octeontx2-af: cn10k: Fix SDP base channel number

As per hardware the base channel number configured
for programmable channels of a block must be multiple
of number of channels of that block. This condition
is not met for SDP base channel currently. Hence this
patch ensures all the base channel numbers of all
blocks are multiple of number of channels present in
the blocks. Also instead of hardcoding SDP number
of channels the same is read from the NIX_AF_CONST1
register.

Fixes: 242da43 ("octeontx2-af: cn10k: Add support for programmable")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/marvell/octeontx2/af/common.h

@@ -192,8 +192,6 @@ enum nix_scheduler {
 #define NIX_CHAN_LBK_CHX(a, b)		(0 + 0x100 * (a) + (b))
 #define NIX_CHAN_SDP_CH_START		(0x700ull)
 
-#define SDP_CHANNELS			256
-
 /* The mask is to extract lower 10-bits of channel number
  * which CPT will pass to X2P.
  */

drivers/net/ethernet/marvell/octeontx2/af/rvu_cn10k.c

@@ -212,16 +212,18 @@ void rvu_reset_lmt_map_tbl(struct rvu *rvu, u16 pcifunc)
 
 int rvu_set_channels_base(struct rvu *rvu)
 {
+	u16 nr_lbk_chans, nr_sdp_chans, nr_cgx_chans, nr_cpt_chans;
+	u16 sdp_chan_base, cgx_chan_base, cpt_chan_base;
 	struct rvu_hwinfo *hw = rvu->hw;
-	u16 cpt_chan_base;
-	u64 nix_const;
+	u64 nix_const, nix_const1;
 	int blkaddr;
 
 	blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_NIX, 0);
 	if (blkaddr < 0)
 		return blkaddr;
 
 	nix_const = rvu_read64(rvu, blkaddr, NIX_AF_CONST);
+	nix_const1 = rvu_read64(rvu, blkaddr, NIX_AF_CONST1);
 
 	hw->cgx = (nix_const >> 12) & 0xFULL;
 	hw->lmac_per_cgx = (nix_const >> 8) & 0xFULL;
@@ -244,14 +246,24 @@ int rvu_set_channels_base(struct rvu *rvu)
 	 * channels such that all channel numbers are contiguous
 	 * leaving no holes. This way the new CPT channels can be
 	 * accomodated. The order of channel numbers assigned is
-	 * LBK, SDP, CGX and CPT.
+	 * LBK, SDP, CGX and CPT. Also the base channel number
+	 * of a block must be multiple of number of channels
+	 * of the block.
 	 */
-	hw->sdp_chan_base = hw->lbk_chan_base + hw->lbk_links *
-				((nix_const >> 16) & 0xFFULL);
-	hw->cgx_chan_base = hw->sdp_chan_base + hw->sdp_links * SDP_CHANNELS;
+	nr_lbk_chans = (nix_const >> 16) & 0xFFULL;
+	nr_sdp_chans = nix_const1 & 0xFFFULL;
+	nr_cgx_chans = nix_const & 0xFFULL;
+	nr_cpt_chans = (nix_const >> 32) & 0xFFFULL;
 
-	cpt_chan_base = hw->cgx_chan_base + hw->cgx_links *
-				(nix_const & 0xFFULL);
+	sdp_chan_base = hw->lbk_chan_base + hw->lbk_links * nr_lbk_chans;
+	/* Round up base channel to multiple of number of channels */
+	hw->sdp_chan_base = ALIGN(sdp_chan_base, nr_sdp_chans);
+
+	cgx_chan_base = hw->sdp_chan_base + hw->sdp_links * nr_sdp_chans;
+	hw->cgx_chan_base = ALIGN(cgx_chan_base, nr_cgx_chans);
+
+	cpt_chan_base = hw->cgx_chan_base + hw->cgx_links * nr_cgx_chans;
+	hw->cpt_chan_base = ALIGN(cpt_chan_base, nr_cpt_chans);
 
 	/* Out of 4096 channels start CPT from 2048 so
 	 * that MSB for CPT channels is always set
@@ -355,6 +367,7 @@ static void rvu_lbk_set_channels(struct rvu *rvu)
 
 static void __rvu_nix_set_channels(struct rvu *rvu, int blkaddr)
 {
+	u64 nix_const1 = rvu_read64(rvu, blkaddr, NIX_AF_CONST1);
 	u64 nix_const = rvu_read64(rvu, blkaddr, NIX_AF_CONST);
 	u16 cgx_chans, lbk_chans, sdp_chans, cpt_chans;
 	struct rvu_hwinfo *hw = rvu->hw;
@@ -364,7 +377,7 @@ static void __rvu_nix_set_channels(struct rvu *rvu, int blkaddr)
 
 	cgx_chans = nix_const & 0xFFULL;
 	lbk_chans = (nix_const >> 16) & 0xFFULL;
-	sdp_chans = SDP_CHANNELS;
+	sdp_chans = nix_const1 & 0xFFFULL;
 	cpt_chans = (nix_const >> 32) & 0xFFFULL;
 
 	start = hw->cgx_chan_base;