net: Adding support for Cavium ThunderX network controller

This patch adds support for the Cavium ThunderX network controller.
The driver is on the pci bus and thus requires the Thunder PCIe host
controller driver to be enabled.

Signed-off-by: Maciej Czekaj <mjc@semihalf.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@caviumnetworks.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com>
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Kamil Rytarowski <kamil@semihalf.com>
Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@caviumnetworks.com>
Signed-off-by: Sruthi Vangala <svangala@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS

@@ -921,6 +921,13 @@ M:	Krzysztof Halasa <khalasa@piap.pl>
 S:	Maintained
 F:	arch/arm/mach-cns3xxx/
 
+ARM/CAVIUM THUNDER NETWORK DRIVER
+M:	Sunil Goutham <sgoutham@cavium.com>
+M:	Robert Richter <rric@kernel.org>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Supported
+F:	drivers/net/ethernet/cavium/
+
 ARM/CIRRUS LOGIC CLPS711X ARM ARCHITECTURE
 M:	Alexander Shiyan <shc_work@mail.ru>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)

drivers/net/ethernet/Kconfig

@@ -34,6 +34,7 @@ source "drivers/net/ethernet/adi/Kconfig"
 source "drivers/net/ethernet/broadcom/Kconfig"
 source "drivers/net/ethernet/brocade/Kconfig"
 source "drivers/net/ethernet/calxeda/Kconfig"
+source "drivers/net/ethernet/cavium/Kconfig"
 source "drivers/net/ethernet/chelsio/Kconfig"
 source "drivers/net/ethernet/cirrus/Kconfig"
 source "drivers/net/ethernet/cisco/Kconfig"

drivers/net/ethernet/Makefile

@@ -20,6 +20,7 @@ obj-$(CONFIG_NET_BFIN) += adi/
 obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
 obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
 obj-$(CONFIG_NET_CALXEDA_XGMAC) += calxeda/
+obj-$(CONFIG_NET_VENDOR_CAVIUM) += cavium/
 obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
 obj-$(CONFIG_NET_VENDOR_CIRRUS) += cirrus/
 obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/

drivers/net/ethernet/cavium/Kconfig

@@ -0,0 +1,40 @@
+#
+# Cavium ethernet device configuration
+#
+
+config NET_VENDOR_CAVIUM
+	tristate "Cavium ethernet drivers"
+	depends on PCI
+	---help---
+	  Enable support for the Cavium ThunderX Network Interface
+	  Controller (NIC). The NIC provides the controller and DMA
+	  engines to move network traffic to/from the memory. The NIC
+	  works closely with TNS, BGX and SerDes to implement the
+	  functions replacing and virtualizing those of a typical
+	  standalone PCIe NIC chip.
+
+	  If you have a Cavium Thunder board, say Y.
+
+if NET_VENDOR_CAVIUM
+
+config THUNDER_NIC_PF
+	tristate "Thunder Physical function driver"
+	default NET_VENDOR_CAVIUM
+	select THUNDER_NIC_BGX
+	---help---
+	  This driver supports Thunder's NIC physical function.
+
+config THUNDER_NIC_VF
+	tristate "Thunder Virtual function driver"
+	default NET_VENDOR_CAVIUM
+	---help---
+	  This driver supports Thunder's NIC virtual function
+
+config	THUNDER_NIC_BGX
+	tristate "Thunder MAC interface driver (BGX)"
+	default NET_VENDOR_CAVIUM
+	---help---
+	  This driver supports programming and controlling of MAC
+	  interface from NIC physical function driver.
+
+endif # NET_VENDOR_CAVIUM

drivers/net/ethernet/cavium/Makefile

@@ -0,0 +1,5 @@
+#
+# Makefile for the Cavium ethernet device drivers.
+#
+
+obj-$(CONFIG_NET_VENDOR_CAVIUM) += thunder/

drivers/net/ethernet/cavium/thunder/Makefile

@@ -0,0 +1,11 @@
+#
+# Makefile for Cavium's Thunder ethernet device
+#
+
+obj-$(CONFIG_THUNDER_NIC_BGX) += thunder_bgx.o
+obj-$(CONFIG_THUNDER_NIC_PF) += nicpf.o
+obj-$(CONFIG_THUNDER_NIC_VF) += nicvf.o
+
+nicpf-y := nic_main.o
+nicvf-y := nicvf_main.o nicvf_queues.o
+nicvf-y += nicvf_ethtool.o