net: Add EMAC ethernet driver found on Allwinner A10 SoC's

The Allwinner A10 has an ethernet controller that seem to be developped
internally by them.

The exact feature set of this controller is unknown, since there is no
public documentation for this IP, and this driver is mostly the one
published by Allwinner that has been heavily cleaned up.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt

@@ -0,0 +1,22 @@
+* Allwinner EMAC ethernet controller
+
+Required properties:
+- compatible: should be "allwinner,sun4i-emac".
+- reg: address and length of the register set for the device.
+- interrupts: interrupt for the device
+- phy: A phandle to a phy node defining the PHY address (as the reg
+  property, a single integer).
+- clocks: A phandle to the reference clock for this device
+
+Optional properties:
+- (local-)mac-address: mac address to be used by this driver
+
+Example:
+
+emac: ethernet@01c0b000 {
+       compatible = "allwinner,sun4i-emac";
+       reg = <0x01c0b000 0x1000>;
+       interrupts = <55>;
+       clocks = <&ahb_gates 17>;
+       phy = <&phy0>;
+};

drivers/net/ethernet/Kconfig

@@ -20,6 +20,7 @@ config SUNGEM_PHY
 source "drivers/net/ethernet/3com/Kconfig"
 source "drivers/net/ethernet/adaptec/Kconfig"
 source "drivers/net/ethernet/aeroflex/Kconfig"
+source "drivers/net/ethernet/allwinner/Kconfig"
 source "drivers/net/ethernet/alteon/Kconfig"
 source "drivers/net/ethernet/amd/Kconfig"
 source "drivers/net/ethernet/apple/Kconfig"

drivers/net/ethernet/Makefile

@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
 obj-$(CONFIG_NET_VENDOR_8390) += 8390/
 obj-$(CONFIG_NET_VENDOR_ADAPTEC) += adaptec/
 obj-$(CONFIG_GRETH) += aeroflex/
+obj-$(CONFIG_NET_VENDOR_ALLWINNER) += allwinner/
 obj-$(CONFIG_NET_VENDOR_ALTEON) += alteon/
 obj-$(CONFIG_NET_VENDOR_AMD) += amd/
 obj-$(CONFIG_NET_VENDOR_APPLE) += apple/

drivers/net/ethernet/allwinner/Kconfig

@@ -0,0 +1,36 @@
+#
+# Allwinner device configuration
+#
+
+config NET_VENDOR_ALLWINNER
+       bool "Allwinner devices"
+       default y
+       depends on ARCH_SUNXI
+       ---help---
+         If you have a network (Ethernet) card belonging to this
+	 class, say Y and read the Ethernet-HOWTO, available from
+	 <http://www.tldp.org/docs.html#howto>.
+
+	 Note that the answer to this question doesn't directly
+	 affect the kernel: saying N will just cause the configurator
+	 to skip all the questions about Allwinner cards. If you say Y,
+	 you will be asked for your specific card in the following
+	 questions.
+
+if NET_VENDOR_ALLWINNER
+
+config SUN4I_EMAC
+        tristate "Allwinner A10 EMAC support"
+	depends on ARCH_SUNXI
+	depends on OF
+	select CRC32
+	select NET_CORE
+	select MII
+	select PHYLIB
+        ---help---
+          Support for Allwinner A10 EMAC ethernet driver.
+
+          To compile this driver as a module, choose M here.  The module
+          will be called sun4i-emac.
+
+endif # NET_VENDOR_ALLWINNER

drivers/net/ethernet/allwinner/Makefile

@@ -0,0 +1,5 @@
+#
+# Makefile for the Allwinner device drivers.
+#
+
+obj-$(CONFIG_SUN4I_EMAC) += sun4i-emac.o