Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/jkirsher/net

Jeff Kirsher says:

====================
This series contains updates to ixgbevf and igb.

The ixgbevf calls to pci_disable_msix() and to free the msix_entries
memory should not occur if device open fails.  Instead they should be
called during device driver removal to balance with the call to
pci_enable_msix() and the call to allocate msix_entries memory
during the device probe and driver load.

The remaining 4 of 5 igb patches are simple 1-3 line patches to fix
several issues such as possible null pointer dereference, PHC stopping
on max frequency, make sensor info static and SR-IOV initialization
reordering.

The remaining igb patch to fix anti-spoofing config fixes a problem
in i350 where anti spoofing configuration was written into a wrong
register.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/igb/e1000_82575.c

@@ -1818,27 +1818,32 @@ static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw)
  **/
 void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf)
 {
-	u32 dtxswc;
+	u32 reg_val, reg_offset;
 
 	switch (hw->mac.type) {
 	case e1000_82576:
+		reg_offset = E1000_DTXSWC;
+		break;
 	case e1000_i350:
-		dtxswc = rd32(E1000_DTXSWC);
-		if (enable) {
-			dtxswc |= (E1000_DTXSWC_MAC_SPOOF_MASK |
-				   E1000_DTXSWC_VLAN_SPOOF_MASK);
-			/* The PF can spoof - it has to in order to
-			 * support emulation mode NICs */
-			dtxswc ^= (1 << pf | 1 << (pf + MAX_NUM_VFS));
-		} else {
-			dtxswc &= ~(E1000_DTXSWC_MAC_SPOOF_MASK |
-				    E1000_DTXSWC_VLAN_SPOOF_MASK);
-		}
-		wr32(E1000_DTXSWC, dtxswc);
+		reg_offset = E1000_TXSWC;
 		break;
 	default:
-		break;
+		return;
+	}
+
+	reg_val = rd32(reg_offset);
+	if (enable) {
+		reg_val |= (E1000_DTXSWC_MAC_SPOOF_MASK |
+			     E1000_DTXSWC_VLAN_SPOOF_MASK);
+		/* The PF can spoof - it has to in order to
+		 * support emulation mode NICs
+		 */
+		reg_val ^= (1 << pf | 1 << (pf + MAX_NUM_VFS));
+	} else {
+		reg_val &= ~(E1000_DTXSWC_MAC_SPOOF_MASK |
+			     E1000_DTXSWC_VLAN_SPOOF_MASK);
 	}
+	wr32(reg_offset, reg_val);
 }
 
 /**

drivers/net/ethernet/intel/igb/igb_hwmon.c

@@ -39,7 +39,7 @@
 #include <linux/pci.h>
 
 #ifdef CONFIG_IGB_HWMON
-struct i2c_board_info i350_sensor_info = {
+static struct i2c_board_info i350_sensor_info = {
 	I2C_BOARD_INFO("i350bb", (0Xf8 >> 1)),
 };
 

drivers/net/ethernet/intel/igb/igb_main.c

@@ -2542,8 +2542,8 @@ static void igb_probe_vfs(struct igb_adapter *adapter)
 	if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211))
 		return;
 
-	igb_enable_sriov(pdev, max_vfs);
 	pci_sriov_set_totalvfs(pdev, 7);
+	igb_enable_sriov(pdev, max_vfs);
 
 #endif /* CONFIG_PCI_IOV */
 }
@@ -2652,7 +2652,7 @@ static int igb_sw_init(struct igb_adapter *adapter)
 		if (max_vfs > 7) {
 			dev_warn(&pdev->dev,
 				 "Maximum of 7 VFs per PF, using max\n");
-			adapter->vfs_allocated_count = 7;
+			max_vfs = adapter->vfs_allocated_count = 7;
 		} else
 			adapter->vfs_allocated_count = max_vfs;
 		if (adapter->vfs_allocated_count)

drivers/net/ethernet/intel/igb/igb_ptp.c

@@ -740,7 +740,7 @@ void igb_ptp_init(struct igb_adapter *adapter)
 	case e1000_82576:
 		snprintf(adapter->ptp_caps.name, 16, "%pm", netdev->dev_addr);
 		adapter->ptp_caps.owner = THIS_MODULE;
-		adapter->ptp_caps.max_adj = 1000000000;
+		adapter->ptp_caps.max_adj = 999999881;
 		adapter->ptp_caps.n_ext_ts = 0;
 		adapter->ptp_caps.pps = 0;
 		adapter->ptp_caps.adjfreq = igb_ptp_adjfreq_82576;

drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c

@@ -944,9 +944,17 @@ static int ixgbevf_request_msix_irqs(struct ixgbevf_adapter *adapter)
 		free_irq(adapter->msix_entries[vector].vector,
 			 adapter->q_vector[vector]);
 	}
-	pci_disable_msix(adapter->pdev);
-	kfree(adapter->msix_entries);
-	adapter->msix_entries = NULL;
+	/* This failure is non-recoverable - it indicates the system is
+	 * out of MSIX vector resources and the VF driver cannot run
+	 * without them.  Set the number of msix vectors to zero
+	 * indicating that not enough can be allocated.  The error
+	 * will be returned to the user indicating device open failed.
+	 * Any further attempts to force the driver to open will also
+	 * fail.  The only way to recover is to unload the driver and
+	 * reload it again.  If the system has recovered some MSIX
+	 * vectors then it may succeed.
+	 */
+	adapter->num_msix_vectors = 0;
 	return err;
 }
 
@@ -2572,6 +2580,15 @@ static int ixgbevf_open(struct net_device *netdev)
 	struct ixgbe_hw *hw = &adapter->hw;
 	int err;
 
+	/* A previous failure to open the device because of a lack of
+	 * available MSIX vector resources may have reset the number
+	 * of msix vectors variable to zero.  The only way to recover
+	 * is to unload/reload the driver and hope that the system has
+	 * been able to recover some MSIX vector resources.
+	 */
+	if (!adapter->num_msix_vectors)
+		return -ENOMEM;
+
 	/* disallow open during test */
 	if (test_bit(__IXGBEVF_TESTING, &adapter->state))
 		return -EBUSY;
@@ -2628,7 +2645,6 @@ static int ixgbevf_open(struct net_device *netdev)
 
 err_req_irq:
 	ixgbevf_down(adapter);
-	ixgbevf_free_irq(adapter);
 err_setup_rx:
 	ixgbevf_free_all_rx_resources(adapter);
 err_setup_tx: