leds: turris-omnia: use constants instead of macros for color command

Use integer constants directly when building I2C messages for LED color
change command, instead of macros. The command is simple enough to
understand what is going on even without these names.

Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

drivers/leds/leds-turris-omnia.c

@@ -27,14 +27,6 @@
 #define CMD_LED_SET_BRIGHTNESS		7
 #define CMD_LED_GET_BRIGHTNESS		8
 
-#define OMNIA_CMD			0
-
-#define OMNIA_CMD_LED_COLOR_LED		1
-#define OMNIA_CMD_LED_COLOR_R		2
-#define OMNIA_CMD_LED_COLOR_G		3
-#define OMNIA_CMD_LED_COLOR_B		4
-#define OMNIA_CMD_LED_COLOR_LEN		5
-
 struct omnia_led {
 	struct led_classdev_mc mc_cdev;
 	struct mc_subled subled_info[OMNIA_LED_NUM_CHANNELS];
@@ -55,21 +47,21 @@ static int omnia_led_brightness_set_blocking(struct led_classdev *cdev,
 	struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(cdev);
 	struct omnia_leds *leds = dev_get_drvdata(cdev->dev->parent);
 	struct omnia_led *led = to_omnia_led(mc_cdev);
-	u8 buf[OMNIA_CMD_LED_COLOR_LEN], state;
+	u8 buf[5], state;
 	int ret;
 
 	mutex_lock(&leds->lock);
 
 	led_mc_calc_color_components(&led->mc_cdev, brightness);
 
-	buf[OMNIA_CMD] = CMD_LED_COLOR;
-	buf[OMNIA_CMD_LED_COLOR_LED] = led->reg;
-	buf[OMNIA_CMD_LED_COLOR_R] = mc_cdev->subled_info[0].brightness;
-	buf[OMNIA_CMD_LED_COLOR_G] = mc_cdev->subled_info[1].brightness;
-	buf[OMNIA_CMD_LED_COLOR_B] = mc_cdev->subled_info[2].brightness;
+	buf[0] = CMD_LED_COLOR;
+	buf[1] = led->reg;
+	buf[2] = mc_cdev->subled_info[0].brightness;
+	buf[3] = mc_cdev->subled_info[1].brightness;
+	buf[4] = mc_cdev->subled_info[2].brightness;
 
 	state = CMD_LED_STATE_LED(led->reg);
-	if (buf[OMNIA_CMD_LED_COLOR_R] || buf[OMNIA_CMD_LED_COLOR_G] || buf[OMNIA_CMD_LED_COLOR_B])
+	if (buf[2] || buf[3] || buf[4])
 		state |= CMD_LED_STATE_ON;
 
 	ret = i2c_smbus_write_byte_data(leds->client, CMD_LED_STATE, state);
@@ -250,18 +242,18 @@ static int omnia_leds_probe(struct i2c_client *client,
 
 static int omnia_leds_remove(struct i2c_client *client)
 {
-	u8 buf[OMNIA_CMD_LED_COLOR_LEN];
+	u8 buf[5];
 
 	/* put all LEDs into default (HW triggered) mode */
 	i2c_smbus_write_byte_data(client, CMD_LED_MODE,
 				  CMD_LED_MODE_LED(OMNIA_BOARD_LEDS));
 
 	/* set all LEDs color to [255, 255, 255] */
-	buf[OMNIA_CMD] = CMD_LED_COLOR;
-	buf[OMNIA_CMD_LED_COLOR_LED] = OMNIA_BOARD_LEDS;
-	buf[OMNIA_CMD_LED_COLOR_R] = 255;
-	buf[OMNIA_CMD_LED_COLOR_G] = 255;
-	buf[OMNIA_CMD_LED_COLOR_B] = 255;
+	buf[0] = CMD_LED_COLOR;
+	buf[1] = OMNIA_BOARD_LEDS;
+	buf[2] = 255;
+	buf[3] = 255;
+	buf[4] = 255;
 
 	i2c_master_send(client, buf, 5);