Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Wire-up new system calls
  microblaze: Remove NO_IRQ from architecture
  input: xilinx_ps2: Don't use NO_IRQ
  block: xsysace: Don't use NO_IRQ
  microblaze: Trivial asm fix
  microblaze: Fix debug message in module
  microblaze: Remove eprintk macro
  microblaze: Send CR before LF for early console
  microblaze: Change NO_IRQ to 0
  microblaze: Use irq_of_parse_and_map for timer
  microblaze: intc: Change variable name
  microblaze: Use of_find_compatible_node for timer and intc
  microblaze: Add __cmpdi2
  microblaze: Synchronize __pa __va macros

arch/microblaze/include/asm/irq.h

@@ -9,7 +9,14 @@
 #ifndef _ASM_MICROBLAZE_IRQ_H
 #define _ASM_MICROBLAZE_IRQ_H
 
-#define NR_IRQS 32
+
+/*
+ * Linux IRQ# is currently offset by one to map to the hardware
+ * irq number. So hardware IRQ0 maps to Linux irq 1.
+ */
+#define NO_IRQ_OFFSET	1
+#define IRQ_OFFSET	NO_IRQ_OFFSET
+#define NR_IRQS		(32 + IRQ_OFFSET)
 #include <asm-generic/irq.h>
 
 /* This type is the placeholder for a hardware interrupt number. It has to
@@ -20,8 +27,6 @@ typedef unsigned long irq_hw_number_t;
 
 extern unsigned int nr_irq;
 
-#define NO_IRQ (-1)
-
 struct pt_regs;
 extern void do_IRQ(struct pt_regs *regs);
 

arch/microblaze/include/asm/page.h

@@ -174,15 +174,8 @@ extern int page_is_ram(unsigned long pfn);
 
 #define	virt_addr_valid(vaddr)	(pfn_valid(virt_to_pfn(vaddr)))
 
-
-#  ifndef CONFIG_MMU
-#  define __pa(vaddr)	((unsigned long) (vaddr))
-#  define __va(paddr)	((void *) (paddr))
-#  else /* CONFIG_MMU */
-#  define __pa(x)	__virt_to_phys((unsigned long)(x))
-#  define __va(x)	((void *)__phys_to_virt((unsigned long)(x)))
-#  endif /* CONFIG_MMU */
-
+# define __pa(x)	__virt_to_phys((unsigned long)(x))
+# define __va(x)	((void *)__phys_to_virt((unsigned long)(x)))
 
 /* Convert between virtual and physical address for MMU. */
 /* Handle MicroBlaze processor with virtual memory. */

arch/microblaze/include/asm/setup.h

@@ -26,12 +26,6 @@ int setup_early_printk(char *opt);
 void remap_early_printk(void);
 void disable_early_printk(void);
 
-#if defined(CONFIG_EARLY_PRINTK)
-#define eprintk early_printk
-#else
-#define eprintk printk
-#endif
-
 void heartbeat(void);
 void setup_heartbeat(void);
 

arch/microblaze/include/asm/unistd.h

@@ -391,8 +391,11 @@
 #define __NR_clock_adjtime	373
 #define __NR_syncfs		374
 #define __NR_setns		375
+#define __NR_sendmmsg		376
+#define __NR_process_vm_readv	377
+#define __NR_process_vm_writev	378
 
-#define __NR_syscalls		376
+#define __NR_syscalls		379
 
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__

arch/microblaze/kernel/early_printk.c

@@ -50,9 +50,9 @@ static void early_printk_uartlite_write(struct console *unused,
 					const char *s, unsigned n)
 {
 	while (*s && n-- > 0) {
-		early_printk_uartlite_putc(*s);
 		if (*s == '\n')
 			early_printk_uartlite_putc('\r');
+		early_printk_uartlite_putc(*s);
 		s++;
 	}
 }
@@ -94,9 +94,9 @@ static void early_printk_uart16550_write(struct console *unused,
 					const char *s, unsigned n)
 {
 	while (*s && n-- > 0) {
-		early_printk_uart16550_putc(*s);
 		if (*s == '\n')
 			early_printk_uart16550_putc('\r');
+		early_printk_uart16550_putc(*s);
 		s++;
 	}
 }

arch/microblaze/kernel/entry.S

@@ -468,7 +468,7 @@ C_ENTRY(sys_fork_wrapper):
 	addi	r5, r0, SIGCHLD			/* Arg 0: flags */
 	lwi	r6, r1, PT_R1	/* Arg 1: child SP (use parent's) */
 	addik	r7, r1, 0			/* Arg 2: parent context */
-	add	r8. r0, r0			/* Arg 3: (unused) */
+	add	r8, r0, r0			/* Arg 3: (unused) */
 	add	r9, r0, r0;			/* Arg 4: (unused) */
 	brid	do_fork		/* Do real work (tail-call) */
 	add	r10, r0, r0;			/* Arg 5: (unused) */

arch/microblaze/kernel/intc.c

@@ -42,8 +42,9 @@ unsigned int nr_irq;
 
 static void intc_enable_or_unmask(struct irq_data *d)
 {
-	unsigned long mask = 1 << d->irq;
-	pr_debug("enable_or_unmask: %d\n", d->irq);
+	unsigned long mask = 1 << d->hwirq;
+
+	pr_debug("enable_or_unmask: %ld\n", d->hwirq);
 	out_be32(INTC_BASE + SIE, mask);
 
 	/* ack level irqs because they can't be acked during
@@ -56,20 +57,21 @@ static void intc_enable_or_unmask(struct irq_data *d)
 
 static void intc_disable_or_mask(struct irq_data *d)
 {
-	pr_debug("disable: %d\n", d->irq);
-	out_be32(INTC_BASE + CIE, 1 << d->irq);
+	pr_debug("disable: %ld\n", d->hwirq);
+	out_be32(INTC_BASE + CIE, 1 << d->hwirq);
 }
 
 static void intc_ack(struct irq_data *d)
 {
-	pr_debug("ack: %d\n", d->irq);
-	out_be32(INTC_BASE + IAR, 1 << d->irq);
+	pr_debug("ack: %ld\n", d->hwirq);
+	out_be32(INTC_BASE + IAR, 1 << d->hwirq);
 }
 
 static void intc_mask_ack(struct irq_data *d)
 {
-	unsigned long mask = 1 << d->irq;
-	pr_debug("disable_and_ack: %d\n", d->irq);
+	unsigned long mask = 1 << d->hwirq;
+
+	pr_debug("disable_and_ack: %ld\n", d->hwirq);
 	out_be32(INTC_BASE + CIE, mask);
 	out_be32(INTC_BASE + IAR, mask);
 }
@@ -91,15 +93,15 @@ unsigned int get_irq(struct pt_regs *regs)
 	 * order to handle multiple interrupt controllers. It currently
 	 * is hardcoded to check for interrupts only on the first INTC.
 	 */
-	irq = in_be32(INTC_BASE + IVR);
+	irq = in_be32(INTC_BASE + IVR) + NO_IRQ_OFFSET;
 	pr_debug("get_irq: %d\n", irq);
 
 	return irq;
 }
 
 void __init init_IRQ(void)
 {
-	u32 i, j, intr_type;
+	u32 i, intr_mask;
 	struct device_node *intc = NULL;
 #ifdef CONFIG_SELFMOD_INTC
 	unsigned int intc_baseaddr = 0;
@@ -113,35 +115,24 @@ void __init init_IRQ(void)
 				0
 			};
 #endif
-	const char * const intc_list[] = {
-				"xlnx,xps-intc-1.00.a",
-				NULL
-			};
-
-	for (j = 0; intc_list[j] != NULL; j++) {
-		intc = of_find_compatible_node(NULL, NULL, intc_list[j]);
-		if (intc)
-			break;
-	}
+	intc = of_find_compatible_node(NULL, NULL, "xlnx,xps-intc-1.00.a");
 	BUG_ON(!intc);
 
-	intc_baseaddr = be32_to_cpup(of_get_property(intc,
-								"reg", NULL));
+	intc_baseaddr = be32_to_cpup(of_get_property(intc, "reg", NULL));
 	intc_baseaddr = (unsigned long) ioremap(intc_baseaddr, PAGE_SIZE);
 	nr_irq = be32_to_cpup(of_get_property(intc,
 						"xlnx,num-intr-inputs", NULL));
 
-	intr_type =
-		be32_to_cpup(of_get_property(intc,
-						"xlnx,kind-of-intr", NULL));
-	if (intr_type > (u32)((1ULL << nr_irq) - 1))
+	intr_mask =
+		be32_to_cpup(of_get_property(intc, "xlnx,kind-of-intr", NULL));
+	if (intr_mask > (u32)((1ULL << nr_irq) - 1))
 		printk(KERN_INFO " ERROR: Mismatch in kind-of-intr param\n");
 
 #ifdef CONFIG_SELFMOD_INTC
 	selfmod_function((int *) arr_func, intc_baseaddr);
 #endif
-	printk(KERN_INFO "%s #0 at 0x%08x, num_irq=%d, edge=0x%x\n",
-		intc_list[j], intc_baseaddr, nr_irq, intr_type);
+	printk(KERN_INFO "XPS intc #0 at 0x%08x, num_irq=%d, edge=0x%x\n",
+		intc_baseaddr, nr_irq, intr_mask);
 
 	/*
 	 * Disable all external interrupts until they are
@@ -155,8 +146,8 @@ void __init init_IRQ(void)
 	/* Turn on the Master Enable. */
 	out_be32(intc_baseaddr + MER, MER_HIE | MER_ME);
 
-	for (i = 0; i < nr_irq; ++i) {
-		if (intr_type & (0x00000001 << i)) {
+	for (i = IRQ_OFFSET; i < (nr_irq + IRQ_OFFSET); ++i) {
+		if (intr_mask & (0x00000001 << (i - IRQ_OFFSET))) {
 			irq_set_chip_and_handler_name(i, &intc_dev,
 				handle_edge_irq, "edge");
 			irq_clear_status_flags(i, IRQ_LEVEL);
@@ -165,5 +156,6 @@ void __init init_IRQ(void)
 				handle_level_irq, "level");
 			irq_set_status_flags(i, IRQ_LEVEL);
 		}
+		irq_get_irq_data(i)->hwirq = i - IRQ_OFFSET;
 	}
 }

arch/microblaze/kernel/irq.c

@@ -33,11 +33,12 @@ void __irq_entry do_IRQ(struct pt_regs *regs)
 	irq_enter();
 	irq = get_irq(regs);
 next_irq:
-	BUG_ON(irq == -1U);
-	generic_handle_irq(irq);
+	BUG_ON(!irq);
+	/* Substract 1 because of get_irq */
+	generic_handle_irq(irq + IRQ_OFFSET - NO_IRQ_OFFSET);
 
 	irq = get_irq(regs);
-	if (irq != -1U) {
+	if (irq) {
 		pr_debug("next irq: %d\n", irq);
 		++concurrent_irq;
 		goto next_irq;
@@ -52,13 +53,13 @@ void __irq_entry do_IRQ(struct pt_regs *regs)
   intc without any cascades or any connection that's why mapping is 1:1 */
 unsigned int irq_create_mapping(struct irq_host *host, irq_hw_number_t hwirq)
 {
-	return hwirq;
+	return hwirq + IRQ_OFFSET;
 }
 EXPORT_SYMBOL_GPL(irq_create_mapping);
 
 unsigned int irq_create_of_mapping(struct device_node *controller,
 				   const u32 *intspec, unsigned int intsize)
 {
-	return intspec[0];
+	return intspec[0] + IRQ_OFFSET;
 }
 EXPORT_SYMBOL_GPL(irq_create_of_mapping);

arch/microblaze/kernel/module.c

@@ -100,7 +100,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 			break;
 
 		case R_MICROBLAZE_64_NONE:
-			pr_debug("R_MICROBLAZE_NONE\n");
+			pr_debug("R_MICROBLAZE_64_NONE\n");
 			break;
 
 		case R_MICROBLAZE_NONE:

arch/microblaze/kernel/setup.c

@@ -145,32 +145,32 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 	setup_early_printk(NULL);
 #endif
 
-	eprintk("Ramdisk addr 0x%08x, ", ram);
+	printk("Ramdisk addr 0x%08x, ", ram);
 	if (fdt)
-		eprintk("FDT at 0x%08x\n", fdt);
+		printk("FDT at 0x%08x\n", fdt);
 	else
-		eprintk("Compiled-in FDT at 0x%08x\n",
+		printk("Compiled-in FDT at 0x%08x\n",
 					(unsigned int)_fdt_start);
 
 #ifdef CONFIG_MTD_UCLINUX
-	eprintk("Found romfs @ 0x%08x (0x%08x)\n",
+	printk("Found romfs @ 0x%08x (0x%08x)\n",
 			romfs_base, romfs_size);
-	eprintk("#### klimit %p ####\n", old_klimit);
+	printk("#### klimit %p ####\n", old_klimit);
 	BUG_ON(romfs_size < 0); /* What else can we do? */
 
-	eprintk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n",
+	printk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n",
 			romfs_size, romfs_base, (unsigned)&_ebss);
 
-	eprintk("New klimit: 0x%08x\n", (unsigned)klimit);
+	printk("New klimit: 0x%08x\n", (unsigned)klimit);
 #endif
 
 #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
 	if (msr)
-		eprintk("!!!Your kernel has setup MSR instruction but "
+		printk("!!!Your kernel has setup MSR instruction but "
 				"CPU don't have it %x\n", msr);
 #else
 	if (!msr)
-		eprintk("!!!Your kernel not setup MSR instruction but "
+		printk("!!!Your kernel not setup MSR instruction but "
 				"CPU have it %x\n", msr);
 #endif
 

arch/microblaze/kernel/syscall_table.S

@@ -380,3 +380,6 @@ ENTRY(sys_call_table)
 	.long sys_clock_adjtime
 	.long sys_syncfs
 	.long sys_setns			/* 375 */
+	.long sys_sendmmsg
+	.long sys_process_vm_readv
+	.long sys_process_vm_writev

arch/microblaze/kernel/timer.c

@@ -243,7 +243,7 @@ static int timer_initialized;
 
 void __init time_init(void)
 {
-	u32 irq, i = 0;
+	u32 irq;
 	u32 timer_num = 1;
 	struct device_node *timer = NULL;
 	const void *prop;
@@ -258,33 +258,24 @@ void __init time_init(void)
 				0
 			};
 #endif
-	const char * const timer_list[] = {
-		"xlnx,xps-timer-1.00.a",
-		NULL
-	};
-
-	for (i = 0; timer_list[i] != NULL; i++) {
-		timer = of_find_compatible_node(NULL, NULL, timer_list[i]);
-		if (timer)
-			break;
-	}
+	timer = of_find_compatible_node(NULL, NULL, "xlnx,xps-timer-1.00.a");
 	BUG_ON(!timer);
 
 	timer_baseaddr = be32_to_cpup(of_get_property(timer, "reg", NULL));
 	timer_baseaddr = (unsigned long) ioremap(timer_baseaddr, PAGE_SIZE);
-	irq = be32_to_cpup(of_get_property(timer, "interrupts", NULL));
+	irq = irq_of_parse_and_map(timer, 0);
 	timer_num = be32_to_cpup(of_get_property(timer,
 						"xlnx,one-timer-only", NULL));
 	if (timer_num) {
-		eprintk(KERN_EMERG "Please enable two timers in HW\n");
+		printk(KERN_EMERG "Please enable two timers in HW\n");
 		BUG();
 	}
 
 #ifdef CONFIG_SELFMOD_TIMER
 	selfmod_function((int *) arr_func, timer_baseaddr);
 #endif
-	printk(KERN_INFO "%s #0 at 0x%08x, irq=%d\n",
-		timer_list[i], timer_baseaddr, irq);
+	printk(KERN_INFO "XPS timer #0 at 0x%08x, irq=%d\n",
+		timer_baseaddr, irq);
 
 	/* If there is clock-frequency property than use it */
 	prop = of_get_property(timer, "clock-frequency", NULL);

arch/microblaze/lib/Makefile

@@ -20,6 +20,7 @@ lib-y += uaccess_old.o
 
 lib-y += ashldi3.o
 lib-y += ashrdi3.o
+lib-y += cmpdi2.o
 lib-y += divsi3.o
 lib-y += lshrdi3.o
 lib-y += modsi3.o

arch/microblaze/lib/cmpdi2.c

@@ -0,0 +1,26 @@
+#include <linux/module.h>
+
+#include "libgcc.h"
+
+word_type __cmpdi2(long long a, long long b)
+{
+	const DWunion au = {
+		.ll = a
+	};
+	const DWunion bu = {
+		.ll = b
+	};
+
+	if (au.s.high < bu.s.high)
+		return 0;
+	else if (au.s.high > bu.s.high)
+		return 2;
+
+	if ((unsigned int) au.s.low < (unsigned int) bu.s.low)
+		return 0;
+	else if ((unsigned int) au.s.low > (unsigned int) bu.s.low)
+		return 2;
+
+	return 1;
+}
+EXPORT_SYMBOL(__cmpdi2);