsigned int xtfpga_spi_read32(const struct xtfpga_spi *spi,
+					     unsigned addr)
+{
+	return ioread32(spi->regs + addr);
+}
+
+static inline void xtfpga_spi_wait_busy(struct xtfpga_spi *xspi)
+{
+	unsigned i;
+	for (i = 0; xtfpga_spi_read32(xspi, XTFPGA_SPI_BUSY) &&
+	     i < BUSY_WAIT_US; ++i)
+		udelay(1);
+	WARN_ON_ONCE(i == BUSY_WAIT_US);
+}
+
+static u32 xtfpga_spi_txrx_word(struct spi_device *spi, unsigned nsecs,
+				u32 v, u8 bits)
+{
+	struct xtfpga_spi *xspi = spi_master_get_devdata(spi->master);
+
+	xspi->data = (xspi->data << bits) | (v & GENMASK(bits - 1, 0));
+	xspi->data_sz += bits;
+	if (xspi->data_sz >= 16) {
+		xtfpga_spi_write32(xspi, XTFPGA_SPI_DATA,
+				   xspi->data >> (xspi->data_sz - 16));
+		xspi->data_sz -= 16;
+		xtfpga_spi_write32(xspi, XTFPGA_SPI_START, 1);
+		xtfpga_spi_wait_busy(xspi);
+		xtfpga_spi_write32(xspi, XTFPGA_SPI_START, 0);
+	}
+
+	return 0;
+}
+
+static void xtfpga_spi_chipselect(struct spi_device *spi, int is_on)
+{
+	struct xtfpga_spi *xspi = spi_master_get_devdata(spi->master);
+
+	WARN_ON(xspi->data_sz != 0);
+	xspi->data_sz = 0;
+}
+
+static int xtfpga_spi_probe(struct platform_device *pdev)
+{
+	struct xtfpga_spi *xspi;
+	struct resource *mem;
+	int ret;
+	struct spi_master *master;
+
+	master = spi_alloc_master(&pdev->dev, sizeof(struct xtfpga_spi));
+	if (!master)
+		return -ENOMEM;
+
+	master->flags = SPI_MASTER_NO_RX;
+	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 16);
+	master->bus_num = pdev->dev.id;
+	master->dev.of_node = pdev->dev.of_node;
+
+	xspi = spi_master_get_devdata(master);
+	xspi->bitbang.master = master;
+	xspi->bitbang.chipselect = xtfpga_spi_chipselect;
+	xspi->bitbang.txrx_word[SPI_MODE_0] = xtfpga_spi_txrx_word;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		dev_err(&pdev->dev, "No memory resource\n");
+		ret = -ENODEV;
+		goto err;
+	}
+	xspi->regs = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(xspi->regs)) {
+		ret = PTR_ERR(xspi->regs);
+		goto err;
+	}
+
+	xtfpga_spi_write32(xspi, XTFPGA_SPI_START, 0);
+	usleep_range(1000, 2000);
+	if (xtfpga_spi_read32(xspi, XTFPGA_SPI_BUSY)) {
+		dev_err(&pdev->dev, "Device stuck in busy state\n");
+		ret = -EBUSY;
+		goto err;
+	}
+
+	ret = spi_bitbang_start(&xspi->bitbang);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "spi_bitbang_start failed\n");
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, master);
+	return 0;
+err:
+	spi_master_put(master);
+	return ret;
+}
+
+static int xtfpga_spi_remove(struct platform_device *pdev)
+{
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct xtfpga_spi *xspi = spi_master_get_devdata(master);
+
+	spi_bitbang_stop(&xspi->bitbang);
+	spi_master_put(master);
+
+	return 0;
+}
+
+MODULE_ALIAS("platform:" XTFPGA_SPI_NAME);
+
+#ifdef CONFIG_OF
+static const struct of_device_id xtfpga_spi_of_match[] = {
+	{ .compatible = "cdns,xtfpga-spi", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, xtfpga_spi_of_match);
+#endif
+
+static struct platform_driver xtfpga_spi_driver = {
+	.probe = xtfpga_spi_probe,
+	.remove = xtfpga_spi_remove,
+	.driver = {
+		.name = XTFPGA_SPI_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(xtfpga_spi_of_match),
+	},
+};
+module_platform_driver(xtfpga_spi_driver);
+
+MODULE_AUTHOR("Max Filippov <jcmvbkbc@gmail.com>");
+MODULE_DESCRIPTION("xtensa xtfpga SPI driver");
+MODULE_LICENSE("GPL");