ice: Move common functions out of ice_main.c part 1/7

The functions that are used for PF VSI/netdev setup will also be used
for SR-IOV support. To allow reuse of these functions, move these
functions out of ice_main.c to ice_common.c/ice_lib.c

This move is done across multiple patches. Each patch moves a few
functions and may have minor adjustments. For example, a function that was
previously static in ice_main.c will be made non-static temporarily in
its new location to allow the driver to build cleanly. These adjustments
will be removed in subsequent patches where more code is moved out of
ice_main.c

In this particular patch, the following functions were moved out of
ice_main.c:
int ice_add_mac_to_list
ice_free_fltr_list
ice_stat_update40
ice_stat_update32
ice_update_eth_stats
ice_vsi_add_vlan
ice_vsi_kill_vlan
ice_vsi_manage_vlan_insertion
ice_vsi_manage_vlan_stripping

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/ice/Makefile

@@ -13,5 +13,6 @@ ice-y := ice_main.o	\
 	 ice_nvm.o	\
 	 ice_switch.o	\
 	 ice_sched.o	\
+	 ice_lib.o	\
 	 ice_txrx.o	\
 	 ice_ethtool.o

drivers/net/ethernet/intel/ice/ice_common.c

@@ -2652,3 +2652,64 @@ ice_cfg_vsi_lan(struct ice_port_info *pi, u16 vsi_id, u8 tc_bitmap,
 	return ice_cfg_vsi_qs(pi, vsi_id, tc_bitmap, max_lanqs,
 			      ICE_SCHED_NODE_OWNER_LAN);
 }
+
+/**
+ * ice_stat_update40 - read 40 bit stat from the chip and update stat values
+ * @hw: ptr to the hardware info
+ * @hireg: high 32 bit HW register to read from
+ * @loreg: low 32 bit HW register to read from
+ * @prev_stat_loaded: bool to specify if previous stats are loaded
+ * @prev_stat: ptr to previous loaded stat value
+ * @cur_stat: ptr to current stat value
+ */
+void ice_stat_update40(struct ice_hw *hw, u32 hireg, u32 loreg,
+		       bool prev_stat_loaded, u64 *prev_stat, u64 *cur_stat)
+{
+	u64 new_data;
+
+	new_data = rd32(hw, loreg);
+	new_data |= ((u64)(rd32(hw, hireg) & 0xFFFF)) << 32;
+
+	/* device stats are not reset at PFR, they likely will not be zeroed
+	 * when the driver starts. So save the first values read and use them as
+	 * offsets to be subtracted from the raw values in order to report stats
+	 * that count from zero.
+	 */
+	if (!prev_stat_loaded)
+		*prev_stat = new_data;
+	if (new_data >= *prev_stat)
+		*cur_stat = new_data - *prev_stat;
+	else
+		/* to manage the potential roll-over */
+		*cur_stat = (new_data + BIT_ULL(40)) - *prev_stat;
+	*cur_stat &= 0xFFFFFFFFFFULL;
+}
+
+/**
+ * ice_stat_update32 - read 32 bit stat from the chip and update stat values
+ * @hw: ptr to the hardware info
+ * @reg: HW register to read from
+ * @prev_stat_loaded: bool to specify if previous stats are loaded
+ * @prev_stat: ptr to previous loaded stat value
+ * @cur_stat: ptr to current stat value
+ */
+void ice_stat_update32(struct ice_hw *hw, u32 reg, bool prev_stat_loaded,
+		       u64 *prev_stat, u64 *cur_stat)
+{
+	u32 new_data;
+
+	new_data = rd32(hw, reg);
+
+	/* device stats are not reset at PFR, they likely will not be zeroed
+	 * when the driver starts. So save the first values read and use them as
+	 * offsets to be subtracted from the raw values in order to report stats
+	 * that count from zero.
+	 */
+	if (!prev_stat_loaded)
+		*prev_stat = new_data;
+	if (new_data >= *prev_stat)
+		*cur_stat = new_data - *prev_stat;
+	else
+		/* to manage the potential roll-over */
+		*cur_stat = (new_data + BIT_ULL(32)) - *prev_stat;
+}

drivers/net/ethernet/intel/ice/ice_common.h

@@ -96,4 +96,8 @@ ice_ena_vsi_txq(struct ice_port_info *pi, u16 vsi_id, u8 tc, u8 num_qgrps,
 		struct ice_aqc_add_tx_qgrp *buf, u16 buf_size,
 		struct ice_sq_cd *cd);
 void ice_output_fw_log(struct ice_hw *hw, struct ice_aq_desc *desc, void *buf);
+void ice_stat_update40(struct ice_hw *hw, u32 hireg, u32 loreg,
+		       bool prev_stat_loaded, u64 *prev_stat, u64 *cur_stat);
+void ice_stat_update32(struct ice_hw *hw, u32 reg, bool prev_stat_loaded,
+		       u64 *prev_stat, u64 *cur_stat);
 #endif /* _ICE_COMMON_H_ */

drivers/net/ethernet/intel/ice/ice_lib.c

@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018, Intel Corporation. */
+
+#include "ice.h"
+#include "ice_lib.h"
+
+/**
+ * ice_add_mac_to_list - Add a mac address filter entry to the list
+ * @vsi: the VSI to be forwarded to
+ * @add_list: pointer to the list which contains MAC filter entries
+ * @macaddr: the MAC address to be added.
+ *
+ * Adds mac address filter entry to the temp list
+ *
+ * Returns 0 on success or ENOMEM on failure.
+ */
+int ice_add_mac_to_list(struct ice_vsi *vsi, struct list_head *add_list,
+			const u8 *macaddr)
+{
+	struct ice_fltr_list_entry *tmp;
+	struct ice_pf *pf = vsi->back;
+
+	tmp = devm_kzalloc(&pf->pdev->dev, sizeof(*tmp), GFP_ATOMIC);
+	if (!tmp)
+		return -ENOMEM;
+
+	tmp->fltr_info.flag = ICE_FLTR_TX;
+	tmp->fltr_info.src = vsi->vsi_num;
+	tmp->fltr_info.lkup_type = ICE_SW_LKUP_MAC;
+	tmp->fltr_info.fltr_act = ICE_FWD_TO_VSI;
+	tmp->fltr_info.fwd_id.vsi_id = vsi->vsi_num;
+	ether_addr_copy(tmp->fltr_info.l_data.mac.mac_addr, macaddr);
+
+	INIT_LIST_HEAD(&tmp->list_entry);
+	list_add(&tmp->list_entry, add_list);
+
+	return 0;
+}
+
+/**
+ * ice_update_eth_stats - Update VSI-specific ethernet statistics counters
+ * @vsi: the VSI to be updated
+ */
+void ice_update_eth_stats(struct ice_vsi *vsi)
+{
+	struct ice_eth_stats *prev_es, *cur_es;
+	struct ice_hw *hw = &vsi->back->hw;
+	u16 vsi_num = vsi->vsi_num;    /* HW absolute index of a VSI */
+
+	prev_es = &vsi->eth_stats_prev;
+	cur_es = &vsi->eth_stats;
+
+	ice_stat_update40(hw, GLV_GORCH(vsi_num), GLV_GORCL(vsi_num),
+			  vsi->stat_offsets_loaded, &prev_es->rx_bytes,
+			  &cur_es->rx_bytes);
+
+	ice_stat_update40(hw, GLV_UPRCH(vsi_num), GLV_UPRCL(vsi_num),
+			  vsi->stat_offsets_loaded, &prev_es->rx_unicast,
+			  &cur_es->rx_unicast);
+
+	ice_stat_update40(hw, GLV_MPRCH(vsi_num), GLV_MPRCL(vsi_num),
+			  vsi->stat_offsets_loaded, &prev_es->rx_multicast,
+			  &cur_es->rx_multicast);
+
+	ice_stat_update40(hw, GLV_BPRCH(vsi_num), GLV_BPRCL(vsi_num),
+			  vsi->stat_offsets_loaded, &prev_es->rx_broadcast,
+			  &cur_es->rx_broadcast);
+
+	ice_stat_update32(hw, GLV_RDPC(vsi_num), vsi->stat_offsets_loaded,
+			  &prev_es->rx_discards, &cur_es->rx_discards);
+
+	ice_stat_update40(hw, GLV_GOTCH(vsi_num), GLV_GOTCL(vsi_num),
+			  vsi->stat_offsets_loaded, &prev_es->tx_bytes,
+			  &cur_es->tx_bytes);
+
+	ice_stat_update40(hw, GLV_UPTCH(vsi_num), GLV_UPTCL(vsi_num),
+			  vsi->stat_offsets_loaded, &prev_es->tx_unicast,
+			  &cur_es->tx_unicast);
+
+	ice_stat_update40(hw, GLV_MPTCH(vsi_num), GLV_MPTCL(vsi_num),
+			  vsi->stat_offsets_loaded, &prev_es->tx_multicast,
+			  &cur_es->tx_multicast);
+
+	ice_stat_update40(hw, GLV_BPTCH(vsi_num), GLV_BPTCL(vsi_num),
+			  vsi->stat_offsets_loaded, &prev_es->tx_broadcast,
+			  &cur_es->tx_broadcast);
+
+	ice_stat_update32(hw, GLV_TEPC(vsi_num), vsi->stat_offsets_loaded,
+			  &prev_es->tx_errors, &cur_es->tx_errors);
+
+	vsi->stat_offsets_loaded = true;
+}
+
+/**
+ * ice_free_fltr_list - free filter lists helper
+ * @dev: pointer to the device struct
+ * @h: pointer to the list head to be freed
+ *
+ * Helper function to free filter lists previously created using
+ * ice_add_mac_to_list
+ */
+void ice_free_fltr_list(struct device *dev, struct list_head *h)
+{
+	struct ice_fltr_list_entry *e, *tmp;
+
+	list_for_each_entry_safe(e, tmp, h, list_entry) {
+		list_del(&e->list_entry);
+		devm_kfree(dev, e);
+	}
+}
+
+/**
+ * ice_vsi_add_vlan - Add VSI membership for given VLAN
+ * @vsi: the VSI being configured
+ * @vid: VLAN id to be added
+ */
+int ice_vsi_add_vlan(struct ice_vsi *vsi, u16 vid)
+{
+	struct ice_fltr_list_entry *tmp;
+	struct ice_pf *pf = vsi->back;
+	LIST_HEAD(tmp_add_list);
+	enum ice_status status;
+	int err = 0;
+
+	tmp = devm_kzalloc(&pf->pdev->dev, sizeof(*tmp), GFP_KERNEL);
+	if (!tmp)
+		return -ENOMEM;
+
+	tmp->fltr_info.lkup_type = ICE_SW_LKUP_VLAN;
+	tmp->fltr_info.fltr_act = ICE_FWD_TO_VSI;
+	tmp->fltr_info.flag = ICE_FLTR_TX;
+	tmp->fltr_info.src = vsi->vsi_num;
+	tmp->fltr_info.fwd_id.vsi_id = vsi->vsi_num;
+	tmp->fltr_info.l_data.vlan.vlan_id = vid;
+
+	INIT_LIST_HEAD(&tmp->list_entry);
+	list_add(&tmp->list_entry, &tmp_add_list);
+
+	status = ice_add_vlan(&pf->hw, &tmp_add_list);
+	if (status) {
+		err = -ENODEV;
+		dev_err(&pf->pdev->dev, "Failure Adding VLAN %d on VSI %i\n",
+			vid, vsi->vsi_num);
+	}
+
+	ice_free_fltr_list(&pf->pdev->dev, &tmp_add_list);
+	return err;
+}
+
+/**
+ * ice_vsi_kill_vlan - Remove VSI membership for a given VLAN
+ * @vsi: the VSI being configured
+ * @vid: VLAN id to be removed
+ *
+ * Returns 0 on success and negative on failure
+ */
+int ice_vsi_kill_vlan(struct ice_vsi *vsi, u16 vid)
+{
+	struct ice_fltr_list_entry *list;
+	struct ice_pf *pf = vsi->back;
+	LIST_HEAD(tmp_add_list);
+	int status = 0;
+
+	list = devm_kzalloc(&pf->pdev->dev, sizeof(*list), GFP_KERNEL);
+	if (!list)
+		return -ENOMEM;
+
+	list->fltr_info.lkup_type = ICE_SW_LKUP_VLAN;
+	list->fltr_info.fwd_id.vsi_id = vsi->vsi_num;
+	list->fltr_info.fltr_act = ICE_FWD_TO_VSI;
+	list->fltr_info.l_data.vlan.vlan_id = vid;
+	list->fltr_info.flag = ICE_FLTR_TX;
+	list->fltr_info.src = vsi->vsi_num;
+
+	INIT_LIST_HEAD(&list->list_entry);
+	list_add(&list->list_entry, &tmp_add_list);
+
+	if (ice_remove_vlan(&pf->hw, &tmp_add_list)) {
+		dev_err(&pf->pdev->dev, "Error removing VLAN %d on vsi %i\n",
+			vid, vsi->vsi_num);
+		status = -EIO;
+	}
+
+	ice_free_fltr_list(&pf->pdev->dev, &tmp_add_list);
+	return status;
+}
+
+/**
+ * ice_vsi_manage_vlan_insertion - Manage VLAN insertion for the VSI for Tx
+ * @vsi: the VSI being changed
+ */
+int ice_vsi_manage_vlan_insertion(struct ice_vsi *vsi)
+{
+	struct device *dev = &vsi->back->pdev->dev;
+	struct ice_hw *hw = &vsi->back->hw;
+	struct ice_vsi_ctx ctxt = { 0 };
+	enum ice_status status;
+
+	/* Here we are configuring the VSI to let the driver add VLAN tags by
+	 * setting vlan_flags to ICE_AQ_VSI_VLAN_MODE_ALL. The actual VLAN tag
+	 * insertion happens in the Tx hot path, in ice_tx_map.
+	 */
+	ctxt.info.vlan_flags = ICE_AQ_VSI_VLAN_MODE_ALL;
+
+	ctxt.info.valid_sections = cpu_to_le16(ICE_AQ_VSI_PROP_VLAN_VALID);
+	ctxt.vsi_num = vsi->vsi_num;
+
+	status = ice_aq_update_vsi(hw, &ctxt, NULL);
+	if (status) {
+		dev_err(dev, "update VSI for VLAN insert failed, err %d aq_err %d\n",
+			status, hw->adminq.sq_last_status);
+		return -EIO;
+	}
+
+	vsi->info.vlan_flags = ctxt.info.vlan_flags;
+	return 0;
+}
+
+/**
+ * ice_vsi_manage_vlan_stripping - Manage VLAN stripping for the VSI for Rx
+ * @vsi: the VSI being changed
+ * @ena: boolean value indicating if this is a enable or disable request
+ */
+int ice_vsi_manage_vlan_stripping(struct ice_vsi *vsi, bool ena)
+{
+	struct device *dev = &vsi->back->pdev->dev;
+	struct ice_hw *hw = &vsi->back->hw;
+	struct ice_vsi_ctx ctxt = { 0 };
+	enum ice_status status;
+
+	/* Here we are configuring what the VSI should do with the VLAN tag in
+	 * the Rx packet. We can either leave the tag in the packet or put it in
+	 * the Rx descriptor.
+	 */
+	if (ena) {
+		/* Strip VLAN tag from Rx packet and put it in the desc */
+		ctxt.info.vlan_flags = ICE_AQ_VSI_VLAN_EMOD_STR_BOTH;
+	} else {
+		/* Disable stripping. Leave tag in packet */
+		ctxt.info.vlan_flags = ICE_AQ_VSI_VLAN_EMOD_NOTHING;
+	}
+
+	/* Allow all packets untagged/tagged */
+	ctxt.info.vlan_flags |= ICE_AQ_VSI_VLAN_MODE_ALL;
+
+	ctxt.info.valid_sections = cpu_to_le16(ICE_AQ_VSI_PROP_VLAN_VALID);
+	ctxt.vsi_num = vsi->vsi_num;
+
+	status = ice_aq_update_vsi(hw, &ctxt, NULL);
+	if (status) {
+		dev_err(dev, "update VSI for VLAN strip failed, ena = %d err %d aq_err %d\n",
+			ena, status, hw->adminq.sq_last_status);
+		return -EIO;
+	}
+
+	vsi->info.vlan_flags = ctxt.info.vlan_flags;
+	return 0;
+}

drivers/net/ethernet/intel/ice/ice_lib.h

@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018, Intel Corporation. */
+
+#ifndef _ICE_LIB_H_
+#define _ICE_LIB_H_
+
+#include "ice.h"
+
+int ice_add_mac_to_list(struct ice_vsi *vsi, struct list_head *add_list,
+			const u8 *macaddr);
+
+void ice_free_fltr_list(struct device *dev, struct list_head *h);
+
+void ice_update_eth_stats(struct ice_vsi *vsi);
+
+int ice_vsi_add_vlan(struct ice_vsi *vsi, u16 vid);
+
+int ice_vsi_kill_vlan(struct ice_vsi *vsi, u16 vid);
+
+int ice_vsi_manage_vlan_insertion(struct ice_vsi *vsi);
+
+int ice_vsi_manage_vlan_stripping(struct ice_vsi *vsi, bool ena);
+#endif /* !_ICE_LIB_H_ */