Merge branch 'linus' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

.mailmap

@@ -137,6 +137,7 @@ Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
 Rudolf Marek <R.Marek@sh.cvut.cz>
 Rui Saraiva <rmps@joel.ist.utl.pt>
 Sachin P Sant <ssant@in.ibm.com>
+Sarangdhar Joshi <spjoshi@codeaurora.org>
 Sam Ravnborg <sam@mars.ravnborg.org>
 Santosh Shilimkar <ssantosh@kernel.org>
 Santosh Shilimkar <santosh.shilimkar@oracle.org>
@@ -150,10 +151,13 @@ Shuah Khan <shuah@kernel.org> <shuah.kh@samsung.com>
 Simon Kelley <simon@thekelleys.org.uk>
 Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
 Stephen Hemminger <shemminger@osdl.org>
+Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
+Subhash Jadavani <subhashj@codeaurora.org>
 Sudeep Holla <sudeep.holla@arm.com> Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
 Sumit Semwal <sumit.semwal@ti.com>
 Tejun Heo <htejun@gmail.com>
 Thomas Graf <tgraf@suug.ch>
+Thomas Pedersen <twp@codeaurora.org>
 Tony Luck <tony.luck@intel.com>
 Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
 Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>

Documentation/admin-guide/kernel-parameters.txt

@@ -106,6 +106,16 @@
 			use by PCI
 			Format: <irq>,<irq>...
 
+	acpi_mask_gpe=  [HW,ACPI]
+			Due to the existence of _Lxx/_Exx, some GPEs triggered
+			by unsupported hardware/firmware features can result in
+                        GPE floodings that cannot be automatically disabled by
+                        the GPE dispatcher.
+			This facility can be used to prevent such uncontrolled
+			GPE floodings.
+			Format: <int>
+			Support masking of GPEs numbered from 0x00 to 0x7f.
+
 	acpi_no_auto_serialize	[HW,ACPI]
 			Disable auto-serialization of AML methods
 			AML control methods that contain the opcodes to create
@@ -3811,10 +3821,11 @@
 			it if 0 is given (See Documentation/cgroup-v1/memory.txt)
 
 	swiotlb=	[ARM,IA-64,PPC,MIPS,X86]
-			Format: { <int> | force }
+			Format: { <int> | force | noforce }
 			<int> -- Number of I/O TLB slabs
 			force -- force using of bounce buffers even if they
 			         wouldn't be automatically used by the kernel
+			noforce -- Never use bounce buffers (for debugging)
 
 	switches=	[HW,M68k]
 

Documentation/block/queue-sysfs.txt

@@ -54,9 +54,9 @@ This is the hardware sector size of the device, in bytes.
 
 io_poll (RW)
 ------------
-When read, this file shows the total number of block IO polls and how
-many returned success.  Writing '0' to this file will disable polling
-for this device.  Writing any non-zero value will enable this feature.
+When read, this file shows whether polling is enabled (1) or disabled
+(0).  Writing '0' to this file will disable polling for this device.
+Writing any non-zero value will enable this feature.
 
 io_poll_delay (RW)
 ------------------

Documentation/devicetree/bindings/i2c/i2c.txt

@@ -62,6 +62,9 @@ wants to support one of the below features, it should adapt the bindings below.
 	"irq" and "wakeup" names are recognized by I2C core, other names are
 	left to individual drivers.
 
+- host-notify
+	device uses SMBus host notify protocol instead of interrupt line.
+
 - multi-master
 	states that there is another master active on this bus. The OS can use
 	this information to adapt power management to keep the arbitration awake
@@ -81,6 +84,11 @@ Binding may contain optional "interrupts" property, describing interrupts
 used by the device. I2C core will assign "irq" interrupt (or the very first
 interrupt if not using interrupt names) as primary interrupt for the slave.
 
+Alternatively, devices supporting SMbus Host Notify, and connected to
+adapters that support this feature, may use "host-notify" property. I2C
+core will create a virtual interrupt for Host Notify and assign it as
+primary interrupt for the slave.
+
 Also, if device is marked as a wakeup source, I2C core will set up "wakeup"
 interrupt for the device. If "wakeup" interrupt name is not present in the
 binding, then primary interrupt will be used as wakeup interrupt.

Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt

@@ -8,15 +8,17 @@ This driver provides a simple power button event via an Interrupt.
 Required properties:
 - compatible: should be "ti,tps65217-pwrbutton" or "ti,tps65218-pwrbutton"
 
-Required properties for TPS65218:
+Required properties:
 - interrupts: should be one of the following
+   - <2>: For controllers compatible with tps65217
    - <3 IRQ_TYPE_EDGE_BOTH>: For controllers compatible with tps65218
 
 Examples:
 
 &tps {
 	tps65217-pwrbutton {
 		compatible = "ti,tps65217-pwrbutton";
+		interrupts = <2>;
 	};
 };
 

Documentation/devicetree/bindings/mtd/tango-nand.txt

@@ -5,7 +5,7 @@ Required properties:
 - compatible: "sigma,smp8758-nand"
 - reg: address/size of nfc_reg, nfc_mem, and pbus_reg
 - dmas: reference to the DMA channel used by the controller
-- dma-names: "nfc_sbox"
+- dma-names: "rxtx"
 - clocks: reference to the system clock
 - #address-cells: <1>
 - #size-cells: <0>
@@ -17,9 +17,9 @@ Example:
 
 	nandc: nand-controller@2c000 {
 		compatible = "sigma,smp8758-nand";
-		reg = <0x2c000 0x30 0x2d000 0x800 0x20000 0x1000>;
+		reg = <0x2c000 0x30>, <0x2d000 0x800>, <0x20000 0x1000>;
 		dmas = <&dma0 3>;
-		dma-names = "nfc_sbox";
+		dma-names = "rxtx";
 		clocks = <&clkgen SYS_CLK>;
 		#address-cells = <1>;
 		#size-cells = <0>;

Documentation/devicetree/bindings/net/ti,dp83867.txt

@@ -3,9 +3,11 @@
 Required properties:
 	- reg - The ID number for the phy, usually a small integer
 	- ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h
-		for applicable values
+		for applicable values. Required only if interface type is
+		PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID
 	- ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
-		for applicable values
+		for applicable values. Required only if interface type is
+		PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID
 	- ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
 		for applicable values
 

Documentation/devicetree/bindings/power/supply/tps65217_charger.txt

@@ -2,11 +2,16 @@ TPS65217 Charger
 
 Required Properties:
 -compatible: "ti,tps65217-charger"
+-interrupts: TPS65217 interrupt numbers for the AC and USB charger input change.
+             Should be <0> for the USB charger and <1> for the AC adapter.
+-interrupt-names: Should be "USB" and "AC"
 
 This node is a subnode of the tps65217 PMIC.
 
 Example:
 
 	tps65217-charger {
-		compatible = "ti,tps65090-charger";
+		compatible = "ti,tps65217-charger";
+		interrupts = <0>, <1>;
+		interrupt-names = "USB", "AC";
 	};

Documentation/devicetree/bindings/spi/sh-msiof.txt

@@ -1,17 +1,23 @@
 Renesas MSIOF spi controller
 
 Required properties:
-- compatible           : "renesas,msiof-<soctype>" for SoCs,
-			 "renesas,sh-msiof" for SuperH, or
-			 "renesas,sh-mobile-msiof" for SH Mobile series.
-			 Examples with soctypes are:
-			 "renesas,msiof-r8a7790" (R-Car H2)
+- compatible           : "renesas,msiof-r8a7790" (R-Car H2)
 			 "renesas,msiof-r8a7791" (R-Car M2-W)
 			 "renesas,msiof-r8a7792" (R-Car V2H)
 			 "renesas,msiof-r8a7793" (R-Car M2-N)
 			 "renesas,msiof-r8a7794" (R-Car E2)
 			 "renesas,msiof-r8a7796" (R-Car M3-W)
 			 "renesas,msiof-sh73a0" (SH-Mobile AG5)
+			 "renesas,sh-mobile-msiof" (generic SH-Mobile compatibile device)
+			 "renesas,rcar-gen2-msiof" (generic R-Car Gen2 compatible device)
+			 "renesas,rcar-gen3-msiof" (generic R-Car Gen3 compatible device)
+			 "renesas,sh-msiof"      (deprecated)
+
+			 When compatible with the generic version, nodes
+			 must list the SoC-specific version corresponding
+			 to the platform first followed by the generic
+			 version.
+
 - reg                  : A list of offsets and lengths of the register sets for
 			 the device.
 			 If only one register set is present, it is to be used
@@ -61,7 +67,8 @@ Documentation/devicetree/bindings/pinctrl/renesas,*.
 Example:
 
 	msiof0: spi@e6e20000 {
-		compatible = "renesas,msiof-r8a7791";
+		compatible = "renesas,msiof-r8a7791",
+			     "renesas,rcar-gen2-msiof";
 		reg = <0 0xe6e20000 0 0x0064>;
 		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;

Documentation/driver-api/infrastructure.rst

@@ -55,21 +55,6 @@ Device Drivers DMA Management
 .. kernel-doc:: drivers/base/dma-mapping.c
    :export:
 
-Device Drivers Power Management
--------------------------------
-
-.. kernel-doc:: drivers/base/power/main.c
-   :export:
-
-Device Drivers ACPI Support
----------------------------
-
-.. kernel-doc:: drivers/acpi/scan.c
-   :export:
-
-.. kernel-doc:: drivers/acpi/scan.c
-   :internal:
-
 Device drivers PnP support
 --------------------------
 

Documentation/filesystems/proc.txt

@@ -212,10 +212,11 @@ asynchronous manner and the value may not be very precise. To see a precise
 snapshot of a moment, you can see /proc/<pid>/smaps file and scan page table.
 It's slow but very precise.
 
-Table 1-2: Contents of the status files (as of 4.1)
+Table 1-2: Contents of the status files (as of 4.8)
 ..............................................................................
  Field                       Content
  Name                        filename of the executable
+ Umask                       file mode creation mask
  State                       state (R is running, S is sleeping, D is sleeping
                              in an uninterruptible wait, Z is zombie,
 			     T is traced or stopped)
@@ -226,7 +227,6 @@ Table 1-2: Contents of the status files (as of 4.1)
  TracerPid                   PID of process tracing this process (0 if not)
  Uid                         Real, effective, saved set, and  file system UIDs
  Gid                         Real, effective, saved set, and  file system GIDs
- Umask                       file mode creation mask
  FDSize                      number of file descriptor slots currently allocated
  Groups                      supplementary group list
  NStgid                      descendant namespace thread group ID hierarchy
@@ -236,6 +236,7 @@ Table 1-2: Contents of the status files (as of 4.1)
  VmPeak                      peak virtual memory size
  VmSize                      total program size
  VmLck                       locked memory size
+ VmPin                       pinned memory size
  VmHWM                       peak resident set size ("high water mark")
  VmRSS                       size of memory portions. It contains the three
                              following parts (VmRSS = RssAnon + RssFile + RssShmem)

Documentation/networking/mpls-sysctl.txt

@@ -5,8 +5,8 @@ platform_labels - INTEGER
 	possible to configure forwarding for label values equal to or
 	greater than the number of platform labels.
 
-	A dense utliziation of the entries in the platform label table
-	is possible and expected aas the platform labels are locally
+	A dense utilization of the entries in the platform label table
+	is possible and expected as the platform labels are locally
 	allocated.
 
 	If the number of platform label table entries is set to 0 no

Documentation/vfio-mediated-device.txt

@@ -127,22 +127,22 @@ the VFIO when devices are unbound from the driver.
 Physical Device Driver Interface
 --------------------------------
 
-The physical device driver interface provides the parent_ops[3] structure to
-define the APIs to manage work in the mediated core driver that is related to
-the physical device.
+The physical device driver interface provides the mdev_parent_ops[3] structure
+to define the APIs to manage work in the mediated core driver that is related
+to the physical device.
 
-The structures in the parent_ops structure are as follows:
+The structures in the mdev_parent_ops structure are as follows:
 
 * dev_attr_groups: attributes of the parent device
 * mdev_attr_groups: attributes of the mediated device
 * supported_config: attributes to define supported configurations
 
-The functions in the parent_ops structure are as follows:
+The functions in the mdev_parent_ops structure are as follows:
 
 * create: allocate basic resources in a driver for a mediated device
 * remove: free resources in a driver when a mediated device is destroyed
 
-The callbacks in the parent_ops structure are as follows:
+The callbacks in the mdev_parent_ops structure are as follows:
 
 * open: open callback of mediated device
 * close: close callback of mediated device
@@ -151,14 +151,14 @@ The callbacks in the parent_ops structure are as follows:
 * write: write emulation callback
 * mmap: mmap emulation callback
 
-A driver should use the parent_ops structure in the function call to register
-itself with the mdev core driver:
+A driver should use the mdev_parent_ops structure in the function call to
+register itself with the mdev core driver:
 
 extern int  mdev_register_device(struct device *dev,
-                                 const struct parent_ops *ops);
+                                 const struct mdev_parent_ops *ops);
 
-However, the parent_ops structure is not required in the function call that a
-driver should use to unregister itself with the mdev core driver:
+However, the mdev_parent_ops structure is not required in the function call
+that a driver should use to unregister itself with the mdev core driver:
 
 extern void mdev_unregister_device(struct device *dev);
 
@@ -223,6 +223,9 @@ Directories and files under the sysfs for Each Physical Device
 
 	sprintf(buf, "%s-%s", dev_driver_string(parent->dev), group->name);
 
+  (or using mdev_parent_dev(mdev) to arrive at the parent device outside
+   of the core mdev code)
+
 * device_api
 
   This attribute should show which device API is being created, for example,
@@ -394,5 +397,5 @@ References
 
 [1] See Documentation/vfio.txt for more information on VFIO.
 [2] struct mdev_driver in include/linux/mdev.h
-[3] struct parent_ops in include/linux/mdev.h
+[3] struct mdev_parent_ops in include/linux/mdev.h
 [4] struct vfio_iommu_driver_ops in include/linux/vfio.h

Documentation/vm/page_frags

@@ -0,0 +1,42 @@
+Page fragments
+--------------
+
+A page fragment is an arbitrary-length arbitrary-offset area of memory
+which resides within a 0 or higher order compound page.  Multiple
+fragments within that page are individually refcounted, in the page's
+reference counter.
+
+The page_frag functions, page_frag_alloc and page_frag_free, provide a
+simple allocation framework for page fragments.  This is used by the
+network stack and network device drivers to provide a backing region of
+memory for use as either an sk_buff->head, or to be used in the "frags"
+portion of skb_shared_info.
+
+In order to make use of the page fragment APIs a backing page fragment
+cache is needed.  This provides a central point for the fragment allocation
+and tracks allows multiple calls to make use of a cached page.  The
+advantage to doing this is that multiple calls to get_page can be avoided
+which can be expensive at allocation time.  However due to the nature of
+this caching it is required that any calls to the cache be protected by
+either a per-cpu limitation, or a per-cpu limitation and forcing interrupts
+to be disabled when executing the fragment allocation.
+
+The network stack uses two separate caches per CPU to handle fragment
+allocation.  The netdev_alloc_cache is used by callers making use of the
+__netdev_alloc_frag and __netdev_alloc_skb calls.  The napi_alloc_cache is
+used by callers of the __napi_alloc_frag and __napi_alloc_skb calls.  The
+main difference between these two calls is the context in which they may be
+called.  The "netdev" prefixed functions are usable in any context as these
+functions will disable interrupts, while the "napi" prefixed functions are
+only usable within the softirq context.
+
+Many network device drivers use a similar methodology for allocating page
+fragments, but the page fragments are cached at the ring or descriptor
+level.  In order to enable these cases it is necessary to provide a generic
+way of tearing down a page cache.  For this reason __page_frag_cache_drain
+was implemented.  It allows for freeing multiple references from a single
+page via a single call.  The advantage to doing this is that it allows for
+cleaning up the multiple references that were added to a page in order to
+avoid calling get_page per allocation.
+
+Alexander Duyck, Nov 29, 2016.