Merge tag 'zynqmp-dt-for-v5.6' of https://github.com/Xilinx/linux-xlnx …

…into arm/dt

arm64: dts: zynqmp: DT changes for v5.6

- Switch from fixed to firmware based clock driver
- Wire power domain driver
- Wire all ina226 chips through IIO and IIO hwmon drivers
- Add missing dr_mode property to usb nodes
- Use gpio-line-names property instead of comments
- Use clock-output-names for si570 differentiation
- Minor DT fixes

* tag 'zynqmp-dt-for-v5.6' of https://github.com/Xilinx/linux-xlnx: (21 commits)
  arm64: zynqmp: Add label property to all ina226 on zcu106
  arm64: zynqmp: Enable iio-hwmon for ina226 on zcu106
  arm64: zynqmp: Add label property to all ina226 on zcu102
  arm64: zynqmp: Enable iio-hwmon for ina226 on zcu102
  arm64: zynqmp: Add label property to all ina226 on zcu111
  arm64: zynqmp: Enable iio-hwmon for ina226 on zcu111
  arm64: zynqmp: Enable iio-hwmon for ina226 on zcu100
  arm64: zynqmp: Setup default number of chipselects for zcu100
  arm64: zynqmp: Remove broken-cd from zcu100-revC
  arm64: zynqmp: Fix the si570 clock frequency on zcu111
  arm64: zynqmp: Setup clock-output-names for si570 chips
  arm64: zynqmp: Turn comment to gpio-line-names
  arm64: zynqmp: Fix address for tca6416_u97 chip on zcu104
  arm64: zynqmp: Remove addition number in node name
  arm64: zynqmp: Use ethernet-phy as node name for ethernet phys
  arm64: dts: xilinx: Add the power nodes for zynqmp
  arm64: dts: xilinx: Remove dtsi for fixed clock
  arm64: dts: xilinx: Add the clock nodes for zynqmp
  arm64: zynqmp: Add dr_mode property to usb node
  arm64: dts: zynqmp: Use decimal values for drm-clock properties
  ...

Link: https://lore.kernel.org/r/c70d2efa-9ee2-a764-5248-0e5bfbf29f8a@monstr.eu
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi

@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Clock specification for Xilinx ZynqMP
+ *
+ * (C) Copyright 2017 - 2019, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+/ {
+	pss_ref_clk: pss_ref_clk {
+		u-boot,dm-pre-reloc;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33333333>;
+	};
+
+	video_clk: video_clk {
+		u-boot,dm-pre-reloc;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+
+	pss_alt_ref_clk: pss_alt_ref_clk {
+		u-boot,dm-pre-reloc;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	gt_crx_ref_clk: gt_crx_ref_clk {
+		u-boot,dm-pre-reloc;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <108000000>;
+	};
+
+	aux_ref_clk: aux_ref_clk {
+		u-boot,dm-pre-reloc;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+&can0 {
+	clocks = <&zynqmp_clk CAN0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&can1 {
+	clocks = <&zynqmp_clk CAN1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&cpu0 {
+	clocks = <&zynqmp_clk ACPU>;
+};
+
+&fpd_dma_chan1 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan2 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan3 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan4 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan5 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan6 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan7 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan8 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan1 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan2 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan3 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan4 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan5 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan6 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan7 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan8 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&gem0 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>,
+		 <&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+};
+
+&gem1 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>,
+		 <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+};
+
+&gem2 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_REF>,
+		 <&zynqmp_clk GEM2_TX>, <&zynqmp_clk GEM2_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+};
+
+&gem3 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_REF>,
+		 <&zynqmp_clk GEM3_TX>, <&zynqmp_clk GEM3_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+};
+
+&gpio {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&i2c0 {
+	clocks = <&zynqmp_clk I2C0_REF>;
+};
+
+&i2c1 {
+	clocks = <&zynqmp_clk I2C1_REF>;
+};
+
+&pcie {
+	clocks = <&zynqmp_clk PCIE_REF>;
+};
+
+&sata {
+	clocks = <&zynqmp_clk SATA_REF>;
+};
+
+&sdhci0 {
+	clocks = <&zynqmp_clk SDIO0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&sdhci1 {
+	clocks = <&zynqmp_clk SDIO1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&spi0 {
+	clocks = <&zynqmp_clk SPI0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&spi1 {
+	clocks = <&zynqmp_clk SPI1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc0 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc1 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc2 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc3 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&uart0 {
+	clocks = <&zynqmp_clk UART0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&uart1 {
+	clocks = <&zynqmp_clk UART1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&usb0 {
+	clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+};
+
+&usb1 {
+	clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+};
+
+&watchdog0 {
+	clocks = <&zynqmp_clk WDT>;
+};